[alsa-devel] [PATCH 2/2] ALSA: snd-usb-caiaq: Add support for Maschine
William Light
alsa-dev at wrl.illest.net
Mon Oct 10 17:54:23 CEST 2011
From: William Light <wrl at illest.net>
This adds partial support for the Maschine controller by Native Instruments.
Supported now are the 1x1 MIDI interface and the 41 buttons, 11 endless
rotary encoders, and 16 pressure-sensitive drum pads. Still to work on are the
dimmable LEDs and the two monochrome screens.
Signed-off-by: William Light <wrl at illest.net>
---
sound/usb/Kconfig | 2 +
sound/usb/caiaq/device.c | 8 ++-
sound/usb/caiaq/device.h | 1 +
sound/usb/caiaq/input.c | 151 +++++++++++++++++++++++++++++++++++++++++++++-
4 files changed, 160 insertions(+), 2 deletions(-)
diff --git a/sound/usb/Kconfig b/sound/usb/Kconfig
index 8beb775..3efc21c 100644
--- a/sound/usb/Kconfig
+++ b/sound/usb/Kconfig
@@ -67,6 +67,7 @@ config SND_USB_CAIAQ
* Native Instruments Guitar Rig mobile
* Native Instruments Traktor Kontrol X1
* Native Instruments Traktor Kontrol S4
+ * Native Instruments Maschine Controller
To compile this driver as a module, choose M here: the module
will be called snd-usb-caiaq.
@@ -85,6 +86,7 @@ config SND_USB_CAIAQ_INPUT
* Native Instruments Kore Controller 2
* Native Instruments Audio Kontrol 1
* Native Instruments Traktor Kontrol S4
+ * Native Instruments Maschine Controller
config SND_USB_US122L
tristate "Tascam US-122L USB driver"
diff --git a/sound/usb/caiaq/device.c b/sound/usb/caiaq/device.c
index 45bc4a2..3eb605b 100644
--- a/sound/usb/caiaq/device.c
+++ b/sound/usb/caiaq/device.c
@@ -50,7 +50,8 @@ MODULE_SUPPORTED_DEVICE("{{Native Instruments, RigKontrol2},"
"{Native Instruments, Session I/O},"
"{Native Instruments, GuitarRig mobile}"
"{Native Instruments, Traktor Kontrol X1}"
- "{Native Instruments, Traktor Kontrol S4}");
+ "{Native Instruments, Traktor Kontrol S4}"
+ "{Native Instruments, Maschine Controller}");
static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-max */
static char* id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* Id for this card */
@@ -146,6 +147,11 @@ static struct usb_device_id snd_usb_id_table[] = {
.idVendor = USB_VID_NATIVEINSTRUMENTS,
.idProduct = USB_PID_TRAKTORAUDIO2
},
+ {
+ .match_flags = USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = USB_VID_NATIVEINSTRUMENTS,
+ .idProduct = USB_PID_MASCHINECONTROLLER
+ },
{ /* terminator */ }
};
diff --git a/sound/usb/caiaq/device.h b/sound/usb/caiaq/device.h
index 3f9c633..562b0bf 100644
--- a/sound/usb/caiaq/device.h
+++ b/sound/usb/caiaq/device.h
@@ -18,6 +18,7 @@
#define USB_PID_TRAKTORKONTROLX1 0x2305
#define USB_PID_TRAKTORKONTROLS4 0xbaff
#define USB_PID_TRAKTORAUDIO2 0x041d
+#define USB_PID_MASCHINECONTROLLER 0x0808
#define EP1_BUFSIZE 64
#define EP4_BUFSIZE 512
diff --git a/sound/usb/caiaq/input.c b/sound/usb/caiaq/input.c
index 9efb92e..26a121b 100644
--- a/sound/usb/caiaq/input.c
+++ b/sound/usb/caiaq/input.c
@@ -67,6 +67,61 @@ static unsigned short keycode_kore[] = {
KEY_BRL_DOT5
};
+#define MASCHINE_BUTTONS (42)
+#define MASCHINE_BUTTON(X) ((X) + BTN_MISC)
+#define MASCHINE_PADS (16)
+#define MASCHINE_PAD(X) ((X) + ABS_PRESSURE)
+
+static unsigned short keycode_maschine[] = {
+ MASCHINE_BUTTON(40), /* mute */
+ MASCHINE_BUTTON(39), /* solo */
+ MASCHINE_BUTTON(38), /* select */
