[alsa-devel] [PATCH v3 2/5] ALSA: hda: move common hda controller register defines up
Vinod Koul
vinod.koul at intel.com
Wed Apr 1 13:30:59 CEST 2015
From: Jeeja KP <jeeja.kp at intel.com>
The HDA register defines would be accessed by both existing codes as well as
new code, so move it up to include/sound
No code change, fixed few alignment though
Signed-off-by: Jeeja KP <jeeja.kp at intel.com>
Signed-off-by: Vinod Koul <vinod.koul at intel.com>
---
include/sound/hda_registers.h | 168 ++++++++++++++++++++++++++++++++++++++++
sound/pci/hda/hda_controller.h | 164 +--------------------------------------
2 files changed, 169 insertions(+), 163 deletions(-)
create mode 100644 include/sound/hda_registers.h
diff --git a/include/sound/hda_registers.h b/include/sound/hda_registers.h
new file mode 100644
index 000000000000..6afb26191f4d
--- /dev/null
+++ b/include/sound/hda_registers.h
@@ -0,0 +1,168 @@
+#ifndef __SOUND_HDA_REGISTERS_H
+#define __SOUND_HDA_REGISTERS_H
+
+/*
+ * registers
+ */
+#define AZX_REG_GCAP 0x00
+#define AZX_GCAP_64OK (1 << 0) /* 64bit address support */
+#define AZX_GCAP_NSDO (3 << 1) /* # of serial data out signals */
+#define AZX_GCAP_BSS (31 << 3) /* # of bidirectional streams */
+#define AZX_GCAP_ISS (15 << 8) /* # of input streams */
+#define AZX_GCAP_OSS (15 << 12) /* # of output streams */
+#define AZX_REG_VMIN 0x02
+#define AZX_REG_VMAJ 0x03
+#define AZX_REG_OUTPAY 0x04
+#define AZX_REG_INPAY 0x06
+#define AZX_REG_GCTL 0x08
+#define AZX_GCTL_RESET (1 << 0) /* controller reset */
+#define AZX_GCTL_FCNTRL (1 << 1) /* flush control */
+#define AZX_GCTL_UNSOL (1 << 8) /* accept unsol. response enable */
+#define AZX_REG_WAKEEN 0x0c
+#define AZX_REG_STATESTS 0x0e
+#define AZX_REG_GSTS 0x10
+#define AZX_GSTS_FSTS (1 << 1) /* flush status */
+#define AZX_REG_INTCTL 0x20
+#define AZX_REG_INTSTS 0x24
+#define AZX_REG_WALLCLK 0x30 /* 24Mhz source */
+#define AZX_REG_OLD_SSYNC 0x34 /* SSYNC for old ICH */
+#define AZX_REG_SSYNC 0x38
+#define AZX_REG_CORBLBASE 0x40
+#define AZX_REG_CORBUBASE 0x44
+#define AZX_REG_CORBWP 0x48
+#define AZX_REG_CORBRP 0x4a
+#define AZX_CORBRP_RST (1 << 15) /* read pointer reset */
+#define AZX_REG_CORBCTL 0x4c
+#define AZX_CORBCTL_RUN (1 << 1) /* enable DMA */
+#define AZX_CORBCTL_CMEIE (1 << 0) /* enable memory error irq */
+#define AZX_REG_CORBSTS 0x4d
+#define AZX_CORBSTS_CMEI (1 << 0) /* memory error indication */
+#define AZX_REG_CORBSIZE 0x4e
+
+#define AZX_REG_RIRBLBASE 0x50
+#define AZX_REG_RIRBUBASE 0x54
+#define AZX_REG_RIRBWP 0x58
+#define AZX_RIRBWP_RST (1 << 15) /* write pointer reset */
+#define AZX_REG_RINTCNT 0x5a
+#define AZX_REG_RIRBCTL 0x5c
+#define AZX_RBCTL_IRQ_EN (1 << 0) /* enable IRQ */
+#define AZX_RBCTL_DMA_EN (1 << 1) /* enable DMA */
