[alsa-devel] [pulseaudio-discuss] Issue with multiple hdmi codecs in radeonhd, hacked to work

John Ettedgui john.ettedgui at gmail.com
Mon Dec 9 10:15:50 CET 2013


On Sun, Dec 8, 2013 at 10:08 PM, Anssi Hannula <anssi.hannula at iki.fi> wrote:

>
> > ATI/AMD does not internally use ELD but analogous custom stuff. But as
> > noted, the HDA driver on this kernel does not support reading it, it is
> > a 3.12+ feature (though note that writing the info is disabled in 3.12
> > radeon video driver on some cards).
>
> A typo here, AMD stuff is a 3.13+ feature.
>
> New logs.
I hope this time I got it right:


zcat /proc/config.gz :
CONFIG_SND_DEBUG=y
CONFIG_SND_DEBUG_VERBOSE=y
CONFIG_SND_PCM_XRUN_DEBUG=y
CONFIG_SND_DYNAMIC_MINORS=y

Sorry about the previous ones.

Thanks,
John
-------------- next part --------------
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.13.0-1-mainline (root at HTPC) (gcc version 4.8.2 (GCC) ) #1 SMP PREEMPT Sun Dec 8 23:43:48 PST 2013
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux-mainline root=LABEL=ROOT rw rootfstype=btrfs raid=noautodetect intel_iommu=on radeon.audio=1 radeon.dpm=1 quiet add_efi_memmap clocksource=hpet hpet=enable splash
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000df7dffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000df7e0000-0x00000000df7e1fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000df7e2000-0x00000000df7effff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000df7f0000-0x00000000df7fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f4000000-0x00000000f7ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. P55-UD3R/P55-UD3R, BIOS F8 06/23/2010
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x420000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-through
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F00000000 write-back
[    0.000000]   1 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   2 base 100000000 mask F00000000 write-back
[    0.000000]   3 base 200000000 mask E00000000 write-back
[    0.000000]   4 base 300000000 mask F00000000 write-back
[    0.000000]   5 base 400000000 mask FE0000000 write-back
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xdf7e0 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f57d0-0x000f57df] mapped at [ffff8800000f57d0]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01b3c000, 0x01b3cfff] PGTABLE
[    0.000000] BRK [0x01b3d000, 0x01b3dfff] PGTABLE
[    0.000000] BRK [0x01b3e000, 0x01b3efff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x41fe00000-0x41fffffff]
[    0.000000]  [mem 0x41fe00000-0x41fffffff] page 2M
[    0.000000] BRK [0x01b3f000, 0x01b3ffff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x41c000000-0x41fdfffff]
[    0.000000]  [mem 0x41c000000-0x41fdfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x400000000-0x41bffffff]
[    0.000000]  [mem 0x400000000-0x41bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0xdf7dffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0xdf5fffff] page 2M
[    0.000000]  [mem 0xdf600000-0xdf7dffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[    0.000000]  [mem 0x100000000-0x3ffffffff] page 2M
[    0.000000] BRK [0x01b40000, 0x01b40fff] PGTABLE
[    0.000000] BRK [0x01b41000, 0x01b41fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x37500000-0x37a77fff]
[    0.000000] ACPI: RSDP 00000000000f7190 000014 (v00 GBT   )
[    0.000000] ACPI: RSDT 00000000df7e2040 000040 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: FACP 00000000df7e20c0 000074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: DSDT 00000000df7e2180 006278 (v01 GBT    GBTUACPI 00001000 MSFT 0100000C)
[    0.000000] ACPI: FACS 00000000df7e0000 000040
[    0.000000] ACPI: HPET 00000000df7e8540 000038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
[    0.000000] ACPI: MCFG 00000000df7e85c0 00003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: EUDS 00000000df7e8600 000560 (v01 GBT             00000000      00000000)
[    0.000000] ACPI: TAMG 00000000df7e8b60 000A32 (v01 GBT    GBT   B0 5455312E BG?? 53450101)
[    0.000000] ACPI: APIC 00000000df7e8440 0000BC (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: SSDT 00000000df7e95c0 001778 (v01  INTEL PPM RCM  80000001 INTL 20061109)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000041fffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x41fffffff]
[    0.000000]   NODE_DATA [mem 0x41ffed000-0x41fff1fff]
[    0.000000]  [ffffea0000000000-ffffea00107fffff] PMD -> [ffff88040f600000-ffff88041f5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x41fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009cfff]
[    0.000000]   node   0: [mem 0x00100000-0xdf7dffff]
[    0.000000]   node   0: [mem 0x100000000-0x41fffffff]
[    0.000000] On node 0 totalpages: 4192124
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14240 pages used for memmap
[    0.000000]   DMA32 zone: 911328 pages, LIFO batch:31
[    0.000000]   Normal zone: 51200 pages used for memmap
[    0.000000]   Normal zone: 3276800 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf7e0000-0xdf7e1fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf7e2000-0xdf7effff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf7f0000-0xdf7fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf800000-0xf3ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
[    0.000000] e820: [mem 0xdf800000-0xf3ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff88041fc00000 s86272 r8192 d24320 u262144
[    0.000000] pcpu-alloc: s86272 r8192 d24320 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 4126599
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-mainline root=LABEL=ROOT rw rootfstype=btrfs raid=noautodetect intel_iommu=on radeon.audio=1 radeon.dpm=1 quiet add_efi_memmap clocksource=hpet hpet=enable splash
[    0.000000] Intel-IOMMU: enabled
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 16421832K/16768496K available (5151K kernel code, 815K rwdata, 1728K rodata, 1160K init, 1304K bss, 346664K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[    0.000000] NR_IRQS:8448 nr_irqs:744 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 67108864 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.003333] tsc: Detected 2719.921 MHz processor
[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5442.50 BogoMIPS (lpj=9066403)
[    0.000004] pid_max: default: 32768 minimum: 301
[    0.000028] Security Framework initialized
[    0.000035] AppArmor: AppArmor disabled by boot time parameter
[    0.000036] Yama: becoming mindful.
[    0.001003] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.003917] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.005457] Mount-cache hash table entries: 256
[    0.005619] Initializing cgroup subsys memory
[    0.005624] Initializing cgroup subsys devices
[    0.005626] Initializing cgroup subsys freezer
[    0.005627] Initializing cgroup subsys net_cls
[    0.005629] Initializing cgroup subsys blkio
[    0.005645] CPU: Physical Processor ID: 0
[    0.005646] CPU: Processor Core ID: 0
[    0.005650] mce: CPU supports 9 MCE banks
[    0.005658] CPU0: Thermal monitoring enabled (TM1)
[    0.005666] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 6
[    0.005731] Freeing SMP alternatives memory: 20K (ffffffff819ef000 - ffffffff819f4000)
[    0.006626] ACPI: Core revision 20131115
[    0.008773] ACPI: All ACPI Tables successfully acquired
[    0.011212] ftrace: allocating 20458 entries in 80 pages
[    0.020368] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.053329] smpboot: CPU0: Intel(R) Core(TM) i5 CPU         750  @ 2.67GHz (fam: 06, model: 1e, stepping: 05)
[    0.157891] Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
[    0.157896] perf_event_intel: CPU erratum AAJ80 worked around
[    0.157897] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[    0.157899] ... version:                3
[    0.157900] ... bit width:              48
[    0.157900] ... generic registers:      4
[    0.157901] ... value mask:             0000ffffffffffff
[    0.157902] ... max period:             000000007fffffff
[    0.157903] ... fixed-purpose events:   3
[    0.157904] ... event mask:             000000070000000f
[    0.184594] x86: Booting SMP configuration:
[    0.197893] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.184596] .... node  #0, CPUs:      #1 #2 #3
[    0.237788] x86: Booted up 1 node, 4 CPUs
[    0.237791] smpboot: Total of 4 processors activated (21768.00 BogoMIPS)
[    0.240249] devtmpfs: initialized
[    0.243925] PM: Registering ACPI NVS region [mem 0xdf7e0000-0xdf7e1fff] (8192 bytes)
[    0.244730] RTC time:  9:06:49, date: 12/09/13
[    0.244762] NET: Registered protocol family 16
[    0.244861] cpuidle: using governor ladder
[    0.244863] cpuidle: using governor menu
[    0.244889] ACPI: bus type PCI registered
[    0.244891] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.244945] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
[    0.244947] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
[    0.248211] PCI: Using configuration type 1 for base access
[    0.248841] bio: create slab <bio-0> at 0
[    0.248927] ACPI: Added _OSI(Module Device)
[    0.248928] ACPI: Added _OSI(Processor Device)
[    0.248929] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.248930] ACPI: Added _OSI(Processor Aggregator Device)
[    0.252160] ACPI BIOS Warning (bug): Incorrect checksum in table [TAMG] - 0xE1, should be 0xE0 (20131115/tbprint-214)
[    0.252633] ACPI: Interpreter enabled
[    0.252638] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[    0.252641] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[    0.252651] ACPI: (supports S0 S3 S4 S5)
[    0.252653] ACPI: Using IOAPIC for interrupt routing
[    0.252668] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.252762] ACPI: No dock devices found.
