[alsa-devel] [PATCH 13/15] ASoC: SND_S3C_DMA_LEGACY needs S3C24XX_DMA
Heiko Stübner
heiko at sntech.de
Fri May 2 12:25:58 CEST 2014
Hi Arnd,
Am Freitag, 2. Mai 2014, 00:35:21 schrieb Arnd Bergmann:
> On Thursday 01 May 2014 12:11:25 Mark Brown wrote:
> > On Tue, Apr 29, 2014 at 07:18:34PM +0800, Xia Kaixu wrote:
> > > From: Arnd Bergmann <arnd at arndb.de>
> > >
> > > SND_S3C_DMA_LEGACY can only be set on S3C24xx, which does not
> > > (yet) support the dmaengine framework, so samsung_dma_get_ops()
> >
> > > fails to link if S3C24XX_DMA is disabled:
> > Why is the fix for this not to ensure that s3c24xx always enables the
> > DMA controller - how likely is it that it would be sane to build a
> > kernel without DMA after all?
>
> S3C24XX_DMA is only needed for ASoC and for s3cmci. The latter
> uses 'depends on S3C24XX_DMA'. arch/arm/configs/tct_hammer_defconfig
> is an example of a configuration that does not include DMA because
> it uses neither of the two drivers.
>
> On a related topic, I looked at the overall DMA situation for
> plat-samsung again now, and it looks much nicer now than it used to,
> with mach-s3c64xx fully migrated to dmaengine, so there might be an
> even better way to deal with this.
>
> From all I can tell, sound/soc/samsung is the only remaining user
> of the plat/dma.h interfaces, and there is only one other driver
> using the s3c24xx_dma interface directly, drivers/mmc/host/s3cmci.c.
>
> How about the patch below?
> 8<-------
> ASoC: s3c24xx: use legacy DMA interface directly
>
> The samsung platform code has a wrapper around the legacy s3c24xx
> DMA API as an alternative to the dmaengine API. This is only used
> by the legacy s3c24xx sound support, which is never used in combination
> with the dmaengine API.
Just to mention, we have a dmaengine driver for s3c24xx :-) . Correct
platform-data is present for all s3c24xx socs (in mach-s3c24xx/common.c) .
Mark already removed support for the legacy API from the s3c64xx spi driver
(used by s3c2416 and s3c2443), so I guess to way forward would be to "simply"
convert asoc and s3cmci to dmaengine and get rid of it altogether.
I just never had hardware using the old mci driver or with any previously
working sound and didn't trust my experience to be enough to be able to do
such a conversion "on the fly" like you below in the opposite direction ;-)
Heiko
>
> We can simplify the ASoC code significantly, and thereby completely
> obsoleting arch/arm/plat-samsung/dma-ops.c,
> arch/arm/plat-samsung/s3c-dma-ops.c and
> arch/arm/plat-samsung/include/plat/dma-ops.h.
>
> This patch achieves this by open-coding the implementation of this
> wrapper, which ends up saving us more code than we have to add.
> s3c24xx does not support cyclic DMA, so anything referring to that
> gets deleted in the process.
>
> The plat-samsung dma wrapper code is now dead code and can be removed
> subsequently.
