[alsa-devel] M-Audio FastTrack C400
Chris Cavey
chris-alsa at rauros.net
Thu Apr 19 13:19:06 CEST 2012
entire log
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-23-generic (buildd at crested) (gcc
version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu4) ) #36-Ubuntu SMP Tue Apr 10
20:39:51 UTC 2012 (Ubuntu 3.2.0-23.36-generic 3.2.14)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-23-generic
root=UUID=ec96128d-feb6-40e6-a5aa-b55aa2219935 ro
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfff0000 (usable)
[ 0.000000] BIOS-e820: 00000000dfff0000 - 00000000e0000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.5 present.
[ 0.000000] DMI: innotek GmbH VirtualBox, BIOS VirtualBox 12/01/2006
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000
(usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000
(usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR variable ranges disabled:
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
[ 0.000000] CPU MTRRs all blank - virtualized system.
[ 0.000000] last_pfn = 0xdfff0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff88000009fff0] 9fff0
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000dfff0000
[ 0.000000] 0000000000 - 00dfe00000 page 2M
[ 0.000000] 00dfe00000 - 00dfff0000 page 4k
[ 0.000000] kernel direct mapping tables up to dfff0000 @
1fffa000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000120000000
[ 0.000000] 0100000000 - 0120000000 page 2M
[ 0.000000] kernel direct mapping tables up to 120000000 @
dffea000-dfff0000
[ 0.000000] RAMDISK: 364ec000 - 3726e000
[ 0.000000] ACPI: RSDP 00000000000e0000 00024 (v02 VBOX )
[ 0.000000] ACPI: XSDT 00000000dfff0030 0003C (v01 VBOX VBOXXSDT
00000001 ASL 00000061)
[ 0.000000] ACPI: FACP 00000000dfff00f0 000F4 (v04 VBOX VBOXFACP
00000001 ASL 00000061)
[ 0.000000] ACPI: DSDT 00000000dfff0480 01B96 (v01 VBOX VBOXBIOS
00000002 INTL 20100528)
[ 0.000000] ACPI: FACS 00000000dfff0200 00040
[ 0.000000] ACPI: APIC 00000000dfff0240 0006C (v02 VBOX VBOXAPIC
00000001 ASL 00000061)
[ 0.000000] ACPI: SSDT 00000000dfff02b0 001CC (v01 VBOX VBOXCPUT
00000002 INTL 20100528)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000120000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000120000000
[ 0.000000] NODE_DATA [000000011fffb000 - 000000011fffffff]
[ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD ->
[ffff88011b600000-ffff88011f5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00120000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000dfff0
[ 0.000000] 0: 0x00100000 -> 0x00120000
[ 0.000000] On node 0 totalpages: 1048447
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3914 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 897072 pages, LIFO batch:31
[ 0.000000] Normal zone: 2048 pages used for memmap
[ 0.000000] Normal zone: 129024 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI
0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 -
0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000dfff0000 -
00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 -
00000000fffc0000
[ 0.000000] PM: Registered nosave memory: 00000000fffc0000 -
0000000100000000
[ 0.000000] Allocating PCI resources starting at e0000000 (gap:
e0000000:1ffc0000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256
nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011fc00000 s83072
r8192 d23424 u524288
[ 0.000000] pcpu-alloc: s83072 r8192 d23424 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on.
Total pages: 1030010
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-23-generic
root=UUID=ec96128d-feb6-40e6-a5aa-b55aa2219935 ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 4032084k/4718592k available (6566k kernel code,
524804k absent, 161704k reserved, 6637k data, 920k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0,
CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:712 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't
want memory cgroups
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3385.153 MHz processor.
[ 0.004003] Calibrating delay loop (skipped), value calculated using
timer frequency.. 6770.30 BogoMIPS (lpj=13540612)
[ 0.004007] pid_max: default: 32768 minimum: 301
[ 0.004023] Security Framework initialized
[ 0.004033] AppArmor: AppArmor initialized
[ 0.004035] Yama: becoming mindful.
[ 0.004588] Dentry cache hash table entries: 524288 (order: 10,
4194304 bytes)
[ 0.005520] Inode-cache hash table entries: 262144 (order: 9, 2097152
bytes)
[ 0.005792] Mount-cache hash table entries: 256
[ 0.005903] Initializing cgroup subsys cpuacct
[ 0.005908] Initializing cgroup subsys memory
[ 0.005913] Initializing cgroup subsys devices
[ 0.005916] Initializing cgroup subsys freezer
[ 0.005918] Initializing cgroup subsys blkio
[ 0.005922] Initializing cgroup subsys perf_event
[ 0.006124] CPU: Physical Processor ID: 0
[ 0.006127] CPU: Processor Core ID: 0
[ 0.006143] mce: CPU supports 0 MCE banks
[ 0.024772] ACPI: Core revision 20110623
[ 0.025296] ftrace: allocating 27049 entries in 107 pages
[ 0.036357] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.076499] CPU0: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz stepping 07
[ 0.080004] Performance Events: unsupported p6 CPU model 42 no PMU
driver, software events only.
[ 0.080004] NMI watchdog disabled (cpu0): hardware events not enabled
[ 0.080004] Booting Node 0, Processors #1
[ 0.080004] smpboot cpu 1: start_ip = 9a000
[ 0.008000] mce: CPU supports 0 MCE banks
[ 0.168009] TSC synchronization [CPU#0 -> CPU#1]:
[ 0.168009] Measured 195227 cycles TSC warp between CPUs, turning off
TSC clock.
[ 0.168009] Marking TSC unstable due to check_tsc_sync_source failed
[ 0.168030] NMI watchdog disabled (cpu1): hardware events not enabled
[ 0.168227] #2
[ 0.168228] smpboot cpu 2: start_ip = 9a000
[ 0.008000] mce: CPU supports 0 MCE banks
[ 0.256324] NMI watchdog disabled (cpu2): hardware events not enabled
[ 0.256528] #3 Ok.
