[alsa-devel] [PATCH RFC 09/10] ALSA: usb-audio: Add resume support for MicroII SPDIF ctls
Takashi Iwai
tiwai at suse.de
Thu Nov 20 18:33:34 CET 2014
Like the previous fixes, the mixer accessors are converted to use
usb_mixer_elem_list objects. In addition, the proper shutdown check
are put in get and put callbacks.
Signed-off-by: Takashi Iwai <tiwai at suse.de>
---
sound/usb/mixer_quirks.c | 135 ++++++++++++++++++++++++++++++++---------------
1 file changed, 93 insertions(+), 42 deletions(-)
diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c
index 29afad6aac04..1fae956d6692 100644
--- a/sound/usb/mixer_quirks.c
+++ b/sound/usb/mixer_quirks.c
@@ -1509,7 +1509,8 @@ static int snd_microii_spdif_info(struct snd_kcontrol *kcontrol,
static int snd_microii_spdif_default_get(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
- struct usb_mixer_interface *mixer = snd_kcontrol_chip(kcontrol);
+ struct usb_mixer_elem_list *list = snd_kcontrol_chip(kcontrol);
+ struct snd_usb_audio *chip = list->mixer->chip;
int err;
struct usb_interface *iface;
struct usb_host_interface *alts;
@@ -1517,17 +1518,23 @@ static int snd_microii_spdif_default_get(struct snd_kcontrol *kcontrol,
unsigned char data[3];
int rate;
+ down_read(&chip->shutdown_rwsem);
+ if (chip->shutdown) {
+ err = -ENODEV;
+ goto end;
+ }
+
ucontrol->value.iec958.status[0] = kcontrol->private_value & 0xff;
ucontrol->value.iec958.status[1] = (kcontrol->private_value >> 8) & 0xff;
ucontrol->value.iec958.status[2] = 0x00;
/* use known values for that card: interface#1 altsetting#1 */
- iface = usb_ifnum_to_if(mixer->chip->dev, 1);
+ iface = usb_ifnum_to_if(chip->dev, 1);
alts = &iface->altsetting[1];
ep = get_endpoint(alts, 0)->bEndpointAddress;
- err = snd_usb_ctl_msg(mixer->chip->dev,
- usb_rcvctrlpipe(mixer->chip->dev, 0),
+ err = snd_usb_ctl_msg(chip->dev,
+ usb_rcvctrlpipe(chip->dev, 0),
UAC_GET_CUR,
USB_TYPE_CLASS | USB_RECIP_ENDPOINT | USB_DIR_IN,
UAC_EP_CS_ATTR_SAMPLE_RATE << 8,
@@ -1542,22 +1549,27 @@ static int snd_microii_spdif_default_get(struct snd_kcontrol *kcontrol,
IEC958_AES3_CON_FS_48000 : IEC958_AES3_CON_FS_44100;
err = 0;
-end:
+ end:
+ up_read(&chip->shutdown_rwsem);
return err;
}
-static int snd_microii_spdif_default_put(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
+static int snd_microii_spdif_default_update(struct usb_mixer_elem_list *list)
{
- struct usb_mixer_interface *mixer = snd_kcontrol_chip(kcontrol);
- int err;
+ struct snd_usb_audio *chip = list->mixer->chip;
+ unsigned int pval = list->kctl->private_value;
u8 reg;
- unsigned long priv_backup = kcontrol->private_value;
+ int err;
+
+ down_read(&chip->shutdown_rwsem);
+ if (chip->shutdown) {
+ err = -ENODEV;
+ goto end;
+ }
- reg = ((ucontrol->value.iec958.status[1] & 0x0f) << 4) |
- (ucontrol->value.iec958.status[0] & 0x0f);
- err = snd_usb_ctl_msg(mixer->chip->dev,
- usb_sndctrlpipe(mixer->chip->dev, 0),
+ reg = ((pval >> 4) & 0xf0) | (pval & 0x0f);
+ err = snd_usb_ctl_msg(chip->dev,
+ usb_sndctrlpipe(chip->dev, 0),
UAC_SET_CUR,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER,
reg,
@@ -1567,15 +1579,10 @@ static int snd_microii_spdif_default_put(struct snd_kcontrol *kcontrol,
if (err < 0)
goto end;
- kcontrol->private_value &= 0xfffff0f0;
- kcontrol->private_value |= (ucontrol->value.iec958.status[1] & 0x0f) << 8;
- kcontrol->private_value |= (ucontrol->value.iec958.status[0] & 0x0f);
-
- reg = (ucontrol->value.iec958.status[0] & IEC958_AES0_NONAUDIO) ?