>
> Signed-off--by: Arnd Bergmann <arnd at arndb.de>
> ---
>
> sound/soc/samsung/ac97.c | 10 ++----
> sound/soc/samsung/dma.c | 79
> +++++++++++++++--------------------------------- sound/soc/samsung/dma.h |
> 2 --
> 3 files changed, 27 insertions(+), 64 deletions(-)
>
> diff --git a/sound/soc/samsung/ac97.c b/sound/soc/samsung/ac97.c
> index 76b072b..28fe097 100644
> --- a/sound/soc/samsung/ac97.c
> +++ b/sound/soc/samsung/ac97.c
> @@ -253,10 +253,7 @@ static int s3c_ac97_trigger(struct snd_pcm_substream
> *substream, int cmd,
>
> writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
>
> - if (!dma_data->ops)
> - dma_data->ops = samsung_dma_get_ops();
> -
> - dma_data->ops->started(dma_data->channel);
> + s3c2410_dma_ctrl(dma_data->channel, S3C2410_DMAOP_STARTED);
>
> return 0;
> }
> @@ -287,10 +284,7 @@ static int s3c_ac97_mic_trigger(struct
> snd_pcm_substream *substream,
>
> writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
>
> - if (!dma_data->ops)
> - dma_data->ops = samsung_dma_get_ops();
> -
> - dma_data->ops->started(dma_data->channel);
> + s3c2410_dma_ctrl(dma_data->channel, S3C2410_DMAOP_STARTED);
>
> return 0;
> }
> diff --git a/sound/soc/samsung/dma.c b/sound/soc/samsung/dma.c
> index dc09b71..3c6e2f2 100644
> --- a/sound/soc/samsung/dma.c
> +++ b/sound/soc/samsung/dma.c
> @@ -54,8 +54,6 @@ struct runtime_data {
> struct s3c_dma_params *params;
> };
>
> -static void audio_buffdone(void *data);
> -
> /* dma_enqueue
> *
> * place a dma buffer onto the queue for the dma system
> @@ -66,7 +64,6 @@ static void dma_enqueue(struct snd_pcm_substream
> *substream) struct runtime_data *prtd = substream->runtime->private_data;
> dma_addr_t pos = prtd->dma_pos;
> unsigned int limit;
> - struct samsung_dma_prep dma_info;
>
> pr_debug("Entered %s\n", __func__);
>
> @@ -75,33 +72,11 @@ static void dma_enqueue(struct snd_pcm_substream
> *substream) pr_debug("%s: loaded %d, limit %d\n",
> __func__, prtd->dma_loaded, limit);
>
> - dma_info.cap = (samsung_dma_has_circular() ? DMA_CYCLIC : DMA_SLAVE);
> - dma_info.direction =
> - (substream->stream == SNDRV_PCM_STREAM_PLAYBACK
> - ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM);
> - dma_info.fp = audio_buffdone;
> - dma_info.fp_param = substream;
> - dma_info.period = prtd->dma_period;
> - dma_info.len = prtd->dma_period*limit;
> -
> - if (dma_info.cap == DMA_CYCLIC) {
> - dma_info.buf = pos;
> - prtd->params->ops->prepare(prtd->params->ch, &dma_info);
> - prtd->dma_loaded += limit;
> - return;
> - }
> -
> while (prtd->dma_loaded < limit) {
> pr_debug("dma_loaded: %d\n", prtd->dma_loaded);
>
> - if ((pos + dma_info.period) > prtd->dma_end) {
> - dma_info.period = prtd->dma_end - pos;
> - pr_debug("%s: corrected dma len %ld\n",
> - __func__, dma_info.period);
> - }
> -
> - dma_info.buf = pos;
> - prtd->params->ops->prepare(prtd->params->ch, &dma_info);
> + s3c2410_dma_enqueue(prtd->params->channel, substream, pos,
> + prtd->dma_period * limit);
>
> prtd->dma_loaded++;
> pos += prtd->dma_period;
> @@ -112,7 +87,8 @@ static void dma_enqueue(struct snd_pcm_substream
> *substream) prtd->dma_pos = pos;
> }
>
> -static void audio_buffdone(void *data)
> +static void audio_buffdone(struct s3c2410_dma_chan *channel, void *data,
> + int size, enum s3c2410_dma_buffresult res)
> {
> struct snd_pcm_substream *substream = data;
> struct runtime_data *prtd = substream->runtime->private_data;
> @@ -128,10 +104,8 @@ static void audio_buffdone(void *data)
> snd_pcm_period_elapsed(substream);
>
> spin_lock(&prtd->lock);
> - if (!samsung_dma_has_circular()) {
> - prtd->dma_loaded--;
> - dma_enqueue(substream);
> - }
> + prtd->dma_loaded--;
> + dma_enqueue(substream);
> spin_unlock(&prtd->lock);
> }
> }
> @@ -145,8 +119,7 @@ static int dma_hw_params(struct snd_pcm_substream
> *substream, unsigned long totbytes = params_buffer_bytes(params);
> struct s3c_dma_params *dma =
> snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
> - struct samsung_dma_req req;
> - struct samsung_dma_config config;
> + enum dma_transfer_direction direction;
>
> pr_debug("Entered %s\n", __func__);
>
> @@ -164,24 +137,22 @@ static int dma_hw_params(struct snd_pcm_substream
> *substream, pr_debug("params %p, client %p, channel %d\n", prtd->params,
> prtd->params->client, prtd->params->channel);
>
> - prtd->params->ops = samsung_dma_get_ops();
> -
> - req.cap = (samsung_dma_has_circular() ?
