[alsa-devel] [PATCH 1/2] ASoC: tlv320aic3x: Convert mic bias to a supply widget
broonie at opensource.wolfsonmicro.com
Thu Jan 31 03:32:25 CET 2013
On Wed, Jan 30, 2013 at 06:52:35PM +0530, Hebbar Gururaja wrote:
> Convert MicBias widgets to supply widget.
> On tlv320aic3x, Mic bias power on/off shares the same register bits
> with output mic bias voltage. So, when power on mic bias, we need
> reclaim it to voltage value.
This should update machine drivers that use the CODEC too.
> +- ai3x-micbias-vg - MicBias Voltage required.
> + 1 - MICBIAS output is powered to 2.0V,
> + 2 - MICBIAS output is powered to 2.5V,
> + 3 - MICBIAS output is connected to AVDD,
> + If this node is not mentioned or if the value is incorrect, then MicBias
> + is powered down.
Would 2.0V not be a more sensible default (it is the lowest voltage so
is unlikely to cause hardware damage if it's wrong)?
Otherwise this looks good.
-------------- next part --------------
A non-text attachment was scrubbed...
Size: 836 bytes
Desc: Digital signature
More information about the Alsa-devel