[alsa-devel] [PATCH 04/11] i2c: imx: add pinctrl support

Richard Zhao richard.zhao at freescale.com
Fri Apr 27 09:02:58 CEST 2012


Signed-off-by: Richard Zhao <richard.zhao at freescale.com>
---
 arch/arm/boot/dts/imx6q-sabrelite.dts |    2 ++
 arch/arm/boot/dts/imx6q.dtsi          |   16 ++++++++++++++++
 drivers/i2c/busses/i2c-imx.c          |    9 +++++++++
 3 files changed, 27 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
index 4663a4e..4e13293 100644
--- a/arch/arm/boot/dts/imx6q-sabrelite.dts
+++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
@@ -50,6 +50,8 @@
 			i2c at 021a0000 { /* I2C1 */
 				status = "okay";
 				clock-frequency = <100000>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c1_1>;
 
 				codec: sgtl5000 at 0a {
 					compatible = "fsl,sgtl5000";
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index 2ba32e7..fe8c80d 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -390,6 +390,22 @@
 				reg = <0x020e0000 0x4000>;
 
 				/* shared pinctrl settings */
+				i2c1 {
+					pinctrl_i2c1_1: i2c1grp-1 {
+						fsl,pins =	"MX6Q_PAD_EIM_D21",
+								"MX6Q_PAD_EIM_D28";
+						fsl,hysteresis = <1>;
+						fsl,mux = <0x16 0x11>;
+						fsl,pull = <2>;
+						fsl,pue = <1>;
+						fsl,pke = <1>;
+						fsl,open-drain = <1>;
+						fsl,speed = <2>;
+						fsl,drive-strength = <6>;
+						fsl,slew-rate = <1>;
+					};
+				};
+
 				uart4 {
 					pinctrl_uart4_1: uart4grp-1 {
 						fsl,pins =	"MX6Q_PAD_KEY_COL0",
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index dfb84b7..7a52067 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -48,6 +48,7 @@
 #include <linux/platform_device.h>
 #include <linux/clk.h>
 #include <linux/slab.h>
+#include <linux/pinctrl/consumer.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/of_i2c.h>
@@ -470,6 +471,7 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
 	struct imx_i2c_struct *i2c_imx;
 	struct resource *res;
 	struct imxi2c_platform_data *pdata = pdev->dev.platform_data;
+	struct pinctrl *pct;
 	void __iomem *base;
 	resource_size_t res_size;
 	int irq, bitrate;
@@ -520,6 +522,13 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
 	i2c_imx->base			= base;
 	i2c_imx->res			= res;
 
+	pct = devm_pinctrl_get_select_default(&pdev->dev);
+	if (IS_ERR(pct)) {
+		dev_err(&pdev->dev, "can't get/select pinctrl\n");
+		ret = PTR_ERR(pct);
+		goto fail3;
+	}
+
 	/* Get I2C clock */
 	i2c_imx->clk = clk_get(&pdev->dev, "i2c_clk");
 	if (IS_ERR(i2c_imx->clk)) {
-- 
1.7.5.4




More information about the Alsa-devel mailing list