[alsa-devel] SAIF configuration on imx28

[Dong Aisheng]

On Thu, Aug 23, 2012 at 02:41:30PM +0800, George Stefan wrote:
...
>    /*set the saif clk mux, saif0/saif1 both use saif0 clk*/
>    __raw_writel(BF_DIGCTL_CTRL_SAIF_CLKMUX_SEL(0x0),               \
Should this be 0x2 if both saif0 and saif1 are using saif0 clk?

>    IO_ADDRESS(DIGCTL_PHYS_ADDR) + HW_DIGCTL_CTRL);
>    Using this configuration i am not able to receive IRQs from DMA and i
>    think the reason
>    is that SAIF is not receiving the CLK.
>    What do you think?
>    Thanks,
>    George.

Regards
Dong Aisheng