[alsa-devel] [PATCH 4/4] ASoC: fsl-sai: rename big_endian_data to is_msb_first.

Xiubo Li Li.Xiubo at freescale.com
Mon Aug 18 08:52:22 CEST 2014


Signed-off-by: Xiubo Li <Li.Xiubo at freescale.com>
---
 Documentation/devicetree/bindings/sound/fsl-sai.txt | 8 ++++----
 sound/soc/fsl/fsl_sai.c                             | 6 +++---
 sound/soc/fsl/fsl_sai.h                             | 2 +-
 3 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/Documentation/devicetree/bindings/sound/fsl-sai.txt b/Documentation/devicetree/bindings/sound/fsl-sai.txt
index cf7875c..7b0c2d7 100644
--- a/Documentation/devicetree/bindings/sound/fsl-sai.txt
+++ b/Documentation/devicetree/bindings/sound/fsl-sai.txt
@@ -21,9 +21,9 @@ Required properties:
 - big-endian: If this property is absent, the little endian mode will be in
   use as default, or the big endian mode will be in use for all the device
   registers.
-- big-endian-data: If this property is absent, the little endian mode will
-  be in use as default, or the big endian mode will be in use for all the
-  fifo data.
+- msb-first: Configures whether the LSB or the MSB is transmitted first for
+  the fifo data. If this property is absent, the LSB is transmitted first as
+  default, or the MSB is transmitted first.
 - fsl,sai-synchronous-rx: This is a boolean property. If present, indicating
   that SAI will work in the synchronous mode (sync Tx with Rx) which means
   both the transimitter and receiver will send and receive data by following
@@ -54,5 +54,5 @@ sai2: sai at 40031000 {
 	      dmas = <&edma0 0 VF610_EDMA_MUXID0_SAI2_TX>,
 		   <&edma0 0 VF610_EDMA_MUXID0_SAI2_RX>;
 	      big-endian;
-	      big-endian-data;
+	      msb-first;
 };
diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c
index 82741f4..057c31a 100644
--- a/sound/soc/fsl/fsl_sai.c
+++ b/sound/soc/fsl/fsl_sai.c
@@ -175,7 +175,7 @@ static int fsl_sai_set_dai_fmt_tr(struct snd_soc_dai *cpu_dai,
 	bool tx = fsl_dir == FSL_FMT_TRANSMITTER;
 	u32 val_cr2 = 0, val_cr4 = 0;
 
-	if (!sai->big_endian_data)
+	if (!sai->is_msb_first)
 		val_cr4 |= FSL_SAI_CR4_MF;
 
 	/* DAI mode */
@@ -304,7 +304,7 @@ static int fsl_sai_hw_params(struct snd_pcm_substream *substream,
 	val_cr5 |= FSL_SAI_CR5_WNW(word_width);
 	val_cr5 |= FSL_SAI_CR5_W0W(word_width);
 
-	if (sai->big_endian_data)
+	if (sai->is_msb_first)
 		val_cr5 |= FSL_SAI_CR5_FBT(0);
 	else
 		val_cr5 |= FSL_SAI_CR5_FBT(word_width - 1);
@@ -573,7 +573,7 @@ static int fsl_sai_probe(struct platform_device *pdev)
 	if (of_device_is_compatible(pdev->dev.of_node, "fsl,imx6sx-sai"))
 		sai->sai_on_imx = true;
 
-	sai->big_endian_data = of_property_read_bool(np, "big-endian-data");
+	sai->is_msb_first = of_property_read_bool(np, "msb-first");
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	base = devm_ioremap_resource(&pdev->dev, res);
diff --git a/sound/soc/fsl/fsl_sai.h b/sound/soc/fsl/fsl_sai.h
index 2cded44..7c76e8d 100644
--- a/sound/soc/fsl/fsl_sai.h
+++ b/sound/soc/fsl/fsl_sai.h
@@ -132,7 +132,7 @@ struct fsl_sai {
 	struct clk *bus_clk;
 	struct clk *mclk_clk[FSL_SAI_MCLK_MAX];
 
-	bool big_endian_data;
+	bool is_msb_first;
 	bool is_dsp_mode;
 	bool sai_on_imx;
 	bool synchronous[2];
-- 
1.8.5



More information about the Alsa-devel mailing list