[alsa-devel] [PATCH] ASoC: da7210: Add support for spi regmap

[Mark Brown]

On Wed, Mar 21, 2012 at 09:22:50PM +0530, Ashish Chavan wrote:

> +#if defined(CONFIG_SPI_MASTER)
> +	/* Dummy read to give two pulses over nCS */
> +	regmap_read(da7210->regmap, DA7210_STATUS, &val);
> +	regmap_read(da7210->regmap, DA7210_STATUS, &val);
> +	regmap_read(da7210->regmap, DA7210_STATUS, &val);
> +#endif

This ifdef stuff should all be runtime configured based on the bus type,
unless the cost of the reads is considered immaterial in which case it
should be unconditional.

> +#if defined(CONFIG_SPI_MASTER)
> +	snd_soc_write(codec, 0x00, 0x80);
> +#endif

Hrm?

>  	/* unlock */
>  	regmap_write(da7210->regmap, DA7210_A_HID_UNLOCK,	0x8B);
> @@ -1035,6 +1056,10 @@ static int da7210_probe(struct snd_soc_codec *codec)
>  	regmap_write(da7210->regmap, DA7210_A_HID_UNLOCK,	0x00);
>  	regmap_write(da7210->regmap, DA7210_A_TEST_UNLOCK,	0x00);

I also note that you've not yet updated this to use a regmap patch as
was previously requested.

> +#if defined(CONFIG_SPI_MASTER)
> +static int __devinit da7210_spi_probe(struct spi_device *spi)
> +{
> +	struct da7210_priv *da7210;
> +	int ret;
> +
> +	da7210 = kzalloc(sizeof(struct da7210_priv), GFP_KERNEL);
> +	if (!da7210)
> +		return -ENOMEM;

devm_kzalloc().

> +	da7210_regmap.read_flag_mask = 0x01;
> +	da7210_regmap.write_flag_mask = 0x00;

Just have a second, static, regmap variable.  The regmap should be
declared const.

> +	da7210->regmap = regmap_init_spi(spi, &da7210_regmap);

devm_regmap_init_spi() (will come in in the merge window).

> +static struct spi_driver da7210_spi_driver = {
> +	.driver = {
> +		.name = "da7210-codec",

No -codec.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
Url : http://mailman.alsa-project.org/pipermail/alsa-devel/attachments/20120321/88a7de55/attachment.sig