[alsa-devel] [PATCH 1/2] ASoC: fsl-spdif: big-endian support

Xiubo Li Li.Xiubo at freescale.com
Tue Feb 11 06:41:15 CET 2014


For most platforms, the CPU and SPDIF device is in the same endianess
mode. While for the LS1 platform, the CPU is in LE mode and the SPDIF
is in BE mode.

Signed-off-by: Xiubo Li <Li.Xiubo at freescale.com>
Cc: Nicolin Chen <Guangyu.Chen at freescale.com>
---
 Documentation/devicetree/bindings/sound/fsl,spdif.txt | 4 ++++
 sound/soc/fsl/fsl_spdif.c                             | 8 +++++++-
 2 files changed, 11 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/sound/fsl,spdif.txt b/Documentation/devicetree/bindings/sound/fsl,spdif.txt
index f2ae335..433ad00 100644
--- a/Documentation/devicetree/bindings/sound/fsl,spdif.txt
+++ b/Documentation/devicetree/bindings/sound/fsl,spdif.txt
@@ -29,6 +29,10 @@ Required properties:
 			can also be referred to TxClk_Source
 			bit of register SPDIF_STC.
 
+   - big-endian : If this property is absent, the native endian mode will
+   be in use as default, or the big endian mode will be in use for all the
+   device registers.
+
 Example:
 
 spdif: spdif at 02004000 {
diff --git a/sound/soc/fsl/fsl_spdif.c b/sound/soc/fsl/fsl_spdif.c
index 8f36f49..2f8ad75 100644
--- a/sound/soc/fsl/fsl_spdif.c
+++ b/sound/soc/fsl/fsl_spdif.c
@@ -83,6 +83,8 @@ struct fsl_spdif_priv {
 	struct snd_dmaengine_dai_dma_data dma_params_tx;
 	struct snd_dmaengine_dai_dma_data dma_params_rx;
 
+	bool big_endian;
+
 	/* The name space will be allocated dynamically */
 	char name[0];
 };
@@ -985,7 +987,7 @@ static bool fsl_spdif_writeable_reg(struct device *dev, unsigned int reg)
 	}
 }
 
-static const struct regmap_config fsl_spdif_regmap_config = {
+static struct regmap_config fsl_spdif_regmap_config = {
 	.reg_bits = 32,
 	.reg_stride = 4,
 	.val_bits = 32,
@@ -1105,6 +1107,10 @@ static int fsl_spdif_probe(struct platform_device *pdev)
 	memcpy(&spdif_priv->cpu_dai_drv, &fsl_spdif_dai, sizeof(fsl_spdif_dai));
 	spdif_priv->cpu_dai_drv.name = spdif_priv->name;
 
+	spdif_priv->big_endian = of_property_read_bool(np, "big-endian");
+	if (spdif_priv->big_endian)
+		fsl_spdif_regmap_config.val_format_endian = REGMAP_ENDIAN_BIG;
+
 	/* Get the addresses and IRQ */
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	regs = devm_ioremap_resource(&pdev->dev, res);
-- 
1.8.4




More information about the Alsa-devel mailing list