[alsa-devel] [PATCH 00/34] i.MX multi-platform support
s.hauer at pengutronix.de
Mon Sep 17 09:51:38 CEST 2012
On Mon, Sep 17, 2012 at 01:34:29PM +0800, Shawn Guo wrote:
> The series enables multi-platform support for imx. Since the required
> frameworks (clk, pwm) and spare_irq have already been adopted on imx,
> the series is all about cleaning up mach/* headers. Along with the
> changes, arch/arm/plat-mxc gets merged into arch/arm/mach-imx.
> It's based on a bunch of branches (works from others), Rob's initial
> multi-platform series, Arnd's platform-data and smp_ops (Marc's) and
> imx 3.7 material (Sascha and myself).
> It's available on branch below.
> git://git.linaro.org/people/shawnguo/linux-2.6.git imx/multi-platform
> It's been tested on imx5 and imx6, and only compile-tested on imx2 and
> imx3, so testing on imx2/3 are appreciated.
Great work! This really pushes the i.MX architecture one step closer to
a clean code base.
I gave it a test on i.MX1, i.MX27, i.MX31 and i.MX35. All run fine, but
the last patch breaks the imx_v4_v5_defconfig: Somehow it now defaults
to ARMv7 based machines. I haven't looked into it, just reenabled
ARMv4/ARMv5 and the boards again -> works. The config should be updated
with the last patch.
I'm fine with the changes to mx2-camera, but Javier should give his ok
to it, he has worked on it quite a lot recently.
One other issue related to imx-dma, see comment to that patch.
Acked-by: Sascha Hauer <s.hauer at pengutronix.de>
Tested-by: Sascha Hauer <s.hauer at pengutronix.de>
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the Alsa-devel