[    0.257128] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[    0.257133] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.257139] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.257333] ACPI: \_SB_.PCI0.LNKA: can't evaluate _ADR (0x5)
[    0.257335] ACPI: \_SB_.PCI0.LNKB: can't evaluate _ADR (0x5)
[    0.257337] ACPI: \_SB_.PCI0.LNKC: can't evaluate _ADR (0x5)
[    0.257339] ACPI: \_SB_.PCI0.LNKD: can't evaluate _ADR (0x5)
[    0.257340] ACPI: \_SB_.PCI0.LNKE: can't evaluate _ADR (0x5)
[    0.257342] ACPI: \_SB_.PCI0.LNKF: can't evaluate _ADR (0x5)
[    0.257343] ACPI: \_SB_.PCI0.LNK0: can't evaluate _ADR (0x5)
[    0.257345] ACPI: \_SB_.PCI0.LNK1: can't evaluate _ADR (0x5)
[    0.257347] ACPI: \_SB_.PCI0.EXPL: can't evaluate _ADR (0x5)
[    0.257348] PCI host bridge to bus 0000:00
[    0.257350] pci_bus 0000:00: root bus resource [bus 00-3f]
[    0.257352] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.257353] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.257355] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.257356] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[    0.257358] pci_bus 0000:00: root bus resource [mem 0xdf800000-0xfebfffff]
[    0.257366] pci 0000:00:00.0: [8086:d131] type 00 class 0x060000
[    0.257454] pci 0000:00:03.0: [8086:d138] type 01 class 0x060400
[    0.257495] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[    0.257558] pci 0000:00:08.0: [8086:d155] type 00 class 0x088000
[    0.257641] pci 0000:00:08.1: [8086:d156] type 00 class 0x088000
[    0.257723] pci 0000:00:08.2: [8086:d157] type 00 class 0x088000
[    0.257807] pci 0000:00:08.3: [8086:d158] type 00 class 0x088000
[    0.257884] pci 0000:00:10.0: [8086:d150] type 00 class 0x088000
[    0.257955] pci 0000:00:10.1: [8086:d151] type 00 class 0x088000
[    0.258041] pci 0000:00:1a.0: [8086:3b3b] type 00 class 0x0c0300
[    0.258079] pci 0000:00:1a.0: reg 0x20: [io  0xff00-0xff1f]
[    0.258147] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.258177] pci 0000:00:1a.1: [8086:3b3e] type 00 class 0x0c0300
[    0.258215] pci 0000:00:1a.1: reg 0x20: [io  0xfe00-0xfe1f]
[    0.258282] pci 0000:00:1a.1: System wakeup disabled by ACPI
[    0.258311] pci 0000:00:1a.2: [8086:3b3f] type 00 class 0x0c0300
[    0.258348] pci 0000:00:1a.2: reg 0x20: [io  0xfd00-0xfd1f]
[    0.258415] pci 0000:00:1a.2: System wakeup disabled by ACPI
[    0.258452] pci 0000:00:1a.7: [8086:3b3c] type 00 class 0x0c0320
[    0.258470] pci 0000:00:1a.7: reg 0x10: [mem 0xfbfff000-0xfbfff3ff]
[    0.258551] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.258592] pci 0000:00:1a.7: System wakeup disabled by ACPI
[    0.258622] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[    0.258682] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.258725] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.258755] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[    0.258815] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.258857] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.258887] pci 0000:00:1c.3: [8086:3b48] type 01 class 0x060400
[    0.258947] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.258990] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.259022] pci 0000:00:1d.0: [8086:3b36] type 00 class 0x0c0300
[    0.259059] pci 0000:00:1d.0: reg 0x20: [io  0xfc00-0xfc1f]
[    0.259127] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.259157] pci 0000:00:1d.1: [8086:3b37] type 00 class 0x0c0300
[    0.259195] pci 0000:00:1d.1: reg 0x20: [io  0xfb00-0xfb1f]
[    0.259262] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    0.259292] pci 0000:00:1d.2: [8086:3b38] type 00 class 0x0c0300
[    0.259330] pci 0000:00:1d.2: reg 0x20: [io  0xfa00-0xfa1f]
[    0.259397] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    0.259425] pci 0000:00:1d.3: [8086:3b39] type 00 class 0x0c0300
[    0.259462] pci 0000:00:1d.3: reg 0x20: [io  0xf900-0xf91f]
[    0.259529] pci 0000:00:1d.3: System wakeup disabled by ACPI
[    0.259564] pci 0000:00:1d.7: [8086:3b34] type 00 class 0x0c0320
[    0.259583] pci 0000:00:1d.7: reg 0x10: [mem 0xfbffe000-0xfbffe3ff]
[    0.259663] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.259705] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    0.259732] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.259808] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.259839] pci 0000:00:1f.0: [8086:3b02] type 00 class 0x060100
[    0.259995] pci 0000:00:1f.2: [8086:3b22] type 00 class 0x010601
[    0.260011] pci 0000:00:1f.2: reg 0x10: [io  0xf800-0xf807]
[    0.260018] pci 0000:00:1f.2: reg 0x14: [io  0xf700-0xf703]
[    0.260025] pci 0000:00:1f.2: reg 0x18: [io  0xf600-0xf607]
[    0.260032] pci 0000:00:1f.2: reg 0x1c: [io  0xf500-0xf503]
[    0.260039] pci 0000:00:1f.2: reg 0x20: [io  0xf400-0xf41f]
[    0.260046] pci 0000:00:1f.2: reg 0x24: [mem 0xfbffd000-0xfbffd7ff]
[    0.260086] pci 0000:00:1f.2: PME# supported from D3hot
[    0.260149] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[    0.260162] pci 0000:00:1f.3: reg 0x10: [mem 0xfbffc000-0xfbffc0ff 64bit]
[    0.260181] pci 0000:00:1f.3: reg 0x20: [io  0x0500-0x051f]
[    0.260286] pci 0000:01:00.0: [1002:6818] type 00 class 0x030000
[    0.260297] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.260306] pci 0000:01:00.0: reg 0x18: [mem 0xfbc80000-0xfbcbffff 64bit]
[    0.260312] pci 0000:01:00.0: reg 0x20: [io  0xce00-0xceff]
[    0.260323] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    0.260356] pci 0000:01:00.0: supports D1 D2
[    0.260357] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
[    0.260403] pci 0000:01:00.1: [1002:aab0] type 00 class 0x040300
[    0.260414] pci 0000:01:00.1: reg 0x10: [mem 0xfbcfc000-0xfbcfffff 64bit]
[    0.260468] pci 0000:01:00.1: supports D1 D2
[    0.264462] pci 0000:00:03.0: PCI bridge to [bus 01]
[    0.264465] pci 0000:00:03.0:   bridge window [io  0xc000-0xcfff]
[    0.264468] pci 0000:00:03.0:   bridge window [mem 0xfbc00000-0xfbcfffff]
[    0.264471] pci 0000:00:03.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.264549] pci 0000:02:00.0: [197b:2363] type 00 class 0x010185
[    0.264632] pci 0000:02:00.0: reg 0x24: [mem 0xfbafe000-0xfbafffff]
[    0.264692] pci 0000:02:00.0: PME# supported from D3hot
[    0.264747] pci 0000:02:00.1: [197b:2363] type 00 class 0x010185
[    0.264767] pci 0000:02:00.1: reg 0x10: [io  0xbf00-0xbf07]
[    0.264776] pci 0000:02:00.1: reg 0x14: [io  0xbe00-0xbe03]
[    0.264786] pci 0000:02:00.1: reg 0x18: [io  0xbd00-0xbd07]
[    0.264795] pci 0000:02:00.1: reg 0x1c: [io  0xbc00-0xbc03]
[    0.264805] pci 0000:02:00.1: reg 0x20: [io  0xbb00-0xbb0f]
[    0.264898] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.264907] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.264910] pci 0000:00:1c.0:   bridge window [io  0xb000-0xbfff]
[    0.264913] pci 0000:00:1c.0:   bridge window [mem 0xfba00000-0xfbafffff]
[    0.264976] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    0.264992] pci 0000:03:00.0: reg 0x10: [io  0xee00-0xeeff]
[    0.265018] pci 0000:03:00.0: reg 0x18: [mem 0xfbeff000-0xfbefffff 64bit pref]
[    0.265035] pci 0000:03:00.0: reg 0x20: [mem 0xfbef8000-0xfbefbfff 64bit pref]
[    0.265046] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    0.265107] pci 0000:03:00.0: supports D1 D2
[    0.265108] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.271125] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.271131] pci 0000:00:1c.1:   bridge window [io  0xe000-0xefff]
[    0.271136] pci 0000:00:1c.1:   bridge window [mem 0xfb900000-0xfb9fffff]
[    0.271143] pci 0000:00:1c.1:   bridge window [mem 0xfbe00000-0xfbefffff 64bit pref]
[    0.271229] pci 0000:04:00.0: [197b:2363] type 00 class 0x010185
[    0.271312] pci 0000:04:00.0: reg 0x24: [mem 0xfbdfe000-0xfbdfffff]
[    0.271371] pci 0000:04:00.0: PME# supported from D3hot
[    0.271428] pci 0000:04:00.1: [197b:2363] type 00 class 0x010185
[    0.271447] pci 0000:04:00.1: reg 0x10: [io  0xdf00-0xdf07]
[    0.271457] pci 0000:04:00.1: reg 0x14: [io  0xde00-0xde03]
[    0.271467] pci 0000:04:00.1: reg 0x18: [io  0xdd00-0xdd07]
[    0.271476] pci 0000:04:00.1: reg 0x1c: [io  0xdc00-0xdc03]
[    0.271486] pci 0000:04:00.1: reg 0x20: [io  0xdb00-0xdb0f]
[    0.271579] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.271587] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.271591] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[    0.271594] pci 0000:00:1c.3:   bridge window [mem 0xfbd00000-0xfbdfffff]
[    0.271639] pci 0000:05:05.0: [168c:0023] type 00 class 0x028000
[    0.271657] pci 0000:05:05.0: reg 0x10: [mem 0xfbbf0000-0xfbbfffff]
[    0.271789] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[    0.271794] pci 0000:00:1e.0:   bridge window [mem 0xfbb00000-0xfbbfffff]
[    0.271798] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.271800] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.271802] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.271803] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[    0.271805] pci 0000:00:1e.0:   bridge window [mem 0xdf800000-0xfebfffff] (subtractive decode)
[    0.272269] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[    0.272314] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
[    0.272358] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[    0.272402] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.272445] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.272490] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[    0.272533] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.272577] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[    0.272649] ACPI: \_SB_.PCI0: notify handler is installed
[    0.272681] Found 1 acpi root devices
[    0.272740] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.272742] vgaarb: loaded
[    0.272743] vgaarb: bridge control possible 0000:01:00.0
[    0.272769] PCI: Using ACPI for IRQ routing
[    0.274030] PCI: Discovered peer bus 3f
[    0.274031] PCI: root bus 3f: using default resources
[    0.274032] PCI: Probing PCI hardware (bus 3f)
[    0.274051] PCI host bridge to bus 0000:3f
[    0.274053] pci_bus 0000:3f: root bus resource [io  0x0000-0xffff]
[    0.274054] pci_bus 0000:3f: root bus resource [mem 0x00000000-0xfffffffff]
[    0.274056] pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff]
