[alsa-devel] [PATCH v3 00/14] MFD/ASoC/Input: twl4030-audio submodule DT support
peter.ujfalusi at ti.com
Thu Sep 6 14:12:07 CEST 2012
Generated on top of:
Changed since v2:
- Added commit message to patch 2 (as Tero requested it)
- Fixed patch 6 (dt: Add empty...) since the previous patch caused x86_64 build
to fail due to missing struct before device_node.
Changes since v1:
- Get the MCLK frequencey from twl-core driver (via new API)
- hs_extmute_disable_level parameter has been removed
- empty of_find_node_by_name() in of.h for !CONFIG_OF builds
Mark: the extmute GPIO handling (when it is used) remained in the codec driver
for now. I can think more on how to add support for this type of mute control.
If you can point me to other codec needing this it would help on designing
something which is common enough for other users.
As for now I have a separate series to add GPIO controlled output amps (hp/spk).
I will send that to review soon. Currently this piece of code does not work when
booted with device tree since I have done it on n900 which has the GPIO numbers
as defines. I need to revisit the aproach on how to do it in a dynamic way.
Introl mail from v1:
The following series adds DT support for the twl4030 audio submodule which
provides audio codec and vibra functionality.
The MFD core driver is probed via DT, it will create the needed child devices
based on the provided information in the DT blob.
Child drivers (vibra, ASoC codec) will parse the core's node if needed to get
the needed parameters for their configuration.
In the ASoC codec driver the hs_extmute callback (which was used to toggle a
GPIO line) has been removed. The codec driver will receive the GPIO number
(if it is needed on the platform).
If the series is OK (and no objections from the maintainers), it would be good
if this can go via audio. Changed files are well contained within the
twl4030-audio stack so I do not expect merge issues later.
The series has been tested on BeagleBoard (with the McBSP DT series, and with
the upcoming DT audio support for BeagleBoard).
Peter Ujfalusi (14):
MFD: twl4030-audio: Clean up MODULE_* and platform_driver part
MFD: twl4030-audio: Convert to use devm_kzalloc
MFD: twl4030-audio: Rearange and clean-up the probe function
MFD: twl-core: Add API to query the HFCLK rate
MFD: twl4030-audio: Get audio MCLK via twl-core API instead of pdata
dt: Add empty of_find_node_by_name() function
MFD: twl4030-audio: Add DT support
Input: twl4030-vibra: Support for DT booted kernel
ASoC: twl4030: Move hs_extmute GPIO handling to driver
ARM: OMAP/ASoC: Zoom2: Let the codec to handle the hs_extmute GPIO
ASoC/MFD: twl4030: Remove set_hs_extmute callback from platform data
ASoC: twl4030: Convert to use devm_kzalloc
ASoC: twl4030: Add pointer to pdata within the private data
ASoC: twl4030: Support for DT booted kernel
.../devicetree/bindings/mfd/twl4030-audio.txt | 46 +++++++++
arch/arm/mach-omap2/board-zoom-peripherals.c | 9 +-
arch/arm/mach-omap2/include/mach/board-zoom.h | 2 -
drivers/input/misc/twl4030-vibra.c | 20 +++-
drivers/mfd/twl-core.c | 32 ++++++
drivers/mfd/twl4030-audio.c | 107 ++++++++++++++-------
include/linux/i2c/twl.h | 3 +-
include/linux/of.h | 6 ++
sound/soc/codecs/twl4030.c | 103 ++++++++++++++++----
sound/soc/omap/zoom2.c | 4 -
10 files changed, 261 insertions(+), 71 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mfd/twl4030-audio.txt
More information about the Alsa-devel