[alsa-devel] [PATCH RFC 3/5] ASoC: tlv320aic31xx: Add DT binding document

[Jyri Sarha]

Initial version of tlv320aic31xx device tree bindings document.

Signed-off-by: Jyri Sarha <jsarha at ti.com>
---
 .../devicetree/bindings/sound/tlv320aic31xx.txt    |   57 ++++++++++++++++++++
 1 file changed, 57 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/tlv320aic31xx.txt

diff --git a/Documentation/devicetree/bindings/sound/tlv320aic31xx.txt b/Documentation/devicetree/bindings/sound/tlv320aic31xx.txt
new file mode 100644
index 0000000..a512b4e
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/tlv320aic31xx.txt
@@ -0,0 +1,57 @@
+Texas Instruments - tlv320aic31xx Codec module
+
+The tlv320aic31xx serial control bus communicates through I2C protocols
+
+Required properties:
+
+- compatible - "string" - One of:
+    "ti,tlv320aic310x" - Generic TLV320AIC31xx with mono speaker amp
+    "ti,tlv320aic311x" - Generic TLV320AIC31xx with stereo speaker amp
+    "ti,tlv320aic3100" - TLV320AIC3100 (mono speaker amp, no MiniDSP)
+    "ti,tlv320aic3110" - TLV320AIC3110 (stereo speaker amp, no MiniDSP)
+    "ti,tlv320aic3120" - TLV320AIC3120 (mono speaker amp, MiniDSP)
+    "ti,tlv320aic3111" - TLV320AIC3111 (stereo speaker amp, MiniDSP)
+
+- reg - <int> -  I2C slave address
+
+
+Optional properties:
+
+- gpio-reset - gpio pin number used for codec reset
+- ai31xx-micbias-vg - MicBias Voltage required.
+	1 - MICBIAS output is powered to 2.0V,
+	2 - MICBIAS output is powered to 2.5V,
+	3 - MICBIAS output is connected to AVDD,
+	If this node is not mentioned or if the value is incorrect, then MicBias
+	is powered down.
+- HPVDD-supply, SPRVDD-supply, SPLVDD-supply, AVDD-supply, IOVDD-supply,
+  DVDD-supply : power supplies for the device as covered in
+  Documentation/devicetree/bindings/regulator/regulator.txt
+
+CODEC output pins:
+  * HPL
+  * HPR
+  * SPL, devices with stereo speaker amp
+  * SPR, devices with stereo speaker amp
+  * SPK, devices with mono speaker amp
+
+CODEC input pins:
+  * MIC1LP
+  * MIC1RP
+  * MIC1LM
+
+The pins can be used in referring sound node's audio-routing property.
+
+Example:
+
+tlv320aic31xx: tlv320aic31xx at 18 {
+	compatible = "ti,tlv320aic311x";
+	reg = <0x18>;
+
+	HPVDD-supply = <&regulator>;
+	SPRVDD-supply = <&regulator>;
+	SPLVDD-supply = <&regulator>;
+	AVDD-supply = <&regulator>;
+	IOVDD-supply = <&regulator>;
+	DVDD-supply = <&regulator>;
+};
-- 
1.7.9.5