[    0.274058] pci_bus 0000:3f: busn_res: can not insert [bus 3f-ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-3f])
[    0.274062] pci 0000:3f:00.0: [8086:2c51] type 00 class 0x060000
[    0.274096] pci 0000:3f:00.1: [8086:2c81] type 00 class 0x060000
[    0.274130] pci 0000:3f:02.0: [8086:2c90] type 00 class 0x060000
[    0.274163] pci 0000:3f:02.1: [8086:2c91] type 00 class 0x060000
[    0.274195] pci 0000:3f:03.0: [8086:2c98] type 00 class 0x060000
[    0.274226] pci 0000:3f:03.1: [8086:2c99] type 00 class 0x060000
[    0.274258] pci 0000:3f:03.4: [8086:2c9c] type 00 class 0x060000
[    0.274288] pci 0000:3f:04.0: [8086:2ca0] type 00 class 0x060000
[    0.274318] pci 0000:3f:04.1: [8086:2ca1] type 00 class 0x060000
[    0.274351] pci 0000:3f:04.2: [8086:2ca2] type 00 class 0x060000
[    0.274381] pci 0000:3f:04.3: [8086:2ca3] type 00 class 0x060000
[    0.274413] pci 0000:3f:05.0: [8086:2ca8] type 00 class 0x060000
[    0.274447] pci 0000:3f:05.1: [8086:2ca9] type 00 class 0x060000
[    0.274477] pci 0000:3f:05.2: [8086:2caa] type 00 class 0x060000
[    0.274509] pci 0000:3f:05.3: [8086:2cab] type 00 class 0x060000
[    0.274549] pci_bus 0000:3f: busn_res: [bus 3f-ff] end is updated to 3f
[    0.274553] PCI: pci_cache_line_size set to 64 bytes
[    0.274628] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
[    0.274630] e820: reserve RAM buffer [mem 0xdf7e0000-0xdfffffff]
[    0.274698] NetLabel: Initializing
[    0.274699] NetLabel:  domain hash size = 128
[    0.274700] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.274711] NetLabel:  unlabeled traffic allowed by default
[    0.274758] HPET: 8 timers in total, 5 timers will be used for per-cpu timer
[    0.274764] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 40, 41, 42, 43, 44, 0
[    0.274768] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.276800] hpet: hpet2 irq 40 for MSI
[    0.276836] hpet: hpet3 irq 41 for MSI
[    0.276875] hpet: hpet4 irq 42 for MSI
[    0.276914] hpet: hpet5 irq 43 for MSI
[    0.276936] Switched to clocksource hpet
[    0.280475] pnp: PnP ACPI init
[    0.280487] ACPI: bus type PNP registered
[    0.280616] system 00:00: [io  0x04d0-0x04d1] has been reserved
[    0.280618] system 00:00: [io  0x0290-0x029f] has been reserved
[    0.280620] system 00:00: [io  0x0800-0x087f] has been reserved
[    0.280622] system 00:00: [io  0x0290-0x0294] has been reserved
[    0.280623] system 00:00: [io  0x0880-0x088f] has been reserved
[    0.280626] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.280635] pnp 00:01: [dma 4]
[    0.280652] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.280706] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.280740] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.280759] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.280782] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.280992] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.281156] pnp 00:07: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.281264] system 00:08: [io  0x0400-0x047f] could not be reserved
[    0.281267] system 00:08: [io  0x0580-0x05ff] has been reserved
[    0.281269] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.281425] system 00:09: [mem 0xf4000000-0xf7ffffff] has been reserved
[    0.281428] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.281563] system 00:0a: [mem 0x000f0000-0x000f3fff] could not be reserved
[    0.281565] system 00:0a: [mem 0x000f4000-0x000f7fff] could not be reserved
[    0.281567] system 00:0a: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.281569] system 00:0a: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.281571] system 00:0a: [mem 0xdf7e0000-0xdf7effff] could not be reserved
[    0.281572] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.281574] system 00:0a: [mem 0x00100000-0xdf7dffff] could not be reserved
[    0.281576] system 00:0a: [mem 0xdf7f0000-0xdf7fffff] has been reserved
[    0.281578] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.281580] system 00:0a: [mem 0xfed10000-0xfed1dfff] has been reserved
[    0.281581] system 00:0a: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.281583] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.281585] system 00:0a: [mem 0xffb00000-0xffb7ffff] has been reserved
[    0.281586] system 00:0a: [mem 0xfff00000-0xffffffff] has been reserved
[    0.281588] system 00:0a: [mem 0x000e0000-0x000effff] has been reserved
[    0.281591] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.281620] pnp 00:0b: Plug and Play ACPI device, IDs INT0800 (active)
[    0.281624] pnp: PnP ACPI: found 12 devices
[    0.281625] ACPI: bus type PNP unregistered
[    0.287948] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[    0.287961] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
[    0.287972] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.287974] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.287978] pci 0000:00:1c.0: BAR 15: assigned [mem 0xdf800000-0xdf9fffff 64bit pref]
[    0.287980] pci 0000:00:1c.3: BAR 15: assigned [mem 0xdfa00000-0xdfbfffff 64bit pref]
[    0.287983] pci 0000:01:00.0: BAR 6: assigned [mem 0xfbc00000-0xfbc1ffff pref]
[    0.287985] pci 0000:00:03.0: PCI bridge to [bus 01]
[    0.287987] pci 0000:00:03.0:   bridge window [io  0xc000-0xcfff]
[    0.287990] pci 0000:00:03.0:   bridge window [mem 0xfbc00000-0xfbcfffff]
[    0.287993] pci 0000:00:03.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.287997] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.287999] pci 0000:00:1c.0:   bridge window [io  0xb000-0xbfff]
[    0.288003] pci 0000:00:1c.0:   bridge window [mem 0xfba00000-0xfbafffff]
[    0.288006] pci 0000:00:1c.0:   bridge window [mem 0xdf800000-0xdf9fffff 64bit pref]
[    0.288011] pci 0000:03:00.0: BAR 6: assigned [mem 0xfbe00000-0xfbe1ffff pref]
[    0.288013] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.288015] pci 0000:00:1c.1:   bridge window [io  0xe000-0xefff]
[    0.288019] pci 0000:00:1c.1:   bridge window [mem 0xfb900000-0xfb9fffff]
[    0.288022] pci 0000:00:1c.1:   bridge window [mem 0xfbe00000-0xfbefffff 64bit pref]
[    0.288027] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.288029] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[    0.288033] pci 0000:00:1c.3:   bridge window [mem 0xfbd00000-0xfbdfffff]
[    0.288036] pci 0000:00:1c.3:   bridge window [mem 0xdfa00000-0xdfbfffff 64bit pref]
[    0.288040] pci 0000:00:1e.0: PCI bridge to [bus 05]
[    0.288044] pci 0000:00:1e.0:   bridge window [mem 0xfbb00000-0xfbbfffff]
[    0.288051] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.288053] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.288054] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.288056] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[    0.288057] pci_bus 0000:00: resource 8 [mem 0xdf800000-0xfebfffff]
[    0.288059] pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
[    0.288060] pci_bus 0000:01: resource 1 [mem 0xfbc00000-0xfbcfffff]
[    0.288062] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[    0.288064] pci_bus 0000:02: resource 0 [io  0xb000-0xbfff]
[    0.288065] pci_bus 0000:02: resource 1 [mem 0xfba00000-0xfbafffff]
[    0.288067] pci_bus 0000:02: resource 2 [mem 0xdf800000-0xdf9fffff 64bit pref]
[    0.288068] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.288070] pci_bus 0000:03: resource 1 [mem 0xfb900000-0xfb9fffff]
[    0.288071] pci_bus 0000:03: resource 2 [mem 0xfbe00000-0xfbefffff 64bit pref]
[    0.288073] pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
[    0.288074] pci_bus 0000:04: resource 1 [mem 0xfbd00000-0xfbdfffff]
[    0.288076] pci_bus 0000:04: resource 2 [mem 0xdfa00000-0xdfbfffff 64bit pref]
[    0.288078] pci_bus 0000:05: resource 1 [mem 0xfbb00000-0xfbbfffff]
[    0.288079] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
[    0.288081] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
[    0.288082] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[    0.288084] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff]
[    0.288085] pci_bus 0000:05: resource 8 [mem 0xdf800000-0xfebfffff]
[    0.288088] pci_bus 0000:3f: resource 4 [io  0x0000-0xffff]
[    0.288089] pci_bus 0000:3f: resource 5 [mem 0x00000000-0xfffffffff]
[    0.288113] NET: Registered protocol family 2
[    0.288272] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.288622] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.288895] TCP: Hash tables configured (established 131072 bind 65536)
[    0.288914] TCP: reno registered
[    0.288931] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.289043] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.289190] NET: Registered protocol family 1
[    0.313671] pci 0000:01:00.0: Boot video device
[    0.313703] PCI: CLS 64 bytes, default 64
[    0.313739] Unpacking initramfs...
[    0.333899] Freeing initrd memory: 5600K (ffff880037500000 - ffff880037a78000)
[    0.333902] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.333905] software IO TLB [mem 0xdb7e0000-0xdf7e0000] (64MB) mapped at [ffff8800db7e0000-ffff8800df7dffff]
[    0.334066] Scanning for low memory corruption every 60 seconds
[    0.334313] audit: initializing netlink socket (disabled)
[    0.334322] type=2000 audit(1386580009.229:1): initialized
[    0.344934] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.346221] zbud: loaded
[    0.346368] VFS: Disk quotas dquot_6.5.2
[    0.346402] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.346536] msgmni has been set to 32084
[    0.346796] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.346835] io scheduler noop registered
[    0.346836] io scheduler deadline registered
[    0.346865] io scheduler cfq registered (default)
[    0.347349] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.347360] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.347396] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[    0.347397] vesafb: scrolling: redraw
[    0.347398] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    0.347823] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005b00000, using 8128k, total 8128k
[    0.578242] Console: switching to colour frame buffer device 240x67
[    0.807747] fb0: VESA VGA frame buffer device
[    0.807757] intel_idle: MWAIT substates: 0x1120
[    0.807762] intel_idle: v0.4 model 0x1E
[    0.807763] intel_idle: lapic_timer_reliable_states 0x2
[    0.807863] GHES: HEST is not enabled!