+#define AZX_RBCTL_OVERRUN_EN (1 << 2) /* enable overrun irq */
+#define AZX_REG_RIRBSTS 0x5d
+#define AZX_RBSTS_IRQ (1 << 0) /* response irq */
+#define AZX_RBSTS_OVERRUN (1 << 2) /* overrun irq */
+#define AZX_REG_RIRBSIZE 0x5e
+
+#define AZX_REG_IC 0x60
+#define AZX_REG_IR 0x64
+#define AZX_REG_IRS 0x68
+#define AZX_IRS_VALID (1<<1)
+#define AZX_IRS_BUSY (1<<0)
+
+#define AZX_REG_DPLBASE 0x70
+#define AZX_REG_DPUBASE 0x74
+#define AZX_DPLBASE_ENABLE 0x1 /* Enable position buffer */
+
+/* SD offset: SDI0=0x80, SDI1=0xa0, ... SDO3=0x160 */
+enum { SDI0, SDI1, SDI2, SDI3, SDO0, SDO1, SDO2, SDO3 };
+
+/* stream register offsets from stream base */
+#define AZX_REG_SD_CTL 0x00
+#define AZX_REG_SD_STS 0x03
+#define AZX_REG_SD_LPIB 0x04
+#define AZX_REG_SD_CBL 0x08
+#define AZX_REG_SD_LVI 0x0c
+#define AZX_REG_SD_FIFOW 0x0e
+#define AZX_REG_SD_FIFOSIZE 0x10
+#define AZX_REG_SD_FORMAT 0x12
+#define AZX_REG_SD_BDLPL 0x18
+#define AZX_REG_SD_BDLPU 0x1c
+
+/* PCI space */
+#define AZX_PCIREG_TCSEL 0x44
+
+/*
+ * other constants
+ */
+
+/* max number of fragments - we may use more if allocating more pages for BDL */
+#define BDL_SIZE 4096
+#define AZX_MAX_BDL_ENTRIES (BDL_SIZE / 16)
+#define AZX_MAX_FRAG 32
+/* max buffer size - no h/w limit, you can increase as you like */
+#define AZX_MAX_BUF_SIZE (1024*1024*1024)
+
+/* RIRB int mask: overrun[2], response[0] */
+#define RIRB_INT_RESPONSE 0x01
+#define RIRB_INT_OVERRUN 0x04
+#define RIRB_INT_MASK 0x05
+
+/* STATESTS int mask: S3,SD2,SD1,SD0 */
+#define AZX_DEFAULT_CODECS 4
+#define STATESTS_INT_MASK ((1 << HDA_MAX_CODECS) - 1)
+
+/* SD_CTL bits */
+#define SD_CTL_STREAM_RESET 0x01 /* stream reset bit */
+#define SD_CTL_DMA_START 0x02 /* stream DMA start bit */
+#define SD_CTL_STRIPE (3 << 16) /* stripe control */
+#define SD_CTL_TRAFFIC_PRIO (1 << 18) /* traffic priority */
+#define SD_CTL_DIR (1 << 19) /* bi-directional stream */
+#define SD_CTL_STREAM_TAG_MASK (0xf << 20)
+#define SD_CTL_STREAM_TAG_SHIFT 20
+
+/* SD_CTL and SD_STS */
+#define SD_INT_DESC_ERR 0x10 /* descriptor error interrupt */
+#define SD_INT_FIFO_ERR 0x08 /* FIFO error interrupt */
+#define SD_INT_COMPLETE 0x04 /* completion interrupt */
+#define SD_INT_MASK (SD_INT_DESC_ERR|SD_INT_FIFO_ERR|\
+ SD_INT_COMPLETE)
+
+/* SD_STS */
+#define SD_STS_FIFO_READY 0x20 /* FIFO ready */
+
+/* INTCTL and INTSTS */
+#define AZX_INT_ALL_STREAM 0xff /* all stream interrupts */
+#define AZX_INT_CTRL_EN 0x40000000 /* controller interrupt enable bit */
+#define AZX_INT_GLOBAL_EN 0x80000000 /* global interrupt enable bit */
+
+/* below are so far hardcoded - should read registers in future */
+#define AZX_MAX_CORB_ENTRIES 256
+#define AZX_MAX_RIRB_ENTRIES 256
+
+/* HD Audio class code */
+#define PCI_CLASS_MULTIMEDIA_HD_AUDIO 0x0403
