[alsa-devel] [PATCH v4 1/3] ARM: mxs: add saif clkmux functions

Shawn Guo shawn.guo at freescale.com
Fri Nov 11 08:14:02 CET 2011


On Thu, Nov 10, 2011 at 02:42:11PM +0800, Dong Aisheng wrote:
> Signed-off-by: Dong Aisheng <b29396 at freescale.com>
> Cc: Sascha Hauer <s.hauer at pengutronix.de>
> Cc: Wolfram Sang <w.sang at pengutronix.de>
> Cc: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
> Cc: Mark Brown <broonie at opensource.wolfsonmicro.com>
> Cc: Liam Girdwood <lrg at ti.com>
> 
> ---
> changes since v3:
>  * remove the unneeded locking according to Sascha
> changes since v2:
>  * This patch is separated from the following patch based on
>    suggestions from Uwe.
>    [PATCH 2/3] ARM: mx28evk: add platform data for saif
> ---
>  arch/arm/mach-mxs/clock-mx28.c          |   56 +++++++++++++++++++++++++++++++
>  arch/arm/mach-mxs/include/mach/digctl.h |   21 +++++++++++
>  2 files changed, 77 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c
> index 7954013..6522d5f 100644
> --- a/arch/arm/mach-mxs/clock-mx28.c
> +++ b/arch/arm/mach-mxs/clock-mx28.c
> @@ -22,6 +22,7 @@
>  #include <linux/io.h>
>  #include <linux/jiffies.h>
>  #include <linux/clkdev.h>
> +#include <linux/spinlock.h>
>  
>  #include <asm/clkdev.h>
>  #include <asm/div64.h>
> @@ -29,6 +30,7 @@
>  #include <mach/mx28.h>
>  #include <mach/common.h>
>  #include <mach/clock.h>
> +#include <mach/digctl.h>
>  
>  #include "regs-clkctrl-mx28.h"
>  
> @@ -43,6 +45,60 @@ static struct clk emi_clk;
>  static struct clk saif0_clk;
>  static struct clk saif1_clk;
>  static struct clk clk32k_clk;
> +static DEFINE_SPINLOCK(clkmux_lock);
> +
> +/*
> + * HW_SAIF_CLKMUX_SEL:
> + *  DIRECT(0x0): SAIF0 clock pins selected for SAIF0 input clocks, and SAIF1
> + *		clock pins selected for SAIF1 input clocks.
> + *  CROSSINPUT(0x1): SAIF1 clock inputs selected for SAIF0 input clocks, and
> + *		SAIF0 clock inputs selected for SAIF1 input clocks.
> + *  EXTMSTR0(0x2): SAIF0 clock pin selected for both SAIF0 and SAIF1 input
> + *		clocks.
> + *  EXTMSTR1(0x3): SAIF1 clock pin selected for both SAIF0 and SAIF1 input
> + *		clocks.
> + */
> +int mxs_saif_clkmux_select(unsigned int clkmux)
> +{
> +	if (clkmux > 0x3)
> +		return -EINVAL;
> +
> +	spin_lock(&clkmux_lock);
> +	__raw_writel(BM_DIGCTL_CTRL_SAIF_CLKMUX,
> +			DIGCTRL_BASE_ADDR + HW_DIGCTL_CTRL + MXS_CLR_ADDR);
> +	__raw_writel(clkmux << BP_DIGCTL_CTRL_SAIF_CLKMUX,
> +			DIGCTRL_BASE_ADDR + HW_DIGCTL_CTRL + MXS_SET_ADDR);
> +	spin_unlock(&clkmux_lock);
> +
> +	return 0;
> +}
> +
> +int mxs_get_saif_clk_master_id(unsigned int saif_id)
> +{
> +	unsigned int saif_clkmux;
> +	unsigned int master_id;
> +
> +	saif_clkmux = (__raw_readl