[alsa-devel] [PATCH 03/32] ASoC: wm8510: Cleanup manual bias level transitions

[Lars-Peter Clausen]

Set the CODEC driver's suspend_bias_off flag rather than manually going to
SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes
the code a bit shorter and cleaner.

Since the ASoC core now takes care of setting the bias level to
SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually
anymore either.

The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe()
can also be removed as the core will automatically do this after the CODEC
has been probed.

Signed-off-by: Lars-Peter Clausen <lars at metafoo.de>
---
 sound/soc/codecs/wm8510.c | 26 +-------------------------
 1 file changed, 1 insertion(+), 25 deletions(-)

diff --git a/sound/soc/codecs/wm8510.c b/sound/soc/codecs/wm8510.c
index e11127f..8736ad0 100644
--- a/sound/soc/codecs/wm8510.c
+++ b/sound/soc/codecs/wm8510.c
@@ -575,41 +575,17 @@ static struct snd_soc_dai_driver wm8510_dai = {
 	.symmetric_rates = 1,
 };
 
-static int wm8510_suspend(struct snd_soc_codec *codec)
-{
-	wm8510_set_bias_level(codec, SND_SOC_BIAS_OFF);
-	return 0;
-}
-
-static int wm8510_resume(struct snd_soc_codec *codec)
-{
-	wm8510_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
-	return 0;
-}
-
 static int wm8510_probe(struct snd_soc_codec *codec)
 {
 	wm8510_reset(codec);
 
-	/* power on device */
-	wm8510_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
-
-	return 0;
-}
-
-/* power down chip */
-static int wm8510_remove(struct snd_soc_codec *codec)
-{
-	wm8510_set_bias_level(codec, SND_SOC_BIAS_OFF);
 	return 0;
 }
 
 static struct snd_soc_codec_driver soc_codec_dev_wm8510 = {
 	.probe =	wm8510_probe,
-	.remove =	wm8510_remove,
-	.suspend =	wm8510_suspend,
-	.resume =	wm8510_resume,
 	.set_bias_level = wm8510_set_bias_level,
+	.suspend_bias_off = true,
 
 	.controls = wm8510_snd_controls,
 	.num_controls = ARRAY_SIZE(wm8510_snd_controls),
-- 
1.8.0