[alsa-devel] [PATCH v6] sound/soc/codecs: add LAPIS Semiconductor ML26124

Tomoya MORINAGA tomoya.rohm at gmail.com
Fri Mar 16 10:55:09 CET 2012

On Thu, Mar 15, 2012 at 3:29 PM, Tomoya MORINAGA <tomoya.rohm at gmail.com> wrote:
>> If this is for all registers, how does stuff like DAPM work, which uses the
>> framework internal update_bits function?
>> If it's the case that the write address is always read address + 1 you can
>> still use the framework if you set write_flag_mask to 0x01 in your regmap
>> config. In my opinion it even makes sense to shift all the register numbers
>> to the left by one and use a 7/9 instead of a 8/8 addr/reg layout. This will
>> reduce the amount of memory wasted due to holes in the register cache.
> Thank you for your information.
> I've just been investigating these.
> I also found ASoC core access i2c driver via snd_soc_update_bits or others.
> As a result, write register address is the same as read's.
> I'll try to implement these.
> BTW, currently, by settting ML26124 codec with fixed value,
> I've confirmed both playback and capture work well.

Thank you for your help,
almost of ML26124 registers can be set correctly except SUPPLY.
So, I have a question.

When SND_SOC_DAPM_SUPPLY is executed ?
Do I need to execute from application (like amixer) ?

thanks in advance.

ROHM Co., Ltd.

More information about the Alsa-devel mailing list