[    0.807910] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.828427] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.828857] Linux agpgart interface v0.103
[    0.828916] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.863321] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
[    0.863322] i8042: If AUX port is really absent please use the 'i8042.noaux' option
[    1.112648] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.112911] mousedev: PS/2 mouse device common for all mice
[    1.112970] rtc_cmos 00:03: RTC can wake from S4
[    1.113176] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.113202] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.113256] drop_monitor: Initializing network drop monitor service
[    1.113300] TCP: cubic registered
[    1.113373] NET: Registered protocol family 10
[    1.113502] NET: Registered protocol family 17
[    1.113510] Key type dns_resolver registered
[    1.113880] registered taskstats version 1
[    1.114672]   Magic number: 9:729:120
[    1.114788] rtc_cmos 00:03: setting system clock to 2013-12-09 09:06:50 UTC (1386580010)
[    1.114809] PM: Hibernation image not present or could not be loaded.
[    1.115666] Freeing unused kernel memory: 1160K (ffffffff818cd000 - ffffffff819ef000)
[    1.115667] Write protecting the kernel read-only data: 8192k
[    1.117953] Freeing unused kernel memory: 980K (ffff88000150b000 - ffff880001600000)
[    1.118752] Freeing unused kernel memory: 320K (ffff8800017b0000 - ffff880001800000)
[    1.126109] systemd-udevd[59]: starting version 208
[    1.182576] raid6: sse2x1    6636 MB/s
[    1.239076] raid6: sse2x2    7920 MB/s
[    1.295671] raid6: sse2x4    8813 MB/s
[    1.295672] raid6: using algorithm sse2x4 (8813 MB/s)
[    1.295673] raid6: using ssse3x2 recovery algorithm
[    1.295789] xor: measuring software checksum speed
[    1.329002]    prefetch64-sse: 11398.800 MB/sec
[    1.335673] tsc: Refined TSC clocksource calibration: 2719.999 MHz
[    1.362248]    generic_sse:  9919.200 MB/sec
[    1.362249] xor: using function: prefetch64-sse (11398.800 MB/sec)
[    1.365021] bio: create slab <bio-1> at 1
[    1.365970] Btrfs loaded
[    1.389228] ACPI: bus type USB registered
[    1.389249] usbcore: registered new interface driver usbfs
[    1.389257] usbcore: registered new interface driver hub
[    1.389342] usbcore: registered new device driver usb
[    1.389714] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.389908] uhci_hcd: USB Universal Host Controller Interface driver
[    1.390028] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    1.390033] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.390065] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00
[    1.390196] ehci-pci: EHCI PCI platform driver
[    1.390384] hub 1-0:1.0: USB hub found
[    1.390755] hub 1-0:1.0: 2 ports detected
[    1.391417] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    1.391422] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[    1.391451] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00
[    1.391620] SCSI subsystem initialized
[    1.391918] hub 2-0:1.0: USB hub found
[    1.391926] hub 2-0:1.0: 2 ports detected
[    1.392079] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    1.392084] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
[    1.392111] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000fd00
[    1.392233] hub 3-0:1.0: USB hub found
[    1.392240] hub 3-0:1.0: 2 ports detected
[    1.392390] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.392395] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[    1.392422] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00
[    1.392535] hub 4-0:1.0: USB hub found
[    1.392540] hub 4-0:1.0: 2 ports detected
[    1.392802] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.392807] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[    1.392837] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00
[    1.392949] hub 5-0:1.0: USB hub found
[    1.392955] hub 5-0:1.0: 2 ports detected
[    1.393054] libata version 3.00 loaded.
[    1.393188] pata_jmicron 0000:02:00.1: enabling device (0000 -> 0001)
[    1.394042] scsi0 : pata_jmicron
[    1.394215] scsi1 : pata_jmicron
[    1.394245] ata1: PATA max UDMA/100 cmd 0xbf00 ctl 0xbe00 bmdma 0xbb00 irq 17
[    1.394247] ata2: PATA max UDMA/100 cmd 0xbd00 ctl 0xbc00 bmdma 0xbb08 irq 17
[    1.394266] pata_jmicron 0000:04:00.1: enabling device (0000 -> 0001)
[    1.394918] scsi2 : pata_jmicron
[    1.395081] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.395088] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[    1.395109] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00
[    1.395131] scsi3 : pata_jmicron
[    1.395163] ata3: PATA max UDMA/100 cmd 0xdf00 ctl 0xde00 bmdma 0xdb00 irq 16
[    1.395164] ata4: PATA max UDMA/100 cmd 0xdd00 ctl 0xdc00 bmdma 0xdb08 irq 16
[    1.395266] hub 6-0:1.0: USB hub found
[    1.395271] hub 6-0:1.0: 2 ports detected
[    1.395419] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.395424] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 7
[    1.395444] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000f900
[    1.395583] hub 7-0:1.0: USB hub found
[    1.395589] hub 7-0:1.0: 2 ports detected
[    1.396330] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    1.396335] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 8
[    1.396346] ehci-pci 0000:00:1a.7: debug port 2
[    1.400251] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[    1.400255] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfbfff000
[    1.408930] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    1.409119] hub 8-0:1.0: USB hub found
[    1.409125] hub 8-0:1.0: 6 ports detected
[    1.432300] hub 1-0:1.0: USB hub found
[    1.432306] hub 1-0:1.0: 2 ports detected
[    1.455618] hub 2-0:1.0: USB hub found
[    1.455629] hub 2-0:1.0: 2 ports detected
[    1.478906] hub 3-0:1.0: USB hub found
[    1.478918] hub 3-0:1.0: 2 ports detected
[    1.479349] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    1.479356] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 9
[    1.479367] ehci-pci 0000:00:1d.7: debug port 2
[    1.483286] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    1.483290] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfbffe000
[    1.492182] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.492500] hub 9-0:1.0: USB hub found
[    1.492512] hub 9-0:1.0: 8 ports detected
[    1.515623] hub 4-0:1.0: USB hub found
[    1.515630] hub 4-0:1.0: 2 ports detected
[    1.538836] hub 5-0:1.0: USB hub found
[    1.538848] hub 5-0:1.0: 2 ports detected
[    1.562150] hub 6-0:1.0: USB hub found
[    1.562162] hub 6-0:1.0: 2 ports detected
[    1.585457] hub 7-0:1.0: USB hub found
[    1.585468] hub 7-0:1.0: 2 ports detected
[    1.585580] ahci 0000:00:1f.2: version 3.0
[    1.585684] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[    1.585725] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.598739] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[    1.598746] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems apst 
[    1.632557] scsi4 : ahci
[    1.632777] scsi5 : ahci
[    1.632936] scsi6 : ahci
[    1.633133] scsi7 : ahci
[    1.633247] scsi8 : ahci
[    1.633312] scsi9 : ahci
[    1.633370] ata5: SATA max UDMA/133 abar m2048 at 0xfbffd000 port 0xfbffd100 irq 45
[    1.633374] ata6: SATA max UDMA/133 abar m2048 at 0xfbffd000 port 0xfbffd180 irq 45
[    1.633376] ata7: SATA max UDMA/133 abar m2048 at 0xfbffd000 port 0xfbffd200 irq 45
[    1.633379] ata8: SATA max UDMA/133 abar m2048 at 0xfbffd000 port 0xfbffd280 irq 45
[    1.633382] ata9: SATA max UDMA/133 abar m2048 at 0xfbffd000 port 0xfbffd300 irq 45
[    1.633387] ata10: SATA max UDMA/133 abar m2048 at 0xfbffd000 port 0xfbffd380 irq 45
[    1.645352] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    1.645358] ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
[    1.645690] scsi10 : ahci
[    1.645924] scsi11 : ahci
[    1.646004] ata11: SATA max UDMA/133 abar m8192 at 0xfbafe000 port 0xfbafe100 irq 16
[    1.646008] ata12: SATA max UDMA/133 abar m8192 at 0xfbafe000 port 0xfbafe180 irq 16
[    1.658664] ahci 0000:04:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    1.658670] ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
[    1.658996] scsi12 : ahci
[    1.659212] scsi13 : ahci
[    1.659294] ata13: SATA max UDMA/133 abar m8192 at 0xfbdfe000 port 0xfbdfe100 irq 19
[    1.659299] ata14: SATA max UDMA/133 abar m8192 at 0xfbdfe000 port 0xfbdfe180 irq 19
[    1.964942] ata12: SATA link down (SStatus 0 SControl 300)
[    1.964982] ata11: SATA link down (SStatus 0 SControl 300)
[    1.984915] ata13: SATA link down (SStatus 0 SControl 300)
[    1.984954] ata14: SATA link down (SStatus 0 SControl 300)
[    2.101430] usb 1-1: new full-speed USB device number 2 using uhci_hcd
[    2.111412] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.112394] ata5.00: ATA-8: ST4000DM000-1F2168, CC52, max UDMA/133
[    2.112399] ata5.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    2.132880] ata5.00: configured for UDMA/133
[    2.133057] scsi 4:0:0:0: Direct-Access     ATA      ST4000DM000-1F21 CC52 PQ: 0 ANSI: 5
[    2.279090] hidraw: raw HID events driver (C) Jiri Kosina
[    2.281586] sd 4:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB)
[    2.281589] sd 4:0:0:0: [sda] 4096-byte physical blocks
[    2.281625] sd 4:0:0:0: [sda] Write Protect is off
[    2.281627] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.281642] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.285465] usbcore: registered new interface driver usbhid
[    2.285467] usbhid: USB HID core driver
[    2.285942] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1:1.0/input/input1
[    2.285979] hid-generic 0003:046D:C529.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.0-1/input0
