[alsa-devel] [PATCH 0/3] ARM: OMAP: Add platform devices for ASoC HDMI drivers

Ricardo Neri ricardo.neri at ti.com
Fri May 4 03:51:15 CEST 2012


Hi Tony,

This is me again; asking if you had any chance to look at these patches.

Thanks!

Ricardo
On 04/25/2012 06:29 PM, Ricardo Neri wrote:
> Hi Tony,
>
> I was wondering if you've had the time to take a look at these patches.
>
> Thanks!
>
> Ricardo
> On 04/17/2012 07:40 PM, Ricardo Neri wrote:
>> This set of patches is intended to add the platform devices for the ASoC
>> HDMI drivers when not using device tree. For this, I took an approach
>> similar
>> to DMIC and McPDM by creating a dedicated functions to create the
>> devices.
>>
>> I included the device for the CPU DAI driver, omap-hdmi-audio-dai, and
>> the
>> device for the machine driver, omap-hdmi-audio, in devices.c to
>> reflect the
>> fact that any OMAP4 (and OMAP5 in the future) has HDMI IP. I put the
>> device
>> for the codec in the board file to reflect the fact that not
>> necessarily all
>> the boards with OMAP4/5 have the HDMI output wired.
>>
>> Best regards
>>
>> Ricardo
>>
>> Ricardo Neri (3):
>> ARM: OMAP: devices: Register platform devices for HDMI audio
>> ARM: OMAP4: board-4430sdp: Register platform device for HDMI audio
>> codec
>> ARM: OMAP4: board-omap4panda: Register platform device for HDMI audio
>> codec
>>
>> arch/arm/mach-omap2/board-4430sdp.c | 6 ++++++
>> arch/arm/mach-omap2/board-omap4panda.c | 6 ++++++
>> arch/arm/mach-omap2/devices.c | 31 +++++++++++++++++++++++++++++++
>> 3 files changed, 43 insertions(+), 0 deletions(-)
>>
>



More information about the Alsa-devel mailing list