[ 0.256529] smpboot cpu 3: start_ip = 9a000
[ 0.008000] mce: CPU supports 0 MCE banks
[ 0.344331] NMI watchdog disabled (cpu3): hardware events not enabled
[ 0.344371] Brought up 4 CPUs
[ 0.344373] Total of 4 processors activated (27145.08 BogoMIPS).
[ 0.345354] devtmpfs: initialized
[ 0.345354] EVM: security.selinux
[ 0.345354] EVM: security.SMACK64
[ 0.345354] EVM: security.capability
[ 0.345354] print_constraints: dummy:
[ 0.345354] RTC time: 10:28:42, date: 04/19/12
[ 0.345354] NET: Registered protocol family 16
[ 0.345354] ACPI: bus type pci registered
[ 0.345354] PCI: Using configuration type 1 for base access
[ 0.345354] Trying to unpack rootfs image as initramfs...
[ 0.348353] bio: create slab <bio-0> at 0
[ 0.348353] ACPI: Added _OSI(Module Device)
[ 0.348353] ACPI: Added _OSI(Processor Device)
[ 0.348353] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.348353] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.348353] ACPI: EC: Look up EC in DSDT
[ 0.348547] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.350447] ACPI: Interpreter enabled
[ 0.350450] ACPI: (supports S0 S5)
[ 0.350459] ACPI: Using IOAPIC for interrupt routing
[ 0.352692] ACPI: No dock devices found.
[ 0.352695] HEST: Table not found.
[ 0.352697] PCI: Ignoring host bridge windows from ACPI; if
necessary, use "pci=use_crs" and report a bug
[ 0.352738] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.352813] pci_root PNP0A03:00: host bridge window [io
0x0000-0x0cf7] (ignored)
[ 0.352815] pci_root PNP0A03:00: host bridge window [io
0x0d00-0xffff] (ignored)
[ 0.352816] pci_root PNP0A03:00: host bridge window [mem
0x000a0000-0x000bffff] (ignored)
[ 0.352818] pci_root PNP0A03:00: host bridge window [mem
0xe0000000-0xffdfffff] (ignored)
[ 0.352852] pci 0000:00:00.0: [8086:1237] type 0 class 0x000600
[ 0.353150] pci 0000:00:01.0: [8086:7000] type 0 class 0x000601
[ 0.353567] pci 0000:00:01.1: [8086:7111] type 0 class 0x000101
[ 0.353885] pci 0000:00:01.1: reg 20: [io 0xd000-0xd00f]
[ 0.354120] pci 0000:00:02.0: [80ee:beef] type 0 class 0x000300
[ 0.356449] pci 0000:00:02.0: reg 10: [mem 0xe0000000-0xe0ffffff pref]
[ 0.372789] pci 0000:00:03.0: [1af4:1000] type 0 class 0x000200
[ 0.372900] pci 0000:00:03.0: reg 10: [io 0xd020-0xd03f]
[ 0.373432] pci 0000:00:04.0: [80ee:cafe] type 0 class 0x000880
[ 0.376229] pci 0000:00:04.0: reg 10: [io 0xd040-0xd05f]
[ 0.380229] pci 0000:00:04.0: reg 14: [mem 0xf0000000-0xf03fffff]
[ 0.382891] pci 0000:00:04.0: reg 18: [mem 0xf0400000-0xf0403fff pref]
[ 0.392444] pci 0000:00:06.0: [106b:003f] type 0 class 0x000c03
[ 0.396234] pci 0000:00:06.0: reg 10: [mem 0xf0404000-0xf0404fff]
[ 0.411054] pci 0000:00:07.0: [8086:7113] type 0 class 0x000680
[ 0.412109] pci 0000:00:0b.0: [8086:265c] type 0 class 0x000c03
[ 0.414940] pci 0000:00:0b.0: reg 10: [mem 0xf0405000-0xf0405fff]
[ 0.431155] pci 0000:00:0d.0: [8086:2829] type 0 class 0x000106
[ 0.432285] pci 0000:00:0d.0: reg 10: [io 0xd060-0xd067]
[ 0.440252] pci 0000:00:0d.0: reg 18: [io 0xd070-0xd077]
[ 0.444431] pci 0000:00:0d.0: reg 20: [io 0xd080-0xd08f]
[ 0.448447] pci 0000:00:0d.0: reg 24: [mem 0xf0406000-0xf0407fff]
[ 0.453161] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.454249] pci0000:00: Unable to request _OSC control (_OSC support
mask: 0x1e)
[ 0.460028] ACPI: PCI Interrupt Link [LNKA] (IRQs *5 9 10 11)
[ 0.460448] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 10 *11)
[ 0.460566] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 *10 11)
[ 0.460681] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *9 10 11)
[ 0.461127] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.461127] vgaarb: loaded
[ 0.461127] vgaarb: bridge control possible 0000:00:02.0
[ 0.461127] i2c-core: driver [aat2870] using legacy suspend method
[ 0.461127] i2c-core: driver [aat2870] using legacy resume method
[ 0.461127] SCSI subsystem initialized
[ 0.461127] libata version 3.00 loaded.