+ MASCHINE_BUTTON(37), /* duplicate */
+ MASCHINE_BUTTON(36), /* navigate */
+ MASCHINE_BUTTON(35), /* pad mode */
+ MASCHINE_BUTTON(34), /* pattern */
+ MASCHINE_BUTTON(33), /* scene */
+ KEY_RESERVED, /* spacer */
+
+ MASCHINE_BUTTON(30), /* rec */
+ MASCHINE_BUTTON(31), /* erase */
+ MASCHINE_BUTTON(32), /* shift */
+ MASCHINE_BUTTON(28), /* grid */
+ MASCHINE_BUTTON(27), /* > */
+ MASCHINE_BUTTON(26), /* < */
+ MASCHINE_BUTTON(25), /* restart */
+
+ MASCHINE_BUTTON(21), /* E */
+ MASCHINE_BUTTON(22), /* F */
+ MASCHINE_BUTTON(23), /* G */
+ MASCHINE_BUTTON(24), /* H */
+ MASCHINE_BUTTON(20), /* D */
+ MASCHINE_BUTTON(19), /* C */
+ MASCHINE_BUTTON(18), /* B */
+ MASCHINE_BUTTON(17), /* A */
+
+ MASCHINE_BUTTON(0), /* control */
+ MASCHINE_BUTTON(2), /* browse */
+ MASCHINE_BUTTON(4), /* < */
+ MASCHINE_BUTTON(6), /* snap */
+ MASCHINE_BUTTON(7), /* autowrite */
+ MASCHINE_BUTTON(5), /* > */
+ MASCHINE_BUTTON(3), /* sampling */
+ MASCHINE_BUTTON(1), /* step */
+
+ MASCHINE_BUTTON(15), /* 8 softkeys */
+ MASCHINE_BUTTON(14),
+ MASCHINE_BUTTON(13),
+ MASCHINE_BUTTON(12),
+ MASCHINE_BUTTON(11),
+ MASCHINE_BUTTON(10),
+ MASCHINE_BUTTON(9),
+ MASCHINE_BUTTON(8),
+
+ MASCHINE_BUTTON(16), /* note repeat */
+ MASCHINE_BUTTON(29) /* play */
+};
+
#define KONTROLX1_INPUTS (40)
#define KONTROLS4_BUTTONS (12 * 8)
#define KONTROLS4_AXIS (46)
@@ -218,6 +273,29 @@ static void snd_caiaq_input_read_erp(struct snd_usb_caiaqdev *dev,
input_report_abs(input_dev, ABS_HAT3Y, i);
input_sync(input_dev);
break;
+
+ case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_MASCHINECONTROLLER):
+ /* 4 under the left screen */
+ input_report_abs(input_dev, ABS_HAT0X, decode_erp(buf[21], buf[20]));
+ input_report_abs(input_dev, ABS_HAT0Y, decode_erp(buf[15], buf[14]));
+ input_report_abs(input_dev, ABS_HAT1X, decode_erp(buf[9], buf[8]));
+ input_report_abs(input_dev, ABS_HAT1Y, decode_erp(buf[3], buf[2]));
+
+ /* 4 under the right screen */
+ input_report_abs(input_dev, ABS_HAT2X, decode_erp(buf[19], buf[18]));
+ input_report_abs(input_dev, ABS_HAT2Y, decode_erp(buf[13], buf[12]));
+ input_report_abs(input_dev, ABS_HAT3X, decode_erp(buf[7], buf[6]));
+ input_report_abs(input_dev, ABS_HAT3Y, decode_erp(buf[1], buf[0]));
+
+ /* volume */
+ input_report_abs(input_dev, ABS_RX, decode_erp(buf[17], buf[16]));
+ /* tempo */
+ input_report_abs(input_dev, ABS_RY, decode_erp(buf[11], buf[10]));
+ /* swing */
+ input_report_abs(input_dev, ABS_RZ, decode_erp(buf[5], buf[4]));
+
+ input_sync(input_dev);
+ break;
}
}
@@ -400,6 +478,25 @@ static void snd_usb_caiaq_tks4_dispatch(struct snd_usb_caiaqdev *dev,
input_sync(dev->input_dev);
}
+#define MASCHINE_MSGBLOCK_SIZE 2
+
+static void snd_usb_caiaq_maschine_dispatch(struct snd_usb_caiaqdev *dev,
+ const unsigned char *buf,
+ unsigned int len)
+{
+ unsigned int i, pad_id;
+ uint16_t pressure;
+
+ for (i = 0; i < MASCHINE_PADS; i++) {
+ pressure = be16_to_cpu(buf[i * 2] << 8 | buf[(i * 2) + 1]);
+ pad_id = pressure >> 12;
+
+ input_report_abs(dev->input_dev, MASCHINE_PAD(pad_id), pressure & 0xfff);
+ }
+
+ input_sync(dev->input_dev);
+}
+
static void snd_usb_caiaq_ep4_reply_dispatch(struct urb *urb)
{
struct snd_usb_caiaqdev *dev = urb->context;
@@ -425,6 +522,13 @@ static void snd_usb_caiaq_ep4_reply_dispatch(struct urb *urb)