> - DMA_CYCLIC : DMA_SLAVE);
> - req.client = prtd->params->client;
> - config.direction =
> - (substream->stream == SNDRV_PCM_STREAM_PLAYBACK
> + direction = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK
> ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM);
> - config.width = prtd->params->dma_size;
> - config.fifo = prtd->params->dma_addr;
> - prtd->params->ch = prtd->params->ops->request(
> - prtd->params->channel, &req, rtd->cpu_dai->dev,
> - prtd->params->ch_name);
> - if (!prtd->params->ch) {
> +
> + if (s3c2410_dma_request(prtd->params->channel,
> + (void*)prtd->params->client, NULL) < 0) {
> pr_err("Failed to allocate DMA channel\n");
> + s3c2410_dma_free(prtd->params->channel,
> + (void*)prtd->params->client);
> return -ENXIO;
> }
> - prtd->params->ops->config(prtd->params->ch, &config);
> + s3c2410_dma_devconfig(prtd->params->channel, direction,
> + prtd->params->dma_addr);
> + s3c2410_dma_config(prtd->params->channel,
> + prtd->params->dma_size);
> + s3c2410_dma_set_buffdone_fn(prtd->params->channel,
> + audio_buffdone);
> }
>
> snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
> @@ -208,9 +179,9 @@ static int dma_hw_free(struct snd_pcm_substream
> *substream) snd_pcm_set_runtime_buffer(substream, NULL);
>
> if (prtd->params) {
> - prtd->params->ops->flush(prtd->params->ch);
> - prtd->params->ops->release(prtd->params->ch,
> - prtd->params->client);
> + s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_FLUSH);
> + s3c2410_dma_free(prtd->params->channel,
> + (void*)prtd->params->client);
> prtd->params = NULL;
> }
>
> @@ -230,7 +201,7 @@ static int dma_prepare(struct snd_pcm_substream
> *substream) return 0;
>
> /* flush the DMA channel */
> - prtd->params->ops->flush(prtd->params->ch);
> + s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_FLUSH);
>
> prtd->dma_loaded = 0;
> prtd->dma_pos = prtd->dma_start;
> @@ -253,12 +224,12 @@ static int dma_trigger(struct snd_pcm_substream
> *substream, int cmd) switch (cmd) {
> case SNDRV_PCM_TRIGGER_START:
> prtd->state |= ST_RUNNING;
> - prtd->params->ops->trigger(prtd->params->ch);
> + s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_START);
> break;
>
> case SNDRV_PCM_TRIGGER_STOP:
> prtd->state &= ~ST_RUNNING;
> - prtd->params->ops->stop(prtd->params->ch);
> + s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_STOP);
> break;
>
> default:
> diff --git a/sound/soc/samsung/dma.h b/sound/soc/samsung/dma.h
> index ad7c0f0..c52fa86 100644
> --- a/sound/soc/samsung/dma.h
> +++ b/sound/soc/samsung/dma.h
> @@ -23,8 +23,6 @@ struct s3c_dma_params {
> int channel; /* Channel ID */
> dma_addr_t dma_addr;
> int dma_size; /* Size of the DMA transfer */
> - unsigned ch;
> - struct samsung_dma_ops *ops;
> char *ch_name;
> struct snd_dmaengine_dai_dma_data dma_data;
> };
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc"
> in the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
More information about the Alsa-devel
mailing list