[ 0.461127] usbcore: registered new interface driver usbfs
[ 0.461127] usbcore: registered new interface driver hub
[ 0.461127] usbcore: registered new device driver usb
[ 0.461127] PCI: Using ACPI for IRQ routing
[ 0.461127] PCI: pci_cache_line_size set to 64 bytes
[ 0.461127] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.461127] reserve RAM buffer: 00000000dfff0000 - 00000000dfffffff
[ 0.461127] NetLabel: Initializing
[ 0.461127] NetLabel: domain hash size = 128
[ 0.461127] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.461127] NetLabel: unlabeled traffic allowed by default
[ 0.469329] AppArmor: AppArmor Filesystem Enabled
[ 0.469352] pnp: PnP ACPI init
[ 0.469365] ACPI: bus type pnp registered
[ 0.469424] pnp 00:00: [bus 00-ff]
[ 0.469425] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.469427] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.469428] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.469431] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.469432] pnp 00:00: [mem 0xe0000000-0xffdfffff window]
[ 0.469454] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.469465] pnp 00:01: [io 0x0060]
[ 0.469466] pnp 00:01: [io 0x0064]
[ 0.469492] pnp 00:01: [irq 1]
[ 0.469507] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.469513] pnp 00:02: [io 0x0000-0x000f]
[ 0.469514] pnp 00:02: [io 0x0080-0x008f]
[ 0.469515] pnp 00:02: [io 0x00c0-0x00df]
[ 0.469516] pnp 00:02: [dma 4]
[ 0.469527] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.469569] pnp 00:03: [irq 12]
[ 0.469584] pnp 00:03: Plug and Play ACPI device, IDs PNP0f03 (active)
[ 0.469593] pnp 00:04: [io 0x0378-0x037f]
[ 0.469594] pnp 00:04: [io 0x0778-0x077f]
[ 0.469612] pnp 00:04: [irq 7]
[ 0.469626] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.469954] pnp: PnP ACPI: found 5 devices
[ 0.469956] ACPI: ACPI bus type pnp unregistered
[ 0.479843] Switching to clocksource acpi_pm
[ 0.479942] PCI: max bus depth: 0 pci_try_num: 1
[ 0.479960] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.479964] pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff]
[ 0.479989] NET: Registered protocol family 2
[ 0.479989] IP route cache hash table entries: 131072 (order: 8,
1048576 bytes)
[ 0.479989] TCP established hash table entries: 524288 (order: 11,
8388608 bytes)
[ 0.479989] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.479989] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.479989] TCP reno registered
[ 0.479989] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.479989] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.479989] NET: Registered protocol family 1
[ 0.479989] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.479989] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.479989] pci 0000:00:02.0: Boot video device
[ 0.479989] pci 0000:00:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 0.536224] pci 0000:00:06.0: PCI INT A disabled
[ 0.536281] pci 0000:00:0b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.536419] pci 0000:00:0b.0: PCI INT A disabled
[ 0.536438] PCI: CLS 64 bytes, default 64
[ 0.536440] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.536442] Placing 64MB software IO TLB between ffff8800dbfea000 -
ffff8800dffea000
[ 0.536445] software IO TLB at phys 0xdbfea000 - 0xdffea000
[ 0.536534] platform rtc_cmos: registered platform RTC device (no PNP
device found)
[ 0.537218] audit: initializing netlink socket (disabled)
[ 0.537228] type=2000 audit(1334831321.536:1): initialized
[ 0.559691] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.569424] VFS: Disk quotas dquot_6.5.2
[ 0.569466] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.570011] fuse init (API version 7.17)
[ 0.570131] msgmni has been set to 7875
[ 0.571849] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
[ 0.571976] io scheduler noop registered
[ 0.571979] io scheduler deadline registered
[ 0.572009] io scheduler cfq registered (default)
[ 0.572158] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.572176] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.572258] ACPI: Deprecated procfs I/F for AC is loaded, please
retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.572298] ACPI: AC Adapter [AC] (on-line)
[ 0.572375] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.572380] ACPI: Power Button [PWRF]
[ 0.572433] input: Sleep Button as
/devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
[ 0.572437] ACPI: Sleep Button [SLPF]
[ 0.573452] ERST: Table is not found!
[ 0.573454] GHES: HEST is not enabled!
[ 0.573530] virtio-pci 0000:00:03.0: PCI INT A -> GSI 19 (level, low)
-> IRQ 19
[ 0.573727] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.605871] Freeing initrd memory: 13832k freed
[ 1.248951] Linux agpgart interface v0.103
[ 1.254544] brd: module loaded
[ 1.256947] loop: module loaded
[ 1.257314] ahci 0000:00:0d.0: version 3.0
[ 1.257415] ahci 0000:00:0d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 1.257633] ahci: SSS flag set, parallel bus scan disabled
[ 1.257942] ahci 0000:00:0d.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps
0x1 impl SATA mode
[ 1.257951] ahci 0000:00:0d.0: flags: 64bit ncq stag only ccc
[ 1.258674] scsi0 : ahci
[ 1.258767] ata1: SATA max UDMA/133 abar m8192 at 0xf0406000 port
0xf0406100 irq 21
[ 1.258844] ata_piix 0000:00:01.1: version 2.13
[ 1.259824] scsi1 : ata_piix
[ 1.260317] scsi2 : ata_piix
[ 1.260374] ata2: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000
irq 14
[ 1.260380] ata3: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xd008
irq 15
[ 1.260804] Fixed MDIO Bus: probed
[ 1.260817] tun: Universal TUN/TAP device driver, 1.6
[ 1.260818] tun: (C) 1999-2004 Max Krasnyansky <maxk at qualcomm.com>
[ 1.261638] PPP generic driver version 2.4.2
[ 1.262079] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.262122] ehci_hcd 0000:00:0b.0: PCI INT A -> GSI 19 (level, low)
-> IRQ 19
[ 1.262195] ehci_hcd 0000:00:0b.0: EHCI Host Controller
[ 1.262430] ehci_hcd 0000:00:0b.0: new USB bus registered, assigned
bus number 1
[ 1.262761] ehci_hcd 0000:00:0b.0: irq 19, io mem 0xf0405000
[ 1.272188] ehci_hcd 0000:00:0b.0: USB 2.0 started, EHCI 1.00
[ 1.272644] hub 1-0:1.0: USB hub found
[ 1.272654] hub 1-0:1.0: 8 ports detected
[ 1.272827] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.272898] ohci_hcd 0000:00:06.0: PCI INT A -> GSI 22 (level, low)
-> IRQ 22
[ 1.272984] ohci_hcd 0000:00:06.0: OHCI Host Controller
[ 1.273269] ohci_hcd 0000:00:06.0: new USB bus registered, assigned
bus number 2
[ 1.273417] ohci_hcd 0000:00:06.0: irq 22, io mem 0xf0404000
[ 1.329002] hub 2-0:1.0: USB hub found
[ 1.329032] hub 2-0:1.0: 8 ports detected
[ 1.329525] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.329601] usbcore: registered new interface driver libusual
[ 1.329655] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M]
at 0x60,0x64 irq 1,12
[ 1.330733] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.330748] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.331290] mousedev: PS/2 mouse device common for all mice
[ 1.332223] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input2
[ 1.332913] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 1.333075] rtc0: alarms up to one day, 114 bytes nvram
[ 1.333222] device-mapper: uevent: version 1.0.3
[ 1.333528] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19)
initialised: dm-devel at redhat.com
[ 1.333559] cpuidle: using governor ladder
[ 1.333563] cpuidle: using governor menu
[ 1.333567] EFI Variables Facility v0.08 2004-May-17
[ 1.333859] TCP cubic registered
[ 1.334011] NET: Registered protocol family 10
[ 1.334802] NET: Registered protocol family 17
[ 1.334835] Registering the dns_resolver key type
[ 1.335954] PM: Hibernation image not present or could not be loaded.