case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_TRAKTORKONTROLS4):
snd_usb_caiaq_tks4_dispatch(dev, buf, urb->actual_length);
break;
+
+ case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_MASCHINECONTROLLER):
+ if (urb->actual_length < (MASCHINE_PADS * MASCHINE_MSGBLOCK_SIZE))
+ goto requeue;
+
+ snd_usb_caiaq_maschine_dispatch(dev, buf, urb->actual_length);
+ break;
}
requeue:
@@ -444,6 +548,7 @@ static int snd_usb_caiaq_input_open(struct input_dev *idev)
switch (dev->chip.usb_id) {
case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_TRAKTORKONTROLX1):
case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_TRAKTORKONTROLS4):
+ case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_MASCHINECONTROLLER):
if (usb_submit_urb(dev->ep4_in_urb, GFP_KERNEL) != 0)
return -EIO;
break;
@@ -462,6 +567,7 @@ static void snd_usb_caiaq_input_close(struct input_dev *idev)
switch (dev->chip.usb_id) {
case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_TRAKTORKONTROLX1):
case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_TRAKTORKONTROLS4):
+ case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_MASCHINECONTROLLER):
usb_kill_urb(dev->ep4_in_urb);
break;
}
@@ -652,6 +758,50 @@ int snd_usb_caiaq_input_init(struct snd_usb_caiaqdev *dev)
break;
+ case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_MASCHINECONTROLLER):
+ input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+ input->absbit[0] = BIT_MASK(ABS_HAT0X) | BIT_MASK(ABS_HAT0Y) |
+ BIT_MASK(ABS_HAT1X) | BIT_MASK(ABS_HAT1Y) |
+ BIT_MASK(ABS_HAT2X) | BIT_MASK(ABS_HAT2Y) |
+ BIT_MASK(ABS_HAT3X) | BIT_MASK(ABS_HAT3Y) |
+ BIT_MASK(ABS_RX) | BIT_MASK(ABS_RY) |
+ BIT_MASK(ABS_RZ);
+
+ BUILD_BUG_ON(sizeof(dev->keycode) < sizeof(keycode_maschine));
+ memcpy(dev->keycode, keycode_maschine, sizeof(keycode_maschine));
+ input->keycodemax = ARRAY_SIZE(keycode_maschine);
+
+ for (i = 0; i < MASCHINE_PADS; i++) {
+ input->absbit[0] |= MASCHINE_PAD(i);
+ input_set_abs_params(input, MASCHINE_PAD(i), 0, 0xfff, 5, 10);
+ }
+
+ input_set_abs_params(input, ABS_HAT0X, 0, 999, 0, 10);
+ input_set_abs_params(input, ABS_HAT0Y, 0, 999, 0, 10);
+ input_set_abs_params(input, ABS_HAT1X, 0, 999, 0, 10);
+ input_set_abs_params(input, ABS_HAT1Y, 0, 999, 0, 10);
+ input_set_abs_params(input, ABS_HAT2X, 0, 999, 0, 10);
+ input_set_abs_params(input, ABS_HAT2Y, 0, 999, 0, 10);
+ input_set_abs_params(input, ABS_HAT3X, 0, 999, 0, 10);
+ input_set_abs_params(input, ABS_HAT3Y, 0, 999, 0, 10);
+ input_set_abs_params(input, ABS_RX, 0, 999, 0, 10);
+ input_set_abs_params(input, ABS_RY, 0, 999, 0, 10);
+ input_set_abs_params(input, ABS_RZ, 0, 999, 0, 10);
+
+ dev->ep4_in_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!dev->ep4_in_urb) {
+ ret = -ENOMEM;
+ goto exit_free_idev;
+ }
+
+ usb_fill_bulk_urb(dev->ep4_in_urb, usb_dev,
+ usb_rcvbulkpipe(usb_dev, 0x4),
+ dev->ep4_in_buf, EP4_BUFSIZE,
+ snd_usb_caiaq_ep4_reply_dispatch, dev);
+
+ snd_usb_caiaq_set_auto_msg(dev, 1, 10, 5);
+ break;
+
default:
/* no input methods supported on this device */
goto exit_free_idev;
@@ -690,4 +840,3 @@ void snd_usb_caiaq_input_free(struct snd_usb_caiaqdev *dev)
input_unregister_device(dev->input_dev);
dev->input_dev = NULL;
}
-
--
1.7.6.1
More information about the Alsa-devel
mailing list