[alsa-devel] [PATCH v3 4/5] ASoC: tda998x: adjust the audio hw parameters from EDID

Jean-Francois Moine moinejf at free.fr
Wed Feb 5 10:11:34 CET 2014


On Tue, 4 Feb 2014 18:06:25 +0000
Mark Brown <broonie at kernel.org> wrote:

> On Mon, Jan 27, 2014 at 09:48:54AM +0100, Jean-Francois Moine wrote:
> 
> > +		/* change the snd_soc_pcm_stream values of the driver */
> > +		stream->rates = rate_mask;
> > +		stream->channels_max = max_channels;
> > +		stream->formats = formats;
> 
> > +	/* copy the DAI driver to a writable area */
> > +	dai_drv = devm_kzalloc(&pdev->dev, sizeof(tda998x_dai), GFP_KERNEL);
> > +	if (!dai_drv)
> > +		return -ENOMEM;
> > +	memcpy(dai_drv, tda998x_dai, sizeof(tda998x_dai));
> > +
> 
> The code should be doing this by setting constraints based on the
> current setup rather than by editing the data structure - the expecation
> is very much that the data won't change so this prevents surprises with
> future work on the core.

As it is done in the soc core, in soc_pcm_open(), the runtime hw_params
are initialized after the call to the CODEC startup, and the next CODEC
event is hw_params() when the user has already chosen all the parameters.

So, in the CODEC, I don't see how I could update the parameters
dictated by the EDID otherwise in changing the DAI driver parameters.

-- 
Ken ar c'hentañ	|	      ** Breizh ha Linux atav! **
Jef		|		http://moinejf.free.fr/


More information about the Alsa-devel mailing list