[ 1.335973] registered taskstats version 1
[ 1.360349] Magic number: 8:400:477
[ 1.360600] rtc_cmos rtc_cmos: setting system clock to 2012-04-19
10:28:43 UTC (1334831323)
[ 1.360808] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.360813] EDD information not available.
[ 1.417071] ata3.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
[ 1.418236] ata3.00: configured for UDMA/33
[ 1.576294] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.576442] ata1.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
[ 1.576449] ata1.00: 16777216 sectors, multi 128: LBA48 NCQ (depth 31/32)
[ 1.576637] ata1.00: configured for UDMA/133
[ 1.577145] scsi 0:0:0:0: Direct-Access ATA VBOX HARDDISK
1.0 PQ: 0 ANSI: 5
[ 1.577596] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.577628] sd 0:0:0:0: [sda] 16777216 512-byte logical blocks: (8.58
GB/8.00 GiB)
[ 1.578323] sd 0:0:0:0: [sda] Write Protect is off
[ 1.578332] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.578580] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1.578765] scsi 2:0:0:0: CD-ROM VBOX CD-ROM
1.0 PQ: 0 ANSI: 5
[ 1.579836] sr0: scsi3-mmc drive: 32x/32x xa/form2 tray
[ 1.579853] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.580258] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.580557] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 1.581366] sda: sda1 sda2 < sda5 >
[ 1.583094] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.584231] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 1.585305] Freeing unused kernel memory: 920k freed
[ 1.585472] Write protecting the kernel read-only data: 12288k
[ 1.593051] Freeing unused kernel memory: 1608k freed
[ 1.599031] Freeing unused kernel memory: 1196k freed
[ 1.637534] udevd[101]: starting version 175
[ 1.771768] EXT4-fs (sda1): mounted filesystem with ordered data
mode. Opts: (null)
[ 1.874977] hrtimer: interrupt took 107977688 ns
[ 2.224241] usb 2-1: new full-speed USB device number 2 using ohci_hcd
[ 4.998829] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5.015680] udevd[296]: starting version 175
[ 5.046608] Adding 4192252k swap on /dev/sda5. Priority:-1 extents:1
across:4192252k
[ 5.084794] piix4_smbus 0000:00:07.0: SMBus base address
uninitialized - upgrade BIOS or use force_addr=0xaddr
[ 5.090614] lp: driver loaded but no devices found
[ 5.096851] type=1400 audit(1334831327.232:2): apparmor="STATUS"
operation="profile_load" name="/sbin/dhclient" pid=359
comm="apparmor_parser"
[ 5.097421] type=1400 audit(1334831327.232:3): apparmor="STATUS"
operation="profile_load"
name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=359
comm="apparmor_parser"
[ 5.097656] type=1400 audit(1334831327.232:4): apparmor="STATUS"
operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script"
pid=359 comm="apparmor_parser"
[ 5.142805] pci 0000:00:04.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 5.148416] input: M-Audio Fast Track C400 as
/devices/pci0000:00/0000:00:0b.0/usb1/1-1/1-1:1.5/input/input3
[ 5.150294] input: Unspecified device as /devices/virtual/input/input4
[ 5.151404] vboxguest: major 0, IRQ 20, I/O port d040, MMIO at
00000000f0000000 (size 0x400000)
[ 5.151407] vboxguest: Successfully loaded version 4.1.12 (interface
0x00010004)
[ 5.153200] generic-usb 0003:0763:2030.0001: input,hidraw0: USB HID
v1.10 Keyboard [M-Audio Fast Track C400] on usb-0000:00:0b.0-1/input5
[ 5.154104] input: ImExPS/2 Generic Explorer Mouse as
/devices/platform/i8042/serio1/input/input5
[ 5.173055] parport_pc 00:04: reported by Plug and Play ACPI
[ 5.176070] input: VirtualBox USB Tablet as
/devices/pci0000:00/0000:00:06.0/usb2/2-1/2-1:1.0/input/input6
[ 5.176363] generic-usb 0003:80EE:0021.0002: input,hidraw1: USB HID
v1.10 Mouse [VirtualBox USB Tablet] on usb-0000:00:06.0-1/input0
[ 5.176376] usbcore: registered new interface driver usbhid
[ 5.176377] usbhid: USB HID core driver
[ 5.193484] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 5.197201] ppdev: user-space parallel port driver
[ 5.284929] snd-usb-audio: probe of 1-1:1.1 failed with error -5
[ 5.290898] snd-usb-audio: probe of 1-1:1.2 failed with error -5
[ 5.296928] snd-usb-audio: probe of 1-1:1.3 failed with error -5
[ 5.303749] usbcore: registered new interface driver snd-usb-audio
[ 5.568497] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 5.568501] vesafb: scrolling: redraw
[ 5.568505] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 5.568573] mtrr: your processor doesn't support write-combining
[ 5.568906] vesafb: framebuffer at 0xe0000000, mapped to
0xffffc90003f00000, using 1216k, total 1216k
[ 5.569237] Console: switching to colour frame buffer device 80x30
[ 5.573612] fb0: VESA VGA frame buffer device
[ 7.628873] init: failsafe main process (676) killed by TERM signal
[ 7.686842] type=1400 audit(1334831329.820:5): apparmor="STATUS"
operation="profile_load" name="/usr/sbin/tcpdump" pid=856
comm="apparmor_parser"
[ 7.686955] type=1400 audit(1334831329.820:6): apparmor="STATUS"
operation="profile_replace" name="/sbin/dhclient" pid=854
comm="apparmor_parser"
[ 7.687523] type=1400 audit(1334831329.820:7): apparmor="STATUS"
operation="profile_replace"
name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=854