- 0xa0 : 0x20;
- reg |= (ucontrol->value.iec958.status[1] >> 4) & 0x0f;
- err = snd_usb_ctl_msg(mixer->chip->dev,
- usb_sndctrlpipe(mixer->chip->dev, 0),
+ reg = (pval & IEC958_AES0_NONAUDIO) ? 0xa0 : 0x20;
+ reg |= (pval >> 12) & 0x0f;
+ err = snd_usb_ctl_msg(chip->dev,
+ usb_sndctrlpipe(chip->dev, 0),
UAC_SET_CUR,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER,
reg,
@@ -1585,16 +1592,36 @@ static int snd_microii_spdif_default_put(struct snd_kcontrol *kcontrol,
if (err < 0)
goto end;
- kcontrol->private_value &= 0xffff0fff;
- kcontrol->private_value |= (ucontrol->value.iec958.status[1] & 0xf0) << 8;
+ end:
+ up_read(&chip->shutdown_rwsem);
+ return err;
+}
+
+static int snd_microii_spdif_default_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct usb_mixer_elem_list *list = snd_kcontrol_chip(kcontrol);
+ unsigned int pval, pval_old;
+ int err;
+
+ pval = pval_old = kcontrol->private_value;
+ pval &= 0xfffff0f0;
+ pval |= (ucontrol->value.iec958.status[1] & 0x0f) << 8;
+ pval |= (ucontrol->value.iec958.status[0] & 0x0f);
+
+ pval &= 0xffff0fff;
+ pval |= (ucontrol->value.iec958.status[1] & 0xf0) << 8;
/* The frequency bits in AES3 cannot be set via register access. */
/* Silently ignore any bits from the request that cannot be set. */
- err = (priv_backup != kcontrol->private_value);
-end:
- return err;
+ if (pval == pval_old)
+ return 0;
+
+ kcontrol->private_value = pval;
+ err = snd_microii_spdif_default_update(list);
+ return err < 0 ? err : 1;
}
static int snd_microii_spdif_mask_get(struct snd_kcontrol *kcontrol,
@@ -1616,15 +1643,20 @@ static int snd_microii_spdif_switch_get(struct snd_kcontrol *kcontrol,
return 0;
}
-static int snd_microii_spdif_switch_put(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
+static int snd_microii_spdif_switch_update(struct usb_mixer_elem_list *list)
{
- struct usb_mixer_interface *mixer = snd_kcontrol_chip(kcontrol);
+ struct snd_usb_audio *chip = list->mixer->chip;
+ u8 reg = list->kctl->private_value;
int err;
- u8 reg = ucontrol->value.integer.value[0] ? 0x28 : 0x2a;
- err = snd_usb_ctl_msg(mixer->chip->dev,
- usb_sndctrlpipe(mixer->chip->dev, 0),
+ down_read(&chip->shutdown_rwsem);
+ if (chip->shutdown) {
+ err = -ENODEV;
+ goto end;
+ }
+
+ err = snd_usb_ctl_msg(chip->dev,
+ usb_sndctrlpipe(chip->dev, 0),
UAC_SET_CUR,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER,
reg,
@@ -1632,15 +1664,27 @@ static int snd_microii_spdif_switch_put(struct snd_kcontrol *kcontrol,
NULL,
0);
- if (!err) {
- err = (reg != (kcontrol->private_value & 0x0ff));
- if (err)
- kcontrol->private_value = reg;
- }
-
+ end:
+ up_read(&chip->shutdown_rwsem);
return err;
}
+static int snd_microii_spdif_switch_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct usb_mixer_elem_list *list = snd_kcontrol_chip(kcontrol);
+ u8 reg;
+ int err;
+
+ reg = ucontrol->value.integer.value[0] ? 0x28 : 0x2a;
+ if (reg != list->kctl->private_value)
+ return 0;
+
+ kcontrol->private_value = reg;
+ err = snd_microii_spdif_switch_update(list);
+ return err < 0 ? err : 1;
+}
+
static struct snd_kcontrol_new snd_microii_mixer_spdif[] = {
{
.iface = SNDRV_CTL_ELEM_IFACE_PCM,
@@ -1670,10 +1714,17 @@ static struct snd_kcontrol_new snd_microii_mixer_spdif[] = {
static int snd_microii_controls_create(struct usb_mixer_interface *mixer)
{
int err, i;
+ static usb_mixer_elem_resume_func resume_funcs[] = {
+ snd_microii_spdif_default_update,
+ NULL,
+ snd_microii_spdif_switch_update
+ };
for (i = 0; i < ARRAY_SIZE(snd_microii_mixer_spdif); ++i) {
- err = snd_ctl_add(mixer->chip->card,
- snd_ctl_new1(&snd_microii_mixer_spdif[i], mixer));
+ err = add_single_ctl_with_resume(mixer, 0,
+ resume_funcs[i],
+ &snd_microii_mixer_spdif[i],
+ NULL);
if (err < 0)
return err;
}
--
2.1.3
More information about the Alsa-devel
mailing list