+
+/*
+ * macros for easy use
+ */
+
+#define azx_writel(chip, reg, value) \
+ ((chip)->ops->reg_writel(value, (chip)->remap_addr + AZX_REG_##reg))
+#define azx_readl(chip, reg) \
+ ((chip)->ops->reg_readl((chip)->remap_addr + AZX_REG_##reg))
+#define azx_writew(chip, reg, value) \
+ ((chip)->ops->reg_writew(value, (chip)->remap_addr + AZX_REG_##reg))
+#define azx_readw(chip, reg) \
+ ((chip)->ops->reg_readw((chip)->remap_addr + AZX_REG_##reg))
+#define azx_writeb(chip, reg, value) \
+ ((chip)->ops->reg_writeb(value, (chip)->remap_addr + AZX_REG_##reg))
+#define azx_readb(chip, reg) \
+ ((chip)->ops->reg_readb((chip)->remap_addr + AZX_REG_##reg))
+
+#define azx_sd_writel(chip, dev, reg, value) \
+ ((chip)->ops->reg_writel(value, (dev)->sd_addr + AZX_REG_##reg))
+#define azx_sd_readl(chip, dev, reg) \
+ ((chip)->ops->reg_readl((dev)->sd_addr + AZX_REG_##reg))
+#define azx_sd_writew(chip, dev, reg, value) \
+ ((chip)->ops->reg_writew(value, (dev)->sd_addr + AZX_REG_##reg))
+#define azx_sd_readw(chip, dev, reg) \
+ ((chip)->ops->reg_readw((dev)->sd_addr + AZX_REG_##reg))
+#define azx_sd_writeb(chip, dev, reg, value) \
+ ((chip)->ops->reg_writeb(value, (dev)->sd_addr + AZX_REG_##reg))
+#define azx_sd_readb(chip, dev, reg) \
+ ((chip)->ops->reg_readb((dev)->sd_addr + AZX_REG_##reg))
+
+#define azx_has_pm_runtime(chip) \
+ (!AZX_DCAPS_PM_RUNTIME || ((chip)->driver_caps & AZX_DCAPS_PM_RUNTIME))
+
+#endif
diff --git a/sound/pci/hda/hda_controller.h b/sound/pci/hda/hda_controller.h
index 2aa75e34a718..608e31597c22 100644
--- a/sound/pci/hda/hda_controller.h
+++ b/sound/pci/hda/hda_controller.h
@@ -20,136 +20,9 @@
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/initval.h>
+#include <sound/hda_registers.h>
#include "hda_codec.h"
-/*
- * registers
- */
-#define AZX_REG_GCAP 0x00
-#define AZX_GCAP_64OK (1 << 0) /* 64bit address support */
-#define AZX_GCAP_NSDO (3 << 1) /* # of serial data out signals */
-#define AZX_GCAP_BSS (31 << 3) /* # of bidirectional streams */
-#define AZX_GCAP_ISS (15 << 8) /* # of input streams */
-#define AZX_GCAP_OSS (15 << 12) /* # of output streams */
-#define AZX_REG_VMIN 0x02
-#define AZX_REG_VMAJ 0x03
-#define AZX_REG_OUTPAY 0x04
-#define AZX_REG_INPAY 0x06
-#define AZX_REG_GCTL 0x08
-#define AZX_GCTL_RESET (1 << 0) /* controller reset */
-#define AZX_GCTL_FCNTRL (1 << 1) /* flush control */
-#define AZX_GCTL_UNSOL (1 << 8) /* accept unsol. response enable */
-#define AZX_REG_WAKEEN 0x0c
-#define AZX_REG_STATESTS 0x0e
-#define AZX_REG_GSTS 0x10
-#define AZX_GSTS_FSTS (1 << 1) /* flush status */
-#define AZX_REG_INTCTL 0x20
-#define AZX_REG_INTSTS 0x24
-#define AZX_REG_WALLCLK 0x30 /* 24Mhz source */
-#define AZX_REG_OLD_SSYNC 0x34 /* SSYNC for old ICH */
