[alsa-devel] tea575x-tuner improvements & use in maxiradio

[Ondrej Zary]

On Wednesday 08 February 2012 08:29:25 Hans Verkuil wrote:
> On Tuesday, February 07, 2012 23:20:19 Ondrej Zary wrote:
> > On Sunday 05 February 2012 14:17:05 Hans Verkuil wrote:
> > > These patches improve the tea575x-tuner module to make it up to date
> > > with the latest V4L2 frameworks.
> > >
> > > The maxiradio driver has also been converted to use the tea575x-tuner
> > > and I've used that card to test it.
> > >
> > > Unfortunately, this card can't read the data pin, so the new hardware
> > > seek functionality has been tested only partially (yes, it seeks, but
> > > when it finds a channel I can't read back the frequency).
> > >
> > > Ondrej, are you able to test these patches for the sound cards that use
> > > this tea575x tuner?
> > >
> > > Note that these two patches rely on other work that I did and that
> > > hasn't been merged yet. So it is best to pull from my git tree:
> > >
> > > http://git.linuxtv.org/hverkuil/media_tree.git/shortlog/refs/heads/radi
> > >o-pc i2
> > >
> > > You can use the v4l-utils repository
> > > (http://git.linuxtv.org/v4l-utils.git) to test the drivers: the
> > > v4l2-compliance test should succeed and with v4l2-ctl you can test the
> > > hardware seek:
> > >
> > > To seek down:
> > >
> > > v4l2-ctl -d /dev/radio0 --freq-seek=dir=0
> > >
> > > To seek up:
> > >
> > > v4l2-ctl -d /dev/radio0 --freq-seek=dir=1
> > >
> > > To do the compliance test:
> > >
> > > v4l2-compliance -r /dev/radio0
> >
> > It seems to work (tested with SF64-PCR - snd_fm801) but the seek is
> > severely broken. Reading the frequency immediately after seek does not
> > work, it always returns the old value (haven't found a delay that works).
> > Reading it later (copied back snd_tea575x_get_freq function) works. The
> > chip seeks randomly up or down, ignoring UP/DOWN flag and often stops at
> > wrong place (only noise) or even outside the FM range.
> >
> > So I strongly suggest not to enable this (mis-)feature. The HW seems to
> > be completely broken (unless there's some weird bug in the code).
>
> Well, it seemed like a good idea at the time :-) I'll remove this
> 'feature', it's really not worth our time to try and make this work for
> these old cards.
>
> I wonder if you are able to test the ISA radio-sf16fmr2.c driver? I'm not
> sure if you have the hardware, but since I changed this driver to use the
> proper isa kernel framework I'd like to have this tested if possible.

The driver works, provided that linux/slab.h is included. It oopses on rmmod
because dev_set_drvdata() call is missing from init.
This patch fixes all of that and also removes (now useless) static fmr2_card:

--- a/drivers/media/radio/radio-sf16fmr2.c
+++ b/drivers/media/radio/radio-sf16fmr2.c
@@ -9,6 +9,7 @@
 #include <linux/delay.h>
 #include <linux/module.h>	/* Modules 			*/
 #include <linux/init.h>		/* Initdata			*/
+#include <linux/slab.h>
 #include <linux/ioport.h>	/* request_region		*/
 #include <linux/io.h>		/* outb, outb_p			*/
 #include <linux/isa.h>
@@ -32,7 +33,6 @@ struct fmr2 {
 
 /* the port is hardwired so no need to support multiple cards */
 #define FMR2_PORT	0x384
-static struct fmr2 fmr2_card;
 
 /* TEA575x tuner pins */
 #define STR_DATA	(1 << 0)
@@ -188,7 +188,7 @@ static int fmr2_tea_ext_init(struct snd_tea575x *tea)
 
 static int __init fmr2_probe(struct device *pdev, unsigned int dev)
 {
-	struct fmr2 *fmr2 = &fmr2_card;
+	struct fmr2 *fmr2;
 	int err;
 
 	fmr2 = kzalloc(sizeof(*fmr2), GFP_KERNEL);
@@ -229,6 +229,7 @@ static int __init fmr2_probe(struct device *pdev, unsigned int dev)
 	}
 
 	printk(KERN_INFO "radio-sf16fmr2: SF16-FMR2 radio card at 0x%x.\n", fmr2->io);
+	dev_set_drvdata(pdev, fmr2);
 	return 0;
 }
 



-- 
Ondrej Zary