[    2.286186] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1:1.1/input/input2
[    2.286319] hid-generic 0003:046D:C529.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1/input1
[    2.305665]  sda: unknown partition table
[    2.305831] sd 4:0:0:0: [sda] Attached SCSI disk
[    2.617441] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.618426] ata6.00: ATA-8: ST4000DM000-1F2168, CC52, max UDMA/133
[    2.618431] ata6.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    2.640438] ata6.00: configured for UDMA/133
[    2.640596] scsi 5:0:0:0: Direct-Access     ATA      ST4000DM000-1F21 CC52 PQ: 0 ANSI: 5
[    2.640793] sd 5:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB)
[    2.640796] sd 5:0:0:0: [sdb] 4096-byte physical blocks
[    2.640834] sd 5:0:0:0: [sdb] Write Protect is off
[    2.640836] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.640852] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.715663]  sdb: sdb1
[    2.716051] sd 5:0:0:0: [sdb] Attached SCSI disk
[    2.825388] random: lvm urandom read with 46 bits of entropy available
[    2.933717] usb 4-2: new full-speed USB device number 2 using uhci_hcd
[    2.960351] ata7: SATA link down (SStatus 0 SControl 300)
[    3.123029] logitech-djreceiver 0003:046D:C52B.0005: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-2/input2
[    3.124791] input: Logitech Unifying Device. Wireless PID:101a as /devices/pci0000:00/0000:00:1d.0/usb4/4-2/4-2:1.2/0003:046D:C52B.0005/input/input3
[    3.125096] logitech-djdevice 0003:046D:C52B.0006: input,hidraw3: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:101a] on usb-0000:00:1d.0-2:1
[    3.126899] input: Logitech Unifying Device. Wireless PID:2012 as /devices/pci0000:00/0000:00:1d.0/usb4/4-2/4-2:1.2/0003:046D:C52B.0005/input/input4
[    3.127132] logitech-djdevice 0003:046D:C52B.0007: input,hidraw4: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:2012] on usb-0000:00:1d.0-2:2
[    3.343211] usb 5-1: new low-speed USB device number 2 using uhci_hcd
[    3.446451] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.446800] ata8.00: ATA-8: INTEL SSDSA2CW080G3, 4PC10362, max UDMA/133
[    3.446805] ata8.00: 156301488 sectors, multi 1: LBA48 NCQ (depth 31/32)
[    3.447209] ata8.00: configured for UDMA/133
[    3.447307] scsi 7:0:0:0: Direct-Access     ATA      INTEL SSDSA2CW08 4PC1 PQ: 0 ANSI: 5
[    3.447410] sd 7:0:0:0: [sdc] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    3.447500] sd 7:0:0:0: [sdc] Write Protect is off
[    3.447503] sd 7:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    3.447521] sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.449953]  sdc: sdc1 sdc2 sdc3 sdc4
[    3.450665] sd 7:0:0:0: [sdc] Attached SCSI disk
[    3.478790] btrfs: device label ROOT devid 1 transid 24773 /dev/sdc3
[    3.479421] btrfs: device label HOME devid 1 transid 28896 /dev/sdc4
[    3.766005] ata9: SATA link down (SStatus 0 SControl 300)
[    4.252066] ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    4.252850] ata10.00: ATA-8: ST33000651AS, CC43, max UDMA/133
[    4.252855] ata10.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    4.253742] ata10.00: configured for UDMA/133
[    4.253839] scsi 9:0:0:0: Direct-Access     ATA      ST33000651AS     CC43 PQ: 0 ANSI: 5
[    4.253940] sd 9:0:0:0: [sdd] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
[    4.253976] sd 9:0:0:0: [sdd] Write Protect is off
[    4.253978] sd 9:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[    4.253994] sd 9:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.300219]  sdd: sdd1
[    4.300607] sd 9:0:0:0: [sdd] Attached SCSI disk
[    4.414481] device-mapper: uevent: version 1.0.3
[    4.414534] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel at redhat.com
[    4.416835] btrfs: device label ROOT devid 1 transid 24773 /dev/sdc3
[    4.417377] btrfs: disk space caching is enabled
[    4.417379] btrfs: has skinny extents
[    4.418551] bio: create slab <bio-2> at 2
[    4.443584] Btrfs detected SSD devices, enabling SSD mode
[    4.444994] random: nonblocking pool is initialized
[    4.582441] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[    4.583247] systemd[1]: Set hostname to <HTPC>.
[    4.647498] systemd[1]: [/usr/lib/systemd/system/pacserve-ports.service:15] Unknown lvalue 'ExecRestart' in section 'Service'
[    4.647779] systemd[1]: [/usr/lib/systemd/system/lcdd.service:8] Unknown lvalue 'ControlGroup' in section 'Service'
[    4.648851] systemd[1]: Cannot add dependency job for unit nmbd.service, ignoring: Unit nmbd.service failed to load: No such file or directory.
[    4.648857] systemd[1]: Cannot add dependency job for unit smbd.service, ignoring: Unit smbd.service failed to load: No such file or directory.
[    4.648880] systemd[1]: Cannot add dependency job for unit arch-daemons.target, ignoring: Unit arch-daemons.target failed to load: No such file or directory.
[    4.648895] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[    4.648903] systemd[1]: Cannot add dependency job for unit console-kit-daemon.service, ignoring: Unit console-kit-daemon.service failed to load: No such file or directory.
[    4.650294] systemd[1]: Starting Replay Read-Ahead Data...
[    4.650669] systemd[1]: Starting Collect Read-Ahead Data...
[    4.651038] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    4.651078] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    4.651097] systemd[1]: Starting Remote File Systems.
[    4.651106] systemd[1]: Reached target Remote File Systems.
[    4.651116] systemd[1]: Starting Delayed Shutdown Socket.
[    4.651138] systemd[1]: Listening on Delayed Shutdown Socket.
[    4.651150] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    4.651168] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    4.651176] systemd[1]: Starting Device-mapper event daemon FIFOs.
[    4.651197] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    4.651204] systemd[1]: Starting LVM2 metadata daemon socket.
[    4.651222] systemd[1]: Listening on LVM2 metadata daemon socket.
[    4.651237] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    4.651262] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    4.651270] systemd[1]: Starting Encrypted Volumes.
[    4.651278] systemd[1]: Reached target Encrypted Volumes.
[    4.651303] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    4.651371] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    4.651385] systemd[1]: Starting Journal Socket.
[    4.651423] systemd[1]: Listening on Journal Socket.
[    4.651444] systemd[1]: Starting Store Sound Card State...
[    4.651689] systemd[1]: Mounting Debug File System...
[    4.656158] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    4.656369] systemd[1]: Mounting POSIX Message Queue File System...
[    4.656591] systemd[1]: Mounting Huge Pages File System...
[    4.656871] systemd[1]: Starting Journal Service...
[    4.657265] systemd[1]: Started Journal Service.
[    4.693981] systemd-journald[179]: Vacuuming done, freed 0 bytes
[    4.741734] systemd-udevd[209]: starting version 208
[    4.774073] it87: Found IT8720F chip at 0x290, revision 8
[    4.774081] it87: VID is disabled (pins used for GPIO)
[    4.774091] it87: Routing internal VCCH to in7
[    4.774094] it87: Beeping is supported
[    4.774659] btrfs: use ssd allocation scheme
[    4.774662] btrfs: use lzo compression
[    4.774664] btrfs: enabling auto defrag
[    4.774665] btrfs: disk space caching is enabled
[    4.780808] fuse init (API version 7.22)
[    4.783949] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
[    4.783954] ACPI: Power Button [PWRB]
[    4.784002] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[    4.784004] ACPI: Power Button [PWRF]
[    4.797850] parport_pc 00:07: reported by Plug and Play ACPI
[    4.797901] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[    4.803843] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    4.810285] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    4.810294] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    4.810487] r8169 0000:03:00.0: irq 46 for MSI/MSI-X
[    4.810624] r8169 0000:03:00.0 eth0: RTL8168d/8111d at 0xffffc90006cb2000, 00:24:1d:d9:1a:a7, XID 083000c0 IRQ 46
[    4.810626] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    4.818180] [drm] Initialized drm 1.1.0 20060810
[    4.835745] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \GP2C 1 (20131115/utaddress-251)
[    4.835750] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.835770] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    4.851291] input: iMON Panel, Knob and Mouse(15c2:0038) as /devices/pci0000:00/0000:00:1d.1/usb5/5-1/5-1:1.0/input/input7
[    4.851543] cfg80211: Calling CRDA to update world regulatory domain
[    4.852669] [drm] radeon kernel modesetting enabled.
[    4.852708] checking generic (e0000000 7f0000) vs hw (e0000000 10000000)
[    4.852709] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
[    4.852747] Console: switching to colour dummy device 80x25
[    4.853142] [drm] initializing kernel modesetting (PITCAIRN 0x1002:0x6818 0x1462:0x2740).
[    4.853165] [drm] register mmio base: 0xFBC80000
[    4.853166] [drm] register mmio size: 262144
[    4.853221] ATOM BIOS: 113
[    4.853292] radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
[    4.853294] radeon 0000:01:00.0: GTT: 1024M 0x0000000080000000 - 0x00000000BFFFFFFF
[    4.853296] [drm] Detected VRAM RAM=2048M, BAR=256M
[    4.853297] [drm] RAM width 256bits DDR
[    4.853329] [TTM] Zone  kernel: Available graphics memory: 8214956 kiB
[    4.853330] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    4.853331] [TTM] Initializing pool allocator
[    4.853335] [TTM] Initializing DMA pool allocator
[    4.853348] [drm] radeon: 2048M of VRAM memory ready
[    4.853349] [drm] radeon: 1024M of GTT memory ready.