-#define AZX_REG_SSYNC 0x38
-#define AZX_REG_CORBLBASE 0x40
-#define AZX_REG_CORBUBASE 0x44
-#define AZX_REG_CORBWP 0x48
-#define AZX_REG_CORBRP 0x4a
-#define AZX_CORBRP_RST (1 << 15) /* read pointer reset */
-#define AZX_REG_CORBCTL 0x4c
-#define AZX_CORBCTL_RUN (1 << 1) /* enable DMA */
-#define AZX_CORBCTL_CMEIE (1 << 0) /* enable memory error irq */
-#define AZX_REG_CORBSTS 0x4d
-#define AZX_CORBSTS_CMEI (1 << 0) /* memory error indication */
-#define AZX_REG_CORBSIZE 0x4e
-
-#define AZX_REG_RIRBLBASE 0x50
-#define AZX_REG_RIRBUBASE 0x54
-#define AZX_REG_RIRBWP 0x58
-#define AZX_RIRBWP_RST (1 << 15) /* write pointer reset */
-#define AZX_REG_RINTCNT 0x5a
-#define AZX_REG_RIRBCTL 0x5c
-#define AZX_RBCTL_IRQ_EN (1 << 0) /* enable IRQ */
-#define AZX_RBCTL_DMA_EN (1 << 1) /* enable DMA */
-#define AZX_RBCTL_OVERRUN_EN (1 << 2) /* enable overrun irq */
-#define AZX_REG_RIRBSTS 0x5d
-#define AZX_RBSTS_IRQ (1 << 0) /* response irq */
-#define AZX_RBSTS_OVERRUN (1 << 2) /* overrun irq */
-#define AZX_REG_RIRBSIZE 0x5e
-
-#define AZX_REG_IC 0x60
-#define AZX_REG_IR 0x64
-#define AZX_REG_IRS 0x68
-#define AZX_IRS_VALID (1<<1)
-#define AZX_IRS_BUSY (1<<0)
-
-#define AZX_REG_DPLBASE 0x70
-#define AZX_REG_DPUBASE 0x74
-#define AZX_DPLBASE_ENABLE 0x1 /* Enable position buffer */
-
-/* SD offset: SDI0=0x80, SDI1=0xa0, ... SDO3=0x160 */
-enum { SDI0, SDI1, SDI2, SDI3, SDO0, SDO1, SDO2, SDO3 };
-
-/* stream register offsets from stream base */
-#define AZX_REG_SD_CTL 0x00
-#define AZX_REG_SD_STS 0x03
-#define AZX_REG_SD_LPIB 0x04
-#define AZX_REG_SD_CBL 0x08
-#define AZX_REG_SD_LVI 0x0c
-#define AZX_REG_SD_FIFOW 0x0e
-#define AZX_REG_SD_FIFOSIZE 0x10
-#define AZX_REG_SD_FORMAT 0x12
-#define AZX_REG_SD_BDLPL 0x18
-#define AZX_REG_SD_BDLPU 0x1c
-
-/* PCI space */
-#define AZX_PCIREG_TCSEL 0x44
-
-/*
- * other constants
- */
-
-/* max number of fragments - we may use more if allocating more pages for BDL */
-#define BDL_SIZE 4096
-#define AZX_MAX_BDL_ENTRIES (BDL_SIZE / 16)
-#define AZX_MAX_FRAG 32
-/* max buffer size - no h/w limit, you can increase as you like */
-#define AZX_MAX_BUF_SIZE (1024*1024*1024)
-
-/* RIRB int mask: overrun[2], response[0] */
-#define RIRB_INT_RESPONSE 0x01
-#define RIRB_INT_OVERRUN 0x04
-#define RIRB_INT_MASK 0x05
-
-/* STATESTS int mask: S3,SD2,SD1,SD0 */
-#define AZX_DEFAULT_CODECS 4
-#define STATESTS_INT_MASK ((1 << HDA_MAX_CODECS) - 1)
-
-/* SD_CTL bits */
-#define SD_CTL_STREAM_RESET 0x01 /* stream reset bit */
-#define SD_CTL_DMA_START 0x02 /* stream DMA start bit */
-#define SD_CTL_STRIPE (3 << 16) /* stripe control */
-#define SD_CTL_TRAFFIC_PRIO (1 << 18) /* traffic priority */
-#define SD_CTL_DIR (1 << 19) /* bi-directional stream */
-#define SD_CTL_STREAM_TAG_MASK (0xf << 20)
