[alsa-devel] [alsa-cvslog] [ALSA GIT]ALSA utilities repository branch master updated. v1.0.26-26-ge05b903

Takashi Iwai tiwai at suse.de
Wed Apr 10 08:10:09 CEST 2013


At Tue, 09 Apr 2013 22:07:03 +0200,
David Henningsson wrote:
> 
> On 04/09/2013 06:11 PM, Takashi Iwai wrote:
> > At Tue, 09 Apr 2013 17:52:23 +0200,
> > Jaroslav Kysela wrote:
> >>
> >> Date 9.4.2013 14:47, Takashi Iwai wrote:
> >>> At Mon,  8 Apr 2013 14:51:54 +0200 (CEST),
> >>> GIT server wrote:
> >>>>
> >>>> This is an automated email from the git hooks/post-receive script. It was
> >>>> generated because a ref change was pushed to the repository containing
> >>>> the project "ALSA utilities repository".
> >>>>
> >>>> The branch, master has been updated
> >>>>         via  e05b903b1fb16e967d838edac408304cd4470fee (commit)
> >>>>        from  46cb355d4ff41c8065b02644b0534ab42d16cb72 (commit)
> >>>>
> >>>> Those revisions listed above that are new to this repository have
> >>>> not appeared on any other notification email; so we list those
> >>>> revisions in full, below.
> >>>>
> >>>> - Log -----------------------------------------------------------------
> >>>> commit e05b903b1fb16e967d838edac408304cd4470fee
> >>>> Author: Jaroslav Kysela <perex at perex.cz>
> >>>> Date:   Mon Apr 8 14:49:31 2013 +0200
> >>>>
> >>>>      alsactl: move systemd config to the daemon mode
> >>>>
> >>>>      Signed-off-by: Jaroslav Kysela <perex at perex.cz>
> >>>
> >>> I'm not thrilled by the silent default behavior change like this.
> >>> This will affect all systems using systemd from now on.
> >>>
> >>> I understand the reason behind it, but I wonder whether it's an
> >>> overkill.  Yet another daemon, unconditionally no matter whether
> >>> hotplug or not?  Hmm...
> >>
> >> The question is, how we can detect the hotplug scheme. Almost all
> >> systems have USB today and laptops have PCI express card slots, so....
> >> Fedora has the systemd configs in the alsa-utils package. A removal of
> >> this package is sufficient do disable the daemon.
> >
> > Yes, but then this would break the formerly working environment, too.
> >
> >> Eventually, we can
> >> save the state periodically using cron (without the changes tracking),
> >> but my measurement is that the alsactl daemon eats approx. 150kb of memory.
> >
> > I'm not concerned about alsactl memory footprint so much.
> > But having another daemon unconditionally just to save/restore the
> > mixer status is a question.
> >
> >> Some other quick ideas:
> >>
> >> - make the static/hotplug schemes depending on an environment variable
> >>    passed through the bootloader
> >> - another two packages on top of alsa-utils with two configs
> >
> > Manageable, but maybe will become a bit messy...
> >
> >> - save the last state inside the driver and offer it to the userspace
> >>    upon the card removal (seems overkill)
> >
> > This won't be that bad, I think.  But, accessing the information after
> > removal is the problem, after all.  The device and proc files are
> > removed at disconnection, so user-space can't access it.  Otherwise
> > the normal "alsactl store" should have worked.  So this can't be a
> > card-basis interface.
> >
> > A possible w/a would be that we can keep some stable ctl lists and
> > provide it as a (one-time) death message from a global proc or a sysfs
> > file, for example.  Then we don't need periodical sync.
> >
> > Whether this is a better option?  I dunno, honestly, too...
> 
> Coming from a non-systemd world...
> 
> Is the problem you're trying to solve that mixer state is not saved on 
> hot-unplug; and if so, is this not working for non-systemd installations 
> either then? Or is it systemd that causes this problem?
> 
> I was expecting that when you unplug something, some kind of synchronous 
> udev event was fired, which could read the current mixer state and save 
> it, before it all goes away. But perhaps this was too optimistic...

This was the implementation, so far, and known to be broken.  alsactl
was triggered by udev. But, in the case of hotplug, when it's
unplugged, there is no more device file.  Thus you can't get the mixer
status _after_ the unplug. And, of course, the udev event is triggered
at the disconnection, that is, it's performed after the unplug.

Jaroslav's change is to start alsactl as a system daemon by systemd,
and let it keeping all mixer states in background.

> FWIW; another option is never to save it unless explicitly requested by 
> the user. There is definitely a use case where you want to avoid any 
> sound on bootup, e g if you often boot up your computer in a student 
> class - regardless of what it was when you turned it off earlier you 
> want silence on boot.
> 
> (And now we haven't even touched PulseAudio's own save/restore volume 
> stuff...)

I wonder what about other OS.  Is the mixer status of a USB device
recorded and resumed after reboot at hotplug?


Takashi


More information about the Alsa-devel mailing list