[    4.859102] [drm] GART: num cpu pages 262144, num gpu pages 262144
[    4.859366] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[    4.860449] [drm] probing gen 2 caps for device 8086:d138 = 393d02/0
[    4.860454] [drm] PCIE gen 2 link speeds already enabled
[    4.862593] EDAC MC: Ver: 3.0.0
[    4.864016] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:3f:03.0 (POLLED)
[    4.864051] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:3f:03.0 (POLLED)
[    4.864055] EDAC i7core: Driver loaded, 1 memory controller(s) found.
[    4.869574] input: PC Speaker as /devices/platform/pcspkr/input/input9
[    4.874478] [drm] Loading PITCAIRN Microcode
[    4.877563] microcode: CPU0 sig=0x106e5, pf=0x2, revision=0x4
[    4.877608] platform microcode: Direct firmware load failed with error -2
[    4.877610] platform microcode: Falling back to user helper
[    4.882600] [drm] PCIE GART of 1024M enabled (table at 0x0000000000276000).
[    4.882750] radeon 0000:01:00.0: WB enabled
[    4.882753] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff8804051d3c00
[    4.882755] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff8804051d3c04
[    4.882757] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff8804051d3c08
[    4.882758] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff8804051d3c0c
[    4.882760] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff8804051d3c10
[    4.883765] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc90007335a18
[    4.883767] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    4.883768] [drm] Driver supports precise vblank timestamp query.
[    4.883785] radeon 0000:01:00.0: irq 47 for MSI/MSI-X
[    4.883793] radeon 0000:01:00.0: radeon: using MSI.
[    4.883821] [drm] radeon: irq initialized.
[    4.887858] Registered IR keymap rc-imon-pad
[    4.887925] input: iMON Remote (15c2:0038) as /devices/pci0000:00/0000:00:1d.1/usb5/5-1/5-1:1.0/rc/rc0/input8
[    4.889195] rc0: iMON Remote (15c2:0038) as /devices/pci0000:00/0000:00:1d.1/usb5/5-1/5-1:1.0/rc/rc0
[    4.897896] imon 5-1:1.0: iMON device (15c2:0038, intf0) on usb<5:2> initialized
[    4.897914] imon 5-1:1.1: iMON device (15c2:0038, intf1) on usb<5:2> initialized
[    4.897926] usbcore: registered new interface driver imon
[    4.913536] btrfs: device label ROOT devid 1 transid 24774 /dev/sdc3
[    4.936845] ppdev: user-space parallel port driver
[    4.946662] iTCO_vendor_support: vendor-support=0
[    4.948844] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[    4.948872] iTCO_wdt: Found a P55 TCO device (Version=2, TCOBASE=0x0460)
[    4.948955] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    4.950110] gpio_ich: GPIO from 180 to 255 on gpio_ich
[    4.955124] btrfs: device label HOME devid 1 transid 28896 /dev/sdc4
[    4.959706] microcode: CPU1 sig=0x106e5, pf=0x2, revision=0x4
[    4.959720] platform microcode: Direct firmware load failed with error -2
[    4.959722] platform microcode: Falling back to user helper
[    4.960971] cfg80211: World regulatory domain updated:
[    4.960973] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    4.960975] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[    4.960976] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[    4.960978] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[    4.960979] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[    4.960980] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[    4.960981] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[    4.964901] imon 5-1:1.0: Looks like you're trying to use an IR protocol this device does not support
[    4.964904] imon 5-1:1.0: Unsupported IR protocol specified, overriding to iMON IR protocol
[    4.967968] microcode: CPU2 sig=0x106e5, pf=0x2, revision=0x4
[    4.967981] platform microcode: Direct firmware load failed with error -2
[    4.967982] platform microcode: Falling back to user helper
[    4.969058] microcode: CPU3 sig=0x106e5, pf=0x2, revision=0x4
[    4.969070] platform microcode: Direct firmware load failed with error -2
[    4.969074] platform microcode: Falling back to user helper
[    4.970224] microcode: Microcode Update Driver: v2.00 <tigran at aivazian.fsnet.co.uk>, Peter Oruba
[    4.985007] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[    4.994266] btrfs: device label HOME devid 1 transid 28896 /dev/sdc4
[    4.997119] btrfs: use ssd allocation scheme
[    4.997122] btrfs: use lzo compression
[    4.997125] btrfs: enabling auto defrag
[    4.997126] btrfs: disk space caching is enabled
[    4.997127] btrfs: has skinny extents
[    5.057222] EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: discard
[    5.120753] [drm] ring test on 0 succeeded in 3 usecs
[    5.120759] [drm] ring test on 1 succeeded in 1 usecs
[    5.120764] [drm] ring test on 2 succeeded in 1 usecs
[    5.120830] [drm] ring test on 3 succeeded in 2 usecs
[    5.120841] [drm] ring test on 4 succeeded in 1 usecs
[    5.313331] [drm] ring test on 5 succeeded in 2 usecs
[    5.313339] [drm] UVD initialized successfully.
[    5.314678] [drm] Enabling audio 0 support
[    5.314680] [drm] Enabling audio 1 support
[    5.314681] [drm] Enabling audio 2 support
[    5.314682] [drm] Enabling audio 3 support
[    5.314684] [drm] Enabling audio 4 support
[    5.314685] [drm] Enabling audio 5 support
[    5.314750] [drm] ib test on ring 0 succeeded in 0 usecs
[    5.314808] [drm] ib test on ring 1 succeeded in 0 usecs
[    5.314865] [drm] ib test on ring 2 succeeded in 0 usecs
[    5.314898] [drm] ib test on ring 3 succeeded in 0 usecs
[    5.314931] [drm] ib test on ring 4 succeeded in 1 usecs
[    5.357230] ath: EEPROM regdomain: 0x809c
[    5.357233] ath: EEPROM indicates we should expect a country code
[    5.357234] ath: doing EEPROM country->regdmn map search
[    5.357236] ath: country maps to regdmn code: 0x52
[    5.357237] ath: Country alpha2 being used: CN
[    5.357238] ath: Regpair used: 0x52
[    5.368011] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    5.368320] ieee80211 phy0: Atheros AR5416 MAC/BB Rev:2 AR2133 RF Rev:81 mem=0xffffc90007a60000, irq=19
[    5.369504] cfg80211: Calling CRDA for country: CN
[    5.374879] cfg80211: Regulatory domain changed to country: CN
[    5.374881] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    5.374883] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[    5.374884] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2300 mBm)
[    5.374885] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm)
[    5.374887] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm)
[    5.374888] cfg80211:   (57240000 KHz - 59400000 KHz @ 2160000 KHz), (N/A, 2800 mBm)
[    5.374889] cfg80211:   (59400000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4400 mBm)
[    5.374890] cfg80211:   (63720000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 2800 mBm)
[    5.383427] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: barrier=1,acl,commit=60
[    5.386861] systemd-journald[179]: Received request to flush runtime journal from PID 1
[    5.477200] [drm] ib test on ring 5 succeeded
[    5.478020] [drm] Radeon Display Connectors
[    5.478022] [drm] Connector 0:
[    5.478023] [drm]   DP-1
[    5.478024] [drm]   HPD4
[    5.478026] [drm]   DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[    5.478027] [drm]   Encoders:
[    5.478028] [drm]     DFP1: INTERNAL_UNIPHY2
[    5.478029] [drm] Connector 1:
[    5.478030] [drm]   DP-2
[    5.478031] [drm]   HPD5
[    5.478033] [drm]   DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[    5.478034] [drm]   Encoders:
[    5.478035] [drm]     DFP2: INTERNAL_UNIPHY2
[    5.478036] [drm] Connector 2:
[    5.478037] [drm]   HDMI-A-1
[    5.478038] [drm]   HPD1
[    5.478039] [drm]   DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[    5.478040] [drm]   Encoders:
[    5.478041] [drm]     DFP3: INTERNAL_UNIPHY1
[    5.478042] [drm] Connector 3:
[    5.478043] [drm]   DVI-I-1
[    5.478044] [drm]   HPD6
[    5.478046] [drm]   DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c 0x658c
[    5.478047] [drm]   Encoders:
[    5.478048] [drm]     DFP4: INTERNAL_UNIPHY
