[alsa-devel] [PATCH v5 1/3] ARM: mxs: add saif clkmux functions

Dong Aisheng-B29396 B29396 at freescale.com
Fri Nov 18 07:28:48 CET 2011


> -----Original Message-----
> From: Marek Vasut [mailto:marek.vasut at gmail.com]
> Sent: Friday, November 18, 2011 12:55 PM
> To: alsa-devel at alsa-project.org
> Cc: Dong Aisheng-B29396; linux-arm-kernel at lists.infradead.org;
> s.hauer at pengutronix.de; broonie at opensource.wolfsonmicro.com;
> w.sang at pengutronix.de; kernel at pengutronix.de; u.kleine-
> koenig at pengutronix.de; lrg at ti.com; Guo Shawn-R65073
> Subject: Re: [alsa-devel] [PATCH v5 1/3] ARM: mxs: add saif clkmux
> functions
> 
> > Signed-off-by: Dong Aisheng <b29396 at freescale.com>
> > Cc: Sascha Hauer <s.hauer at pengutronix.de>
> > Cc: Wolfram Sang <w.sang at pengutronix.de>
> > Cc: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
> > Cc: Mark Brown <broonie at opensource.wolfsonmicro.com>
> > Cc: Liam Girdwood <lrg at ti.com>
> >
> > ---
> > changes since v4:
> >  * remove get_master_id function.
> >    Instead, we use master_mode and master_id in platform_data to tell
> >    saif driver the correct master id for each saifs.
> > changes since v3:
> >  * remove the unneeded locking according to Sascha changes since v2:
> >  * This patch is separated from the following patch based on
> >    suggestions from Uwe.
> >    [PATCH 2/3] ARM: mx28evk: add platform data for saif
> > ---
> >  arch/arm/mach-mxs/clock-mx28.c          |   29
> > +++++++++++++++++++++++++++++ arch/arm/mach-mxs/include/mach/common.h |
> > 1 +
> >  arch/arm/mach-mxs/include/mach/digctl.h |   21 +++++++++++++++++++++
> >  3 files changed, 51 insertions(+), 0 deletions(-)
> >
> > diff --git a/arch/arm/mach-mxs/clock-mx28.c
> > b/arch/arm/mach-mxs/clock-mx28.c index 7954013..c51fe85 100644
> > --- a/arch/arm/mach-mxs/clock-mx28.c
> > +++ b/arch/arm/mach-mxs/clock-mx28.c
> > @@ -22,6 +22,7 @@
> >  #include <linux/io.h>
> >  #include <linux/jiffies.h>
> >  #include <linux/clkdev.h>
> > +#include <linux/spinlock.h>
> >
> >  #include <asm/clkdev.h>
> >  #include <asm/div64.h>
> > @@ -29,6 +30,7 @@
> >  #include <mach/mx28.h>
> >  #include <mach/common.h>
> >  #include <mach/clock.h>
> > +#include <mach/digctl.h>
> >
> >  #include "regs-clkctrl-mx28.h"
> >
> > @@ -43,6 +45,33 @@ static struct clk emi_clk;  static struct clk
> > saif0_clk;  static struct clk saif1_clk;  static struct clk
> > clk32k_clk;
> > +static DEFINE_SPINLOCK(clkmux_lock);
> > +
> > +/*
> > + * HW_SAIF_CLKMUX_SEL:
> > + *  DIRECT(0x0): SAIF0 clock pins selected for SAIF0 input clocks,
> > +and
> > SAIF1 + *		clock pins selected for SAIF1 input clocks.
> > + *  CROSSINPUT(0x1): SAIF1 clock inputs selected for SAIF0 input
> > + clocks,
> > and + *		SAIF0 clock inputs selected for SAIF1 input clocks.
> > + *  EXTMSTR0(0x2): SAIF0 clock pin selected for both SAIF0 and SAIF1
> input
> > + *		clocks.
> > + *  EXTMSTR1(0x3): SAIF1 clock pin selected for both SAIF0 and SAIF1
> input
> > + *		clocks.
> > + */
> > +int mxs_saif_clkmux_select(unsigned int clkmux) {
> > +	if (clkmux > 0x3)
> > +		return -EINVAL;
> > +
> > +	spin_lock(&clkmux_lock);
> > +	__raw_writel(BM_DIGCTL_CTRL_SAIF_CLKMUX,
> > +			DIGCTRL_BASE_ADDR + HW_DIGCTL_CTRL + MXS_CLR_ADDR);
> > +	__raw_writel(clkmux << BP_DIGCTL_CTRL_SAIF_CLKMUX,
> > +			DIGCTRL_BASE_ADDR + HW_DIGCTL_CTRL + MXS_SET_ADDR);
> > +	spin_unlock(&clkmux_lock);
> > +
> > +	return 0;
> > +}
> >
> >  static int _raw_clk_enable(struct clk *clk)  { diff --git
> > a/arch/arm/mach-mxs/include/mach/common.h
> > b/arch/arm/mach-mxs/include/mach/common.h index 635bb5d..3bbb94f
> > 100644
> > --- a/arch/arm/mach-mxs/include/mach/common.h
> > +++ b/arch/arm/mach-mxs/include/mach/common.h
> > @@ -16,6 +16,7 @@ struct clk;
> >  extern const u32 *mxs_get_ocotp(void);  extern int
> > mxs_reset_block(void __iomem *);  extern void mxs_timer_init(struct
> > clk *, int);
> > +extern int mxs_saif_clkmux_select(unsigned int clkmux);
> >
> >  extern int mx23_register_gpios(void);  extern int
> > mx23_clocks_init(void); diff --git
> > a/arch/arm/mach-mxs/include/mach/digctl.h
> > b/arch/arm/mach-mxs/include/mach/digctl.h new file mode 100644 index
> > 0000000..9bd0496
> > --- /dev/null
> > +++ b/arch/arm/mach-mxs/include/mach/digctl.h
> > @@ -0,0 +1,21 @@
> > +/*
> > + * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
> > + *
> > + * This program is free software; you can redistribute it and/or
> > +modify
> > + * it under the terms of the GNU General Public License version 2 as
> > + * published by the Free Software Foundation.
> > + */
> > +
> > +#ifndef __MACH_DIGCTL_H__
> > +#define __MACH_DIGCTL_H__
> > +
> > +/* MXS DIGCTL SAIF CLKMUX */
> > +#define MXS_DIGCTL_SAIF_CLKMUX_DIRECT		0x0
> > +#define MXS_DIGCTL_SAIF_CLKMUX_CROSSINPUT	0x1
> > +#define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0		0x2
> > +#define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR1		0x3
> > +
> > +#define HW_DIGCTL_CTRL			0x0
> > +#define  BP_DIGCTL_CTRL_SAIF_CLKMUX	(10)
> 
> Do you need the parenthesis above ?
> 
I'm not sure about his.
HW_DIGCTL_CTRL is the register offset.
Do we have to do this?

> > +#define  BM_DIGCTL_CTRL_SAIF_CLKMUX	(0x3 << 10)
> > +#endif
> 
> Please add my
> 
> Reviewed-by: Marek Vasut <marek.vasut at gmail.com>

Thanks for the review.

Regards
Dong Aisheng



More information about the Alsa-devel mailing list