comm="apparmor_parser"
[ 7.687836] type=1400 audit(1334831329.820:8): apparmor="STATUS"
operation="profile_replace"
name="/usr/lib/connman/scripts/dhclient-script" pid=854
comm="apparmor_parser"
[ 7.881629] vboxsf: Successfully loaded version 4.1.12 (interface
0x00010004)
[ 15.552201] eth0: no IPv6 routers present
On 4/19/2012 7:09 AM, Grant Diffey wrote:
> On Thu, Apr 19, 2012 at 8:26 PM, Chris Cavey<chris-alsa at rauros.net> wrote:
>
>> Complete snippet from the log
>>
>> [ 374.104138] usbcore: deregistering interface driver snd-usb-audio
>> [ 374.875660] snd-usb-audio: probe of 1-1:1.1 failed with error -5
>> [ 374.881649] snd-usb-audio: probe of 1-1:1.2 failed with error -5
>> [ 374.887654] snd-usb-audio: probe of 1-1:1.3 failed with error -5
>> [ 374.895366] usbcore: registered new interface driver snd-usb-audio
>>
>> Sidenote - While I don't have a midi device to test with, it would
>> appear that the midi portion registers correctly and is accessible (at
>> least through amidi and aplaymidi)
>>
>> On 04/19/2012 04:53 AM, Clemens Ladisch wrote:
>>> Chris Cavey wrote:
>>>> snd-usb-audio: probe of 1-1:1.1 failed with error -5
>>>> snd-usb-audio: probe of 1-1:1.2 failed with error -5
>>>> snd-usb-audio: probe of 1-1:1.3 failed with error -5
>>> Are there no other messages immediately before this?
>>>
>>
> that looks like a snippet on unload can I have another 10 lines either side?
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel at alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
-------------- next part --------------
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-23-generic (buildd at crested) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu4) ) #36-Ubuntu SMP Tue Apr 10 20:39:51 UTC 2012 (Ubuntu 3.2.0-23.36-generic 3.2.14)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-23-generic root=UUID=ec96128d-feb6-40e6-a5aa-b55aa2219935 ro
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfff0000 (usable)
[ 0.000000] BIOS-e820: 00000000dfff0000 - 00000000e0000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.5 present.
[ 0.000000] DMI: innotek GmbH VirtualBox, BIOS VirtualBox 12/01/2006
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR variable ranges disabled:
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] CPU MTRRs all blank - virtualized system.
[ 0.000000] last_pfn = 0xdfff0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff88000009fff0] 9fff0
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000dfff0000
[ 0.000000] 0000000000 - 00dfe00000 page 2M
[ 0.000000] 00dfe00000 - 00dfff0000 page 4k
[ 0.000000] kernel direct mapping tables up to dfff0000 @ 1fffa000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000120000000
[ 0.000000] 0100000000 - 0120000000 page 2M
[ 0.000000] kernel direct mapping tables up to 120000000 @ dffea000-dfff0000
[ 0.000000] RAMDISK: 364ec000 - 3726e000
[ 0.000000] ACPI: RSDP 00000000000e0000 00024 (v02 VBOX )
[ 0.000000] ACPI: XSDT 00000000dfff0030 0003C (v01 VBOX VBOXXSDT 00000001 ASL 00000061)
[ 0.000000] ACPI: FACP 00000000dfff00f0 000F4 (v04 VBOX VBOXFACP 00000001 ASL 00000061)
[ 0.000000] ACPI: DSDT 00000000dfff0480 01B96 (v01 VBOX VBOXBIOS 00000002 INTL 20100528)
[ 0.000000] ACPI: FACS 00000000dfff0200 00040
[ 0.000000] ACPI: APIC 00000000dfff0240 0006C (v02 VBOX VBOXAPIC 00000001 ASL 00000061)
[ 0.000000] ACPI: SSDT 00000000dfff02b0 001CC (v01 VBOX VBOXCPUT 00000002 INTL 20100528)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000120000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000120000000
[ 0.000000] NODE_DATA [000000011fffb000 - 000000011fffffff]
[ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011b600000-ffff88011f5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00120000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000dfff0
[ 0.000000] 0: 0x00100000 -> 0x00120000
[ 0.000000] On node 0 totalpages: 1048447
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3914 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 897072 pages, LIFO batch:31
[ 0.000000] Normal zone: 2048 pages used for memmap
[ 0.000000] Normal zone: 129024 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000dfff0000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000fffc0000
[ 0.000000] PM: Registered nosave memory: 00000000fffc0000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:1ffc0000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011fc00000 s83072 r8192 d23424 u524288
[ 0.000000] pcpu-alloc: s83072 r8192 d23424 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1030010
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-23-generic root=UUID=ec96128d-feb6-40e6-a5aa-b55aa2219935 ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 4032084k/4718592k available (6566k kernel code, 524804k absent, 161704k reserved, 6637k data, 920k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:712 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3385.153 MHz processor.
[ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6770.30 BogoMIPS (lpj=13540612)
[ 0.004007] pid_max: default: 32768 minimum: 301
[ 0.004023] Security Framework initialized
[ 0.004033] AppArmor: AppArmor initialized
[ 0.004035] Yama: becoming mindful.