[    5.478049] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    5.478112] [drm] Internal thermal controller with fan control
[    5.478169] [drm] probing gen 2 caps for device 8086:d138 = 393d02/0
[    5.478194] == power state 0 ==
[    5.478195] 	ui class: none
[    5.478197] 	internal class: boot 
[    5.478198] 	caps: 
[    5.478200] 	uvd    vclk: 0 dclk: 0
[    5.478201] 		power level 0    sclk: 15000 mclk: 15000 vddc: 900 vddci: 950 pcie gen: 2
[    5.478202] 	status: c r b 
[    5.478204] == power state 1 ==
[    5.478204] 	ui class: performance
[    5.478205] 	internal class: none
[    5.478206] 	caps: 
[    5.478207] 	uvd    vclk: 0 dclk: 0
[    5.478212] 		power level 0    sclk: 30000 mclk: 15000 vddc: 825 vddci: 850 pcie gen: 2
[    5.478214] 		power level 1    sclk: 45000 mclk: 120000 vddc: 900 vddci: 975 pcie gen: 2
[    5.478217] 		power level 2    sclk: 105000 mclk: 120000 vddc: 1219 vddci: 975 pcie gen: 2
[    5.478218] 	status: 
[    5.478220] == power state 2 ==
[    5.478221] 	ui class: none
[    5.478223] 	internal class: uvd 
[    5.478225] 	caps: video 
[    5.478228] 	uvd    vclk: 72000 dclk: 56000
[    5.478230] 		power level 0    sclk: 45000 mclk: 120000 vddc: 900 vddci: 975 pcie gen: 2
[    5.478233] 		power level 1    sclk: 45000 mclk: 120000 vddc: 900 vddci: 975 pcie gen: 2
[    5.478235] 		power level 2    sclk: 105000 mclk: 120000 vddc: 1219 vddci: 975 pcie gen: 2
[    5.478237] 	status: 
[    5.478238] == power state 3 ==
[    5.478240] 	ui class: none
[    5.478241] 	internal class: ulv 
[    5.478243] 	caps: 
[    5.478245] 	uvd    vclk: 0 dclk: 0
[    5.478248] 		power level 0    sclk: 30000 mclk: 15000 vddc: 825 vddci: 850 pcie gen: 2
[    5.478250] 		power level 1    sclk: 30000 mclk: 15000 vddc: 825 vddci: 850 pcie gen: 2
[    5.478253] 		power level 2    sclk: 30000 mclk: 15000 vddc: 825 vddci: 850 pcie gen: 2
[    5.478254] 	status: 
[    5.527373] ip_tables: (C) 2000-2006 Netfilter Core Team
[    5.712852] r8169 0000:03:00.0 eth0: link down
[    5.713497] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    5.720300] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    6.273277] switching from power state:
[    6.273280] 	ui class: none
[    6.273281] 	internal class: boot 
[    6.273283] 	caps: 
[    6.273284] 	uvd    vclk: 0 dclk: 0
[    6.273286] 		power level 0    sclk: 15000 mclk: 15000 vddc: 900 vddci: 950 pcie gen: 2
[    6.273287] 	status: c b 
[    6.273288] switching to power state:
[    6.273289] 	ui class: performance
[    6.273290] 	internal class: none
[    6.273291] 	caps: 
[    6.273292] 	uvd    vclk: 0 dclk: 0
[    6.273293] 		power level 0    sclk: 30000 mclk: 15000 vddc: 825 vddci: 850 pcie gen: 2
[    6.273294] 		power level 1    sclk: 45000 mclk: 120000 vddc: 900 vddci: 975 pcie gen: 2
[    6.273296] 		power level 2    sclk: 105000 mclk: 120000 vddc: 1219 vddci: 975 pcie gen: 2
[    6.273297] 	status: r 
[    6.944729] [drm] radeon: dpm initialized
[    7.028037] [drm] fb mappable at 0xE1480000
[    7.028040] [drm] vram apper at 0xE0000000
[    7.028041] [drm] size 8294400
[    7.028042] [drm] fb depth is 24
[    7.028043] [drm]    pitch is 7680
[    7.028106] fbcon: radeondrmfb (fb0) is primary device
[    7.028196] switching from power state:
[    7.028197] 	ui class: performance
[    7.028198] 	internal class: none
[    7.028198] 	caps: 
[    7.028199] 	uvd    vclk: 0 dclk: 0
[    7.028200] 		power level 0    sclk: 30000 mclk: 15000 vddc: 825 vddci: 850 pcie gen: 2
[    7.028201] 		power level 1    sclk: 45000 mclk: 120000 vddc: 900 vddci: 975 pcie gen: 2
[    7.028202] 		power level 2    sclk: 105000 mclk: 120000 vddc: 1219 vddci: 975 pcie gen: 2
[    7.028203] 	status: c r 
[    7.028203] switching to power state:
[    7.028203] 	ui class: performance
[    7.028204] 	internal class: none
[    7.028204] 	caps: 
[    7.028205] 	uvd    vclk: 0 dclk: 0
[    7.028205] 		power level 0    sclk: 30000 mclk: 15000 vddc: 825 vddci: 850 pcie gen: 2
[    7.028206] 		power level 1    sclk: 45000 mclk: 120000 vddc: 900 vddci: 975 pcie gen: 2
[    7.028207] 		power level 2    sclk: 105000 mclk: 120000 vddc: 1219 vddci: 975 pcie gen: 2
[    7.028208] 	status: c r 
[    7.682696] Console: switching to colour frame buffer device 240x67
[    7.687612] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[    7.687614] radeon 0000:01:00.0: registered panic notifier
[    7.687621] [drm] Initialized radeon 2.35.0 20080528 for 0000:01:00.0 on minor 0
[    7.687759] ALSA sound/pci/hda/hda_intel.c:3173 0000:01:00.1: Handle VGA-switcheroo audio client
[    7.687762] ALSA sound/pci/hda/hda_intel.c:3377 0000:01:00.1: Using LPIB position fix
[    7.687764] ALSA sound/pci/hda/hda_intel.c:3498 0000:01:00.1: Force to non-snoop mode
[    7.687816] snd_hda_intel 0000:01:00.1: irq 48 for MSI/MSI-X
[    7.688062] ALSA sound/pci/hda/hda_intel.c:3636 0000:01:00.1: chipset global capabilities = 0x0
[    7.690475] ALSA sound/pci/hda/hda_intel.c:1205 0000:01:00.1: codec_mask = 0x1
[    7.690527] ALSA sound/pci/hda/hda_intel.c:1678 0000:01:00.1: codec #0 probed OK
[    7.690529] ALSA sound/pci/hda/hda_intel.c:1799 0000:01:00.1: Enable sync_write for stable communication
[    7.700592] ALSA sound/pci/hda/patch_hdmi.c:1513 HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[    7.700605] ALSA sound/pci/hda/hda_eld.c:684 HDMI ATI/AMD: no speaker allocation for ELD
[    7.700635] ALSA sound/pci/hda/patch_hdmi.c:1513 HDMI status: Codec=0 Pin=5 Presence_Detect=1 ELD_Valid=1
[    7.700647] ALSA sound/pci/hda/hda_eld.c:684 HDMI ATI/AMD: no speaker allocation for ELD
[    7.700677] ALSA sound/pci/hda/patch_hdmi.c:1513 HDMI status: Codec=0 Pin=7 Presence_Detect=1 ELD_Valid=1
[    7.700689] ALSA sound/pci/hda/hda_eld.c:684 HDMI ATI/AMD: no speaker allocation for ELD
[    7.700720] ALSA sound/pci/hda/patch_hdmi.c:1513 HDMI status: Codec=0 Pin=9 Presence_Detect=1 ELD_Valid=1
[    7.700732] ALSA sound/pci/hda/hda_eld.c:684 HDMI ATI/AMD: no speaker allocation for ELD
[    7.700764] ALSA sound/pci/hda/patch_hdmi.c:1513 HDMI status: Codec=0 Pin=11 Presence_Detect=1 ELD_Valid=1
[    7.700776] ALSA sound/pci/hda/hda_eld.c:684 HDMI ATI/AMD: no speaker allocation for ELD
[    7.700811] ALSA sound/pci/hda/patch_hdmi.c:1513 HDMI status: Codec=0 Pin=13 Presence_Detect=1 ELD_Valid=1
[    7.700823] ALSA sound/pci/hda/hda_eld.c:684 HDMI ATI/AMD: no speaker allocation for ELD
[    7.700883] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card0/input15
[    7.701066] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card0/input14
[    7.701451] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card0/input13
[    7.701653] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card0/input12
[    7.701773] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card0/input11
[    7.702131] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card0/input10
[    8.221814] ALSA sound/pci/hda/patch_hdmi.c:1170 HDMI hot plug event: Codec=0 Pin=3 Device=0 Inactive=0 Presence_Detect=0 ELD_Valid=1
[    8.221855] ALSA sound/pci/hda/patch_hdmi.c:1513 HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[    8.222271] ALSA sound/pci/hda/hda_eld.c:442 HDMI: detected monitor  at connection type HDMI
[    8.222273] ALSA sound/pci/hda/hda_eld.c:447 HDMI: available speakers: FL/FR LFE FC RL/RR RC RLC/RRC
[    8.222277] ALSA sound/pci/hda/hda_eld.c:421 HDMI: supports coding type LPCM: channels = 8, rates = 32000 44100 48000 88200 96000 176400 192000, bits = 16 20 24
[    8.222280] ALSA sound/pci/hda/hda_eld.c:421 HDMI: supports coding type AC-3: channels = 6, rates = 32000 44100 48000, max bitrate = 640000
[    8.222283] ALSA sound/pci/hda/hda_eld.c:421 HDMI: supports coding type DTS: channels = 6, rates = 44100 48000 88200 96000, max bitrate = 1536000
[    8.222285] ALSA sound/pci/hda/hda_eld.c:421 HDMI: supports coding type E-AC-3/DD+ (Dolby Digital Plus): channels = 8, rates = 44100 48000
[    8.222288] ALSA sound/pci/hda/hda_eld.c:421 HDMI: supports coding type DTS-HD: channels = 8, rates = 44100 48000 88200 96000 176400 192000
[    8.222291] ALSA sound/pci/hda/hda_eld.c:421 HDMI: supports coding type MLP (Dolby TrueHD): channels = 8, rates = 44100 48000 88200 96000 176400 192000
