[alsa-devel] [PATCH v4 12/17] ASoC: fsl-ssi: set bitclock in master mode from hw_params

Markus Pargmann mpa at pengutronix.de
Mon Apr 28 12:54:53 CEST 2014


From: Sascha Hauer <s.hauer at pengutronix.de>

The fsl_ssi driver uses the .set_sysclk callback to configure the
bitclock for master mode. This is unnecessary since the bitclock
is known in hw_params. This patch removes the .set_sysclk callback
and configures the bitclock from .hw_params.

Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
 sound/soc/fsl/fsl_ssi.c | 18 +++++++++++++-----
 1 file changed, 13 insertions(+), 5 deletions(-)

diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index d8f9a5f..8ed724c 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -509,7 +509,7 @@ static int fsl_ssi_startup(struct snd_pcm_substream *substream,
 }
 
 /**
- * fsl_ssi_set_dai_sysclk - configure Digital Audio Interface bit clock
+ * fsl_ssi_set_bclk - configure Digital Audio Interface bit clock
  *
  * Note: This function can be only called when using SSI as DAI master
  *
@@ -517,8 +517,8 @@ static int fsl_ssi_startup(struct snd_pcm_substream *substream,
  * freq: Output BCLK frequency = samplerate * 32 (fixed) * channels
  * dir: SND_SOC_CLOCK_OUT -> TxBCLK, SND_SOC_CLOCK_IN -> RxBCLK.
  */
-static int fsl_ssi_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
-				  int clk_id, unsigned int freq, int dir)
+static int fsl_ssi_set_bclk(struct snd_pcm_substream *substream,
+		struct snd_soc_dai *cpu_dai, unsigned int freq)
 {
 	struct fsl_ssi_private *ssi_private = snd_soc_dai_get_drvdata(cpu_dai);
 	struct ccsr_ssi __iomem *ssi = ssi_private->ssi;
@@ -583,7 +583,7 @@ static int fsl_ssi_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
 	mask = CCSR_SSI_SxCCR_PM_MASK | CCSR_SSI_SxCCR_DIV2 |
 		CCSR_SSI_SxCCR_PSR;
 
-	if (dir == SND_SOC_CLOCK_OUT || synchronous)
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK || synchronous)
 		write_ssi_mask(&ssi->stccr, mask, stccr);
 	else
 		write_ssi_mask(&ssi->srccr, mask, stccr);
@@ -627,6 +627,7 @@ static int fsl_ssi_hw_params(struct snd_pcm_substream *substream,
 		snd_pcm_format_width(params_format(hw_params));
 	u32 wl = CCSR_SSI_SxCCR_WL(sample_size);
 	int enabled = read_ssi(&ssi->scr) & CCSR_SSI_SCR_SSIEN;
+	int ret;
 
 	/*
 	 * If we're in synchronous mode, and the SSI is already enabled,
@@ -635,6 +636,14 @@ static int fsl_ssi_hw_params(struct snd_pcm_substream *substream,
 	if (enabled && ssi_private->cpu_dai_drv.symmetric_rates)
 		return 0;
 
+	if (fsl_ssi_is_i2s_master(ssi_private)) {
+		ret = fsl_ssi_set_bclk(substream, cpu_dai,
+				params_channels(hw_params) * 32 *
+				params_rate(hw_params));
+		if (ret)
+			return ret;
+	}
+
 	/*
 	 * FIXME: The documentation says that SxCCR[WL] should not be
 	 * modified while the SSI is enabled.  The only time this can
@@ -923,7 +932,6 @@ static const struct snd_soc_dai_ops fsl_ssi_dai_ops = {
 	.startup	= fsl_ssi_startup,
 	.hw_params	= fsl_ssi_hw_params,
 	.set_fmt	= fsl_ssi_set_dai_fmt,
-	.set_sysclk	= fsl_ssi_set_dai_sysclk,
 	.set_tdm_slot	= fsl_ssi_set_dai_tdm_slot,
 	.trigger	= fsl_ssi_trigger,
 };
-- 
1.9.1



More information about the Alsa-devel mailing list