[ 0.004588] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.005520] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.005792] Mount-cache hash table entries: 256
[ 0.005903] Initializing cgroup subsys cpuacct
[ 0.005908] Initializing cgroup subsys memory
[ 0.005913] Initializing cgroup subsys devices
[ 0.005916] Initializing cgroup subsys freezer
[ 0.005918] Initializing cgroup subsys blkio
[ 0.005922] Initializing cgroup subsys perf_event
[ 0.006124] CPU: Physical Processor ID: 0
[ 0.006127] CPU: Processor Core ID: 0
[ 0.006143] mce: CPU supports 0 MCE banks
[ 0.024772] ACPI: Core revision 20110623
[ 0.025296] ftrace: allocating 27049 entries in 107 pages
[ 0.036357] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.076499] CPU0: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz stepping 07
[ 0.080004] Performance Events: unsupported p6 CPU model 42 no PMU driver, software events only.
[ 0.080004] NMI watchdog disabled (cpu0): hardware events not enabled
[ 0.080004] Booting Node 0, Processors #1
[ 0.080004] smpboot cpu 1: start_ip = 9a000
[ 0.008000] mce: CPU supports 0 MCE banks
[ 0.168009] TSC synchronization [CPU#0 -> CPU#1]:
[ 0.168009] Measured 195227 cycles TSC warp between CPUs, turning off TSC clock.
[ 0.168009] Marking TSC unstable due to check_tsc_sync_source failed
[ 0.168030] NMI watchdog disabled (cpu1): hardware events not enabled
[ 0.168227] #2
[ 0.168228] smpboot cpu 2: start_ip = 9a000
[ 0.008000] mce: CPU supports 0 MCE banks
[ 0.256324] NMI watchdog disabled (cpu2): hardware events not enabled
[ 0.256528] #3 Ok.
[ 0.256529] smpboot cpu 3: start_ip = 9a000
[ 0.008000] mce: CPU supports 0 MCE banks
[ 0.344331] NMI watchdog disabled (cpu3): hardware events not enabled
[ 0.344371] Brought up 4 CPUs
[ 0.344373] Total of 4 processors activated (27145.08 BogoMIPS).
[ 0.345354] devtmpfs: initialized
[ 0.345354] EVM: security.selinux
[ 0.345354] EVM: security.SMACK64
[ 0.345354] EVM: security.capability
[ 0.345354] print_constraints: dummy:
[ 0.345354] RTC time: 10:28:42, date: 04/19/12
[ 0.345354] NET: Registered protocol family 16
[ 0.345354] ACPI: bus type pci registered
[ 0.345354] PCI: Using configuration type 1 for base access
[ 0.345354] Trying to unpack rootfs image as initramfs...
[ 0.348353] bio: create slab <bio-0> at 0
[ 0.348353] ACPI: Added _OSI(Module Device)
[ 0.348353] ACPI: Added _OSI(Processor Device)
[ 0.348353] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.348353] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.348353] ACPI: EC: Look up EC in DSDT
[ 0.348547] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.350447] ACPI: Interpreter enabled
[ 0.350450] ACPI: (supports S0 S5)
[ 0.350459] ACPI: Using IOAPIC for interrupt routing
[ 0.352692] ACPI: No dock devices found.
[ 0.352695] HEST: Table not found.
[ 0.352697] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.352738] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.352813] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.352815] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.352816] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.352818] pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xffdfffff] (ignored)
[ 0.352852] pci 0000:00:00.0: [8086:1237] type 0 class 0x000600
[ 0.353150] pci 0000:00:01.0: [8086:7000] type 0 class 0x000601
[ 0.353567] pci 0000:00:01.1: [8086:7111] type 0 class 0x000101
[ 0.353885] pci 0000:00:01.1: reg 20: [io 0xd000-0xd00f]
[ 0.354120] pci 0000:00:02.0: [80ee:beef] type 0 class 0x000300
[ 0.356449] pci 0000:00:02.0: reg 10: [mem 0xe0000000-0xe0ffffff pref]
[ 0.372789] pci 0000:00:03.0: [1af4:1000] type 0 class 0x000200
[ 0.372900] pci 0000:00:03.0: reg 10: [io 0xd020-0xd03f]
[ 0.373432] pci 0000:00:04.0: [80ee:cafe] type 0 class 0x000880
[ 0.376229] pci 0000:00:04.0: reg 10: [io 0xd040-0xd05f]
[ 0.380229] pci 0000:00:04.0: reg 14: [mem 0xf0000000-0xf03fffff]
[ 0.382891] pci 0000:00:04.0: reg 18: [mem 0xf0400000-0xf0403fff pref]
[ 0.392444] pci 0000:00:06.0: [106b:003f] type 0 class 0x000c03
[ 0.396234] pci 0000:00:06.0: reg 10: [mem 0xf0404000-0xf0404fff]
[ 0.411054] pci 0000:00:07.0: [8086:7113] type 0 class 0x000680
[ 0.412109] pci 0000:00:0b.0: [8086:265c] type 0 class 0x000c03
[ 0.414940] pci 0000:00:0b.0: reg 10: [mem 0xf0405000-0xf0405fff]
[ 0.431155] pci 0000:00:0d.0: [8086:2829] type 0 class 0x000106
[ 0.432285] pci 0000:00:0d.0: reg 10: [io 0xd060-0xd067]
[ 0.440252] pci 0000:00:0d.0: reg 18: [io 0xd070-0xd077]
[ 0.444431] pci 0000:00:0d.0: reg 20: [io 0xd080-0xd08f]
[ 0.448447] pci 0000:00:0d.0: reg 24: [mem 0xf0406000-0xf0407fff]
[ 0.453161] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.454249] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[ 0.460028] ACPI: PCI Interrupt Link [LNKA] (IRQs *5 9 10 11)
[ 0.460448] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 10 *11)
[ 0.460566] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 *10 11)
[ 0.460681] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *9 10 11)
[ 0.461127] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.461127] vgaarb: loaded
[ 0.461127] vgaarb: bridge control possible 0000:00:02.0
[ 0.461127] i2c-core: driver [aat2870] using legacy suspend method
[ 0.461127] i2c-core: driver [aat2870] using legacy resume method
[ 0.461127] SCSI subsystem initialized
[ 0.461127] libata version 3.00 loaded.