[    8.384866] type=1006 audit(1386580017.776:2): pid=516 uid=0 old auid=4294967295 new auid=1000 old ses=4294967295 new ses=1 res=1
[    8.505458] ALSA sound/pci/hda/hda_intel.c:2185 0000:01:00.1: azx_pcm_prepare: bufsize=0xe100, format=0x15
[    8.505468] ALSA sound/pci/hda/patch_hdmi.c:678 HDMI: select CA 0xb for 6-channel allocation:  FL/FR LFE FC RL/RR RC RLC/RRC
[    8.505625] HDMI: ASP channel 0 => slot 0
[    8.505637] HDMI: ASP channel 1 => slot 1
[    8.505649] HDMI: ASP channel 5 => slot 2
[    8.505661] HDMI: ASP channel 4 => slot 3
[    8.505674] HDMI: ASP channel 2 => slot 4
[    8.505686] HDMI: ASP channel 3 => slot 5
[    8.505698] HDMI: ASP channel 15 => slot 6
[    8.505710] HDMI: ASP channel 15 => slot 7
[    8.505745] ALSA sound/pci/hda/patch_hdmi.c:3110 atihdmi_pin_hbr_setup: NID=0x3, hbr-ctl=0x1
[    8.505747] ALSA sound/pci/hda/hda_codec.c:1646 hda_codec_setup_stream: NID=0x2, stream=0x1, channel=0, format=0x15
[    8.510051] ALSA sound/pci/hda/hda_intel.c:2185 0000:01:00.1: azx_pcm_prepare: bufsize=0xe100, format=0x15
[    8.510058] ALSA sound/pci/hda/patch_hdmi.c:678 HDMI: select CA 0xb for 6-channel allocation:  FL/FR LFE FC RL/RR RC RLC/RRC
[    8.510184] HDMI: ASP channel 0 => slot 0
[    8.510196] HDMI: ASP channel 1 => slot 1
[    8.510208] HDMI: ASP channel 5 => slot 2
[    8.510220] HDMI: ASP channel 4 => slot 3
[    8.510232] HDMI: ASP channel 2 => slot 4
[    8.510245] HDMI: ASP channel 3 => slot 5
[    8.510257] HDMI: ASP channel 15 => slot 6
[    8.510269] HDMI: ASP channel 15 => slot 7
[    8.510304] ALSA sound/pci/hda/patch_hdmi.c:3110 atihdmi_pin_hbr_setup: NID=0x3, hbr-ctl=0x1
[    8.510306] ALSA sound/pci/hda/hda_codec.c:1646 hda_codec_setup_stream: NID=0x2, stream=0x1, channel=0, format=0x15
[    8.510561] ALSA sound/pci/hda/hda_codec.c:1693 hda_codec_cleanup_stream: NID=0x2
[    8.510934] ALSA sound/pci/hda/hda_codec.c:1693 hda_codec_cleanup_stream: NID=0x2
[    8.514187] ALSA sound/pci/hda/hda_intel.c:2185 0000:01:00.1: azx_pcm_prepare: bufsize=0xe100, format=0x15
[    8.514197] ALSA sound/pci/hda/patch_hdmi.c:678 HDMI: select CA 0xb for 6-channel allocation:  FL/FR LFE FC RL/RR RC RLC/RRC
[    8.514345] HDMI: ASP channel 0 => slot 0
[    8.514359] HDMI: ASP channel 1 => slot 1
[    8.514371] HDMI: ASP channel 5 => slot 2
[    8.514383] HDMI: ASP channel 4 => slot 3
[    8.514395] HDMI: ASP channel 2 => slot 4
[    8.514408] HDMI: ASP channel 3 => slot 5
[    8.514420] HDMI: ASP channel 15 => slot 6
[    8.514432] HDMI: ASP channel 15 => slot 7
[    8.514467] ALSA sound/pci/hda/patch_hdmi.c:3110 atihdmi_pin_hbr_setup: NID=0x3, hbr-ctl=0x1
[    8.514469] ALSA sound/pci/hda/hda_codec.c:1646 hda_codec_setup_stream: NID=0x2, stream=0x1, channel=0, format=0x15
[    8.514483] ALSA sound/pci/hda/hda_intel.c:2185 0000:01:00.1: azx_pcm_prepare: bufsize=0xe100, format=0x15
[    8.514488] ALSA sound/pci/hda/patch_hdmi.c:678 HDMI: select CA 0xb for 6-channel allocation:  FL/FR LFE FC RL/RR RC RLC/RRC
[    8.514613] HDMI: ASP channel 0 => slot 0
[    8.514625] HDMI: ASP channel 1 => slot 1
[    8.514637] HDMI: ASP channel 5 => slot 2
[    8.514650] HDMI: ASP channel 4 => slot 3
[    8.514662] HDMI: ASP channel 2 => slot 4
[    8.514674] HDMI: ASP channel 3 => slot 5
[    8.514686] HDMI: ASP channel 15 => slot 6
[    8.514698] HDMI: ASP channel 15 => slot 7
[    8.514733] ALSA sound/pci/hda/patch_hdmi.c:3110 atihdmi_pin_hbr_setup: NID=0x3, hbr-ctl=0x1
[    8.514735] ALSA sound/pci/hda/hda_codec.c:1646 hda_codec_setup_stream: NID=0x2, stream=0x1, channel=0, format=0x15
[    8.514982] ALSA sound/pci/hda/hda_codec.c:1693 hda_codec_cleanup_stream: NID=0x2
[    8.515320] ALSA sound/pci/hda/hda_codec.c:1693 hda_codec_cleanup_stream: NID=0x2
[    8.519602] ALSA sound/pci/hda/hda_intel.c:2185 0000:01:00.1: azx_pcm_prepare: bufsize=0xe100, format=0x15
[    8.519612] ALSA sound/pci/hda/patch_hdmi.c:678 HDMI: select CA 0xb for 6-channel allocation:  FL/FR LFE FC RL/RR RC RLC/RRC
[    8.519769] HDMI: ASP channel 0 => slot 0
[    8.519781] HDMI: ASP channel 1 => slot 1
[    8.519793] HDMI: ASP channel 5 => slot 2
[    8.519805] HDMI: ASP channel 4 => slot 3
[    8.519817] HDMI: ASP channel 2 => slot 4
[    8.519830] HDMI: ASP channel 3 => slot 5
[    8.519842] HDMI: ASP channel 15 => slot 6
[    8.519854] HDMI: ASP channel 15 => slot 7
[    8.519889] ALSA sound/pci/hda/patch_hdmi.c:3110 atihdmi_pin_hbr_setup: NID=0x3, hbr-ctl=0x1
[    8.519891] ALSA sound/pci/hda/hda_codec.c:1646 hda_codec_setup_stream: NID=0x2, stream=0x1, channel=0, format=0x15
[    8.519905] ALSA sound/pci/hda/hda_intel.c:2185 0000:01:00.1: azx_pcm_prepare: bufsize=0xe100, format=0x15
[    8.519910] ALSA sound/pci/hda/patch_hdmi.c:678 HDMI: select CA 0xb for 6-channel allocation:  FL/FR LFE FC RL/RR RC RLC/RRC
[    8.520714] HDMI: ASP channel 0 => slot 0
[    8.520727] HDMI: ASP channel 1 => slot 1
[    8.520739] HDMI: ASP channel 5 => slot 2
[    8.520751] HDMI: ASP channel 4 => slot 3
[    8.520763] HDMI: ASP channel 2 => slot 4
[    8.520775] HDMI: ASP channel 3 => slot 5
[    8.520787] HDMI: ASP channel 15 => slot 6
[    8.520800] HDMI: ASP channel 15 => slot 7
[    8.520835] ALSA sound/pci/hda/patch_hdmi.c:3110 atihdmi_pin_hbr_setup: NID=0x3, hbr-ctl=0x1
[    8.520837] ALSA sound/pci/hda/hda_codec.c:1646 hda_codec_setup_stream: NID=0x2, stream=0x1, channel=0, format=0x15
[   13.537723] ALSA sound/pci/hda/hda_codec.c:1693 hda_codec_cleanup_stream: NID=0x2
[   13.538072] ALSA sound/pci/hda/hda_codec.c:1693 hda_codec_cleanup_stream: NID=0x2
[   13.661547] wlan0: authenticate with 00:23:69:65:2b:59
[   13.665981] wlan0: send auth to 00:23:69:65:2b:59 (try 1/3)
[   13.690182] wlan0: authenticated
[   13.693626] wlan0: associate with 00:23:69:65:2b:59 (try 1/3)
[   13.698360] wlan0: RX AssocResp from 00:23:69:65:2b:59 (capab=0x411 status=0 aid=2)
[   13.698423] wlan0: associated
[   13.698682] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   56.210117] ALSA sound/pci/hda/hda_intel.c:2185 0000:01:00.1: azx_pcm_prepare: bufsize=0xe100, format=0x15
[   56.210127] ALSA sound/pci/hda/patch_hdmi.c:678 HDMI: select CA 0xb for 6-channel allocation:  FL/FR LFE FC RL/RR RC RLC/RRC
[   56.210254] HDMI: ASP channel 0 => slot 0
[   56.210266] HDMI: ASP channel 1 => slot 1
[   56.210278] HDMI: ASP channel 5 => slot 2
[   56.210290] HDMI: ASP channel 4 => slot 3
[   56.210302] HDMI: ASP channel 2 => slot 4
[   56.210315] HDMI: ASP channel 3 => slot 5
[   56.210327] HDMI: ASP channel 15 => slot 6
[   56.210339] HDMI: ASP channel 15 => slot 7
[   56.210387] ALSA sound/pci/hda/patch_hdmi.c:3110 atihdmi_pin_hbr_setup: NID=0x3, hbr-ctl=0x1
[   56.210389] ALSA sound/pci/hda/hda_codec.c:1646 hda_codec_setup_stream: NID=0x2, stream=0x1, channel=0, format=0x15
[   56.210403] ALSA sound/pci/hda/hda_intel.c:2185 0000:01:00.1: azx_pcm_prepare: bufsize=0xe100, format=0x15
[   56.210409] ALSA sound/pci/hda/patch_hdmi.c:678 HDMI: select CA 0xb for 6-channel allocation:  FL/FR LFE FC RL/RR RC RLC/RRC
[   56.210534] HDMI: ASP channel 0 => slot 0
[   56.210546] HDMI: ASP channel 1 => slot 1
[   56.210558] HDMI: ASP channel 5 => slot 2
[   56.210570] HDMI: ASP channel 4 => slot 3
[   56.210582] HDMI: ASP channel 2 => slot 4
[   56.210595] HDMI: ASP channel 3 => slot 5
[   56.210607] HDMI: ASP channel 15 => slot 6
[   56.210619] HDMI: ASP channel 15 => slot 7
[   56.210654] ALSA sound/pci/hda/patch_hdmi.c:3110 atihdmi_pin_hbr_setup: NID=0x3, hbr-ctl=0x1
[   56.210656] ALSA sound/pci/hda/hda_codec.c:1646 hda_codec_setup_stream: NID=0x2, stream=0x1, channel=0, format=0x15
[   71.196647] ALSA sound/pci/hda/hda_codec.c:1693 hda_codec_cleanup_stream: NID=0x2
[   71.197277] ALSA sound/pci/hda/hda_codec.c:1693 hda_codec_cleanup_stream: NID=0x2
[  191.271118] type=1006 audit(1386580201.178:3): pid=2374 uid=0 old auid=4294967295 new auid=1005 old ses=4294967295 new ses=2 res=1
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Xorg.0-v4.log
Type: text/x-log
Size: 54342 bytes
Desc: not available
URL: <http://mailman.alsa-project.org/pipermail/alsa-devel/attachments/20131209/030a4829/attachment-0001.bin>


More information about the Alsa-devel mailing list