-#define SD_CTL_STREAM_TAG_SHIFT 20
-
-/* SD_CTL and SD_STS */
-#define SD_INT_DESC_ERR 0x10 /* descriptor error interrupt */
-#define SD_INT_FIFO_ERR 0x08 /* FIFO error interrupt */
-#define SD_INT_COMPLETE 0x04 /* completion interrupt */
-#define SD_INT_MASK (SD_INT_DESC_ERR|SD_INT_FIFO_ERR|\
- SD_INT_COMPLETE)
-
-/* SD_STS */
-#define SD_STS_FIFO_READY 0x20 /* FIFO ready */
-
-/* INTCTL and INTSTS */
-#define AZX_INT_ALL_STREAM 0xff /* all stream interrupts */
-#define AZX_INT_CTRL_EN 0x40000000 /* controller interrupt enable bit */
-#define AZX_INT_GLOBAL_EN 0x80000000 /* global interrupt enable bit */
-
-/* below are so far hardcoded - should read registers in future */
-#define AZX_MAX_CORB_ENTRIES 256
-#define AZX_MAX_RIRB_ENTRIES 256
-
/* driver quirks (capabilities) */
/* bits 0-7 are used for indicating driver type */
#define AZX_DCAPS_NO_TCSEL (1 << 8) /* No Intel TCSEL bit */
@@ -182,9 +55,6 @@ enum {
AZX_SNOOP_TYPE_NVIDIA,
};
-/* HD Audio class code */
-#define PCI_CLASS_MULTIMEDIA_HD_AUDIO 0x0403
-
struct azx_dev {
struct snd_dma_buffer bdl; /* BDL buffer */
u32 *posbuf; /* position buffer pointer */
@@ -372,38 +242,6 @@ struct azx {
#define azx_snoop(chip) true
#endif
-/*
- * macros for easy use
- */
-
-#define azx_writel(chip, reg, value) \
- ((chip)->ops->reg_writel(value, (chip)->remap_addr + AZX_REG_##reg))
-#define azx_readl(chip, reg) \
- ((chip)->ops->reg_readl((chip)->remap_addr + AZX_REG_##reg))
-#define azx_writew(chip, reg, value) \
- ((chip)->ops->reg_writew(value, (chip)->remap_addr + AZX_REG_##reg))
-#define azx_readw(chip, reg) \
- ((chip)->ops->reg_readw((chip)->remap_addr + AZX_REG_##reg))
-#define azx_writeb(chip, reg, value) \
- ((chip)->ops->reg_writeb(value, (chip)->remap_addr + AZX_REG_##reg))
-#define azx_readb(chip, reg) \
- ((chip)->ops->reg_readb((chip)->remap_addr + AZX_REG_##reg))
-
-#define azx_sd_writel(chip, dev, reg, value) \
- ((chip)->ops->reg_writel(value, (dev)->sd_addr + AZX_REG_##reg))
-#define azx_sd_readl(chip, dev, reg) \
- ((chip)->ops->reg_readl((dev)->sd_addr + AZX_REG_##reg))
-#define azx_sd_writew(chip, dev, reg, value) \
- ((chip)->ops->reg_writew(value, (dev)->sd_addr + AZX_REG_##reg))
-#define azx_sd_readw(chip, dev, reg) \
- ((chip)->ops->reg_readw((dev)->sd_addr + AZX_REG_##reg))
-#define azx_sd_writeb(chip, dev, reg, value) \
- ((chip)->ops->reg_writeb(value, (dev)->sd_addr + AZX_REG_##reg))
-#define azx_sd_readb(chip, dev, reg) \
- ((chip)->ops->reg_readb((dev)->sd_addr + AZX_REG_##reg))
-
-#define azx_has_pm_runtime(chip) \
- (!AZX_DCAPS_PM_RUNTIME || ((chip)->driver_caps & AZX_DCAPS_PM_RUNTIME))
/* PCM setup */
static inline struct azx_dev *get_azx_dev(struct snd_pcm_substream *substream)
--
1.7.9.5
More information about the Alsa-devel
mailing list