[ 0.461127] usbcore: registered new interface driver usbfs
[ 0.461127] usbcore: registered new interface driver hub
[ 0.461127] usbcore: registered new device driver usb
[ 0.461127] PCI: Using ACPI for IRQ routing
[ 0.461127] PCI: pci_cache_line_size set to 64 bytes
[ 0.461127] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.461127] reserve RAM buffer: 00000000dfff0000 - 00000000dfffffff
[ 0.461127] NetLabel: Initializing
[ 0.461127] NetLabel: domain hash size = 128
[ 0.461127] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.461127] NetLabel: unlabeled traffic allowed by default
[ 0.469329] AppArmor: AppArmor Filesystem Enabled
[ 0.469352] pnp: PnP ACPI init
[ 0.469365] ACPI: bus type pnp registered
[ 0.469424] pnp 00:00: [bus 00-ff]
[ 0.469425] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.469427] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.469428] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.469431] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.469432] pnp 00:00: [mem 0xe0000000-0xffdfffff window]
[ 0.469454] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.469465] pnp 00:01: [io 0x0060]
[ 0.469466] pnp 00:01: [io 0x0064]
[ 0.469492] pnp 00:01: [irq 1]
[ 0.469507] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.469513] pnp 00:02: [io 0x0000-0x000f]
[ 0.469514] pnp 00:02: [io 0x0080-0x008f]
[ 0.469515] pnp 00:02: [io 0x00c0-0x00df]
[ 0.469516] pnp 00:02: [dma 4]
[ 0.469527] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.469569] pnp 00:03: [irq 12]
[ 0.469584] pnp 00:03: Plug and Play ACPI device, IDs PNP0f03 (active)
[ 0.469593] pnp 00:04: [io 0x0378-0x037f]
[ 0.469594] pnp 00:04: [io 0x0778-0x077f]
[ 0.469612] pnp 00:04: [irq 7]
[ 0.469626] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.469954] pnp: PnP ACPI: found 5 devices
[ 0.469956] ACPI: ACPI bus type pnp unregistered
[ 0.479843] Switching to clocksource acpi_pm
[ 0.479942] PCI: max bus depth: 0 pci_try_num: 1
[ 0.479960] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.479964] pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff]
[ 0.479989] NET: Registered protocol family 2
[ 0.479989] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.479989] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.479989] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.479989] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.479989] TCP reno registered
[ 0.479989] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.479989] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.479989] NET: Registered protocol family 1
[ 0.479989] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.479989] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.479989] pci 0000:00:02.0: Boot video device
[ 0.479989] pci 0000:00:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 0.536224] pci 0000:00:06.0: PCI INT A disabled
[ 0.536281] pci 0000:00:0b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.536419] pci 0000:00:0b.0: PCI INT A disabled
[ 0.536438] PCI: CLS 64 bytes, default 64
[ 0.536440] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.536442] Placing 64MB software IO TLB between ffff8800dbfea000 - ffff8800dffea000
[ 0.536445] software IO TLB at phys 0xdbfea000 - 0xdffea000
[ 0.536534] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 0.537218] audit: initializing netlink socket (disabled)
[ 0.537228] type=2000 audit(1334831321.536:1): initialized
[ 0.559691] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.569424] VFS: Disk quotas dquot_6.5.2
[ 0.569466] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.570011] fuse init (API version 7.17)
[ 0.570131] msgmni has been set to 7875
[ 0.571849] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.571976] io scheduler noop registered
[ 0.571979] io scheduler deadline registered
[ 0.572009] io scheduler cfq registered (default)
[ 0.572158] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.572176] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.572258] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.572298] ACPI: AC Adapter [AC] (on-line)
[ 0.572375] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.572380] ACPI: Power Button [PWRF]
[ 0.572433] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
[ 0.572437] ACPI: Sleep Button [SLPF]
[ 0.573452] ERST: Table is not found!
[ 0.573454] GHES: HEST is not enabled!
[ 0.573530] virtio-pci 0000:00:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.573727] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.605871] Freeing initrd memory: 13832k freed
[ 1.248951] Linux agpgart interface v0.103
[ 1.254544] brd: module loaded
[ 1.256947] loop: module loaded
[ 1.257314] ahci 0000:00:0d.0: version 3.0
[ 1.257415] ahci 0000:00:0d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 1.257633] ahci: SSS flag set, parallel bus scan disabled
[ 1.257942] ahci 0000:00:0d.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
[ 1.257951] ahci 0000:00:0d.0: flags: 64bit ncq stag only ccc
[ 1.258674] scsi0 : ahci
[ 1.258767] ata1: SATA max UDMA/133 abar m8192 at 0xf0406000 port 0xf0406100 irq 21
[ 1.258844] ata_piix 0000:00:01.1: version 2.13
[ 1.259824] scsi1 : ata_piix
[ 1.260317] scsi2 : ata_piix
[ 1.260374] ata2: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
[ 1.260380] ata3: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
[ 1.260804] Fixed MDIO Bus: probed
[ 1.260817] tun: Universal TUN/TAP device driver, 1.6
[ 1.260818] tun: (C) 1999-2004 Max Krasnyansky <maxk at qualcomm.com>
[ 1.261638] PPP generic driver version 2.4.2
[ 1.262079] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.262122] ehci_hcd 0000:00:0b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.262195] ehci_hcd 0000:00:0b.0: EHCI Host Controller
[ 1.262430] ehci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
[ 1.262761] ehci_hcd 0000:00:0b.0: irq 19, io mem 0xf0405000
[ 1.272188] ehci_hcd 0000:00:0b.0: USB 2.0 started, EHCI 1.00
[ 1.272644] hub 1-0:1.0: USB hub found
[ 1.272654] hub 1-0:1.0: 8 ports detected
[ 1.272827] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.272898] ohci_hcd 0000:00:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.272984] ohci_hcd 0000:00:06.0: OHCI Host Controller
[ 1.273269] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 2
[ 1.273417] ohci_hcd 0000:00:06.0: irq 22, io mem 0xf0404000
[ 1.329002] hub 2-0:1.0: USB hub found
[ 1.329032] hub 2-0:1.0: 8 ports detected
[ 1.329525] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.329601] usbcore: registered new interface driver libusual
[ 1.329655] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.330733] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.330748] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.331290] mousedev: PS/2 mouse device common for all mice
[ 1.332223] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.332913] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 1.333075] rtc0: alarms up to one day, 114 bytes nvram
[ 1.333222] device-mapper: uevent: version 1.0.3
[ 1.333528] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel at redhat.com
[ 1.333559] cpuidle: using governor ladder
[ 1.333563] cpuidle: using governor menu
[ 1.333567] EFI Variables Facility v0.08 2004-May-17
[ 1.333859] TCP cubic registered
[ 1.334011] NET: Registered protocol family 10
[ 1.334802] NET: Registered protocol family 17
[ 1.334835] Registering the dns_resolver key type
[ 1.335954] PM: Hibernation image not present or could not be loaded.
