[alsa-devel] macmini5,3 and imac27 ssid conflict
tiwai at suse.de
Tue Oct 30 13:21:55 CET 2012
At Tue, 30 Oct 2012 20:14:25 +0800,
Raymond Yau wrote:
> > > how many audio jacks do your macmini have ?
> > >
> > > seem only line in support jack detect, internal mic support balanced but
> > > ext mic does not support jack detect
> > There are two audio jacks:
> > 1. An analogue headset/external speakers jack. Note that in order for the
> external speakers to work, I need to use HDA Analyser to change the
> settings otherwise things remain stuck on the internal speaker. I did not
> try an analogue headset.
> > 2. An analogue line-in jack. I tried this with a powered condenser
> microphone - I can hear a recording, but the level is too low for practical
> > I'm not sure there is an internal microphone connected - shouting at the
> mac mini box does not produce an audible recording :P
> Advanced information - PCI Vendor/Device/Subsystem ID's
> 00:1b.0 0403: 8086:1c20 (rev 05)
> Subsystem: 8086:7270
> your macmini pci subsystem is also 8086:7270 which is same as imac27
8086:7270 PCI SSID is no longer referred. The codec SSID are checked
> the pin default of your macmini (init_pin_config) is replaced by the pin
> config of model imac27 (driver_pin_config)
> Codec: Cirrus Logic CS4206
> Address: 0 AFG Function Id: 0x1 (unsol 0)
> Vendor Id: 0x10134206
> Subsystem Id: 0x106b2100
> is the subsystem id in codec unique ?
It should be.
More information about the Alsa-devel