[alsa-devel] Problems with simple-card

Kuninori Morimoto kuninori.morimoto.gx at gmail.com
Thu Jan 16 01:30:00 CET 2014


> > The main problem is about sysclk: when there is no clock in the DT,
> > you get the clock of the CPU or CODEC DAI. In my system, two clocks
> > are declared in the controller CPU DAI, but there is no .set_sysclk
> > pointer. So, snd_soc_dai_set_sysclk() returns -EINVAL and the card is
> > not created.
> set_sysclk() should be returning -ENOTSUPP in this case as with
> set_fmt() and the generic code then ignoring that error.
> > As I don't know why you need these fmt and sysclk, may you have a
> > look at these problems?
> The overwhelming majority of combinations of devices need a format
> specifying (usually one will be imposed by the system design even if
> both devices could be master).

If my understanding is correct, this patch is the reason ?

(ASoC: simple-card: Add device's module clock selection)
It seems break non .set_sysclk drivers.

More information about the Alsa-devel mailing list