[ 1.335973] registered taskstats version 1
[ 1.360349] Magic number: 8:400:477
[ 1.360600] rtc_cmos rtc_cmos: setting system clock to 2012-04-19 10:28:43 UTC (1334831323)
[ 1.360808] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.360813] EDD information not available.
[ 1.417071] ata3.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
[ 1.418236] ata3.00: configured for UDMA/33
[ 1.576294] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.576442] ata1.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
[ 1.576449] ata1.00: 16777216 sectors, multi 128: LBA48 NCQ (depth 31/32)
[ 1.576637] ata1.00: configured for UDMA/133
[ 1.577145] scsi 0:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
[ 1.577596] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.577628] sd 0:0:0:0: [sda] 16777216 512-byte logical blocks: (8.58 GB/8.00 GiB)
[ 1.578323] sd 0:0:0:0: [sda] Write Protect is off
[ 1.578332] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.578580] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.578765] scsi 2:0:0:0: CD-ROM VBOX CD-ROM 1.0 PQ: 0 ANSI: 5
[ 1.579836] sr0: scsi3-mmc drive: 32x/32x xa/form2 tray
[ 1.579853] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.580258] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.580557] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 1.581366] sda: sda1 sda2 < sda5 >
[ 1.583094] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.584231] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 1.585305] Freeing unused kernel memory: 920k freed
[ 1.585472] Write protecting the kernel read-only data: 12288k
[ 1.593051] Freeing unused kernel memory: 1608k freed
[ 1.599031] Freeing unused kernel memory: 1196k freed
[ 1.637534] udevd[101]: starting version 175
[ 1.771768] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.874977] hrtimer: interrupt took 107977688 ns
[ 2.224241] usb 2-1: new full-speed USB device number 2 using ohci_hcd
[ 4.998829] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5.015680] udevd[296]: starting version 175
[ 5.046608] Adding 4192252k swap on /dev/sda5. Priority:-1 extents:1 across:4192252k
[ 5.084794] piix4_smbus 0000:00:07.0: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr
[ 5.090614] lp: driver loaded but no devices found
[ 5.096851] type=1400 audit(1334831327.232:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=359 comm="apparmor_parser"
[ 5.097421] type=1400 audit(1334831327.232:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=359 comm="apparmor_parser"
[ 5.097656] type=1400 audit(1334831327.232:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=359 comm="apparmor_parser"
[ 5.142805] pci 0000:00:04.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 5.148416] input: M-Audio Fast Track C400 as /devices/pci0000:00/0000:00:0b.0/usb1/1-1/1-1:1.5/input/input3
[ 5.150294] input: Unspecified device as /devices/virtual/input/input4
[ 5.151404] vboxguest: major 0, IRQ 20, I/O port d040, MMIO at 00000000f0000000 (size 0x400000)
[ 5.151407] vboxguest: Successfully loaded version 4.1.12 (interface 0x00010004)
[ 5.153200] generic-usb 0003:0763:2030.0001: input,hidraw0: USB HID v1.10 Keyboard [M-Audio Fast Track C400] on usb-0000:00:0b.0-1/input5
[ 5.154104] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input5
[ 5.173055] parport_pc 00:04: reported by Plug and Play ACPI
[ 5.176070] input: VirtualBox USB Tablet as /devices/pci0000:00/0000:00:06.0/usb2/2-1/2-1:1.0/input/input6
[ 5.176363] generic-usb 0003:80EE:0021.0002: input,hidraw1: USB HID v1.10 Mouse [VirtualBox USB Tablet] on usb-0000:00:06.0-1/input0
[ 5.176376] usbcore: registered new interface driver usbhid
[ 5.176377] usbhid: USB HID core driver
[ 5.193484] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 5.197201] ppdev: user-space parallel port driver
[ 5.284929] snd-usb-audio: probe of 1-1:1.1 failed with error -5
[ 5.290898] snd-usb-audio: probe of 1-1:1.2 failed with error -5
[ 5.296928] snd-usb-audio: probe of 1-1:1.3 failed with error -5
[ 5.303749] usbcore: registered new interface driver snd-usb-audio
[ 5.568497] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 5.568501] vesafb: scrolling: redraw
[ 5.568505] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 5.568573] mtrr: your processor doesn't support write-combining
[ 5.568906] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90003f00000, using 1216k, total 1216k
[ 5.569237] Console: switching to colour frame buffer device 80x30
[ 5.573612] fb0: VESA VGA frame buffer device
[ 7.628873] init: failsafe main process (676) killed by TERM signal
[ 7.686842] type=1400 audit(1334831329.820:5): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=856 comm="apparmor_parser"
[ 7.686955] type=1400 audit(1334831329.820:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=854 comm="apparmor_parser"
[ 7.687523] type=1400 audit(1334831329.820:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=854 comm="apparmor_parser"
[ 7.687836] type=1400 audit(1334831329.820:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=854 comm="apparmor_parser"
[ 7.881629] vboxsf: Successfully loaded version 4.1.12 (interface 0x00010004)
[ 15.552201] eth0: no IPv6 routers present
More information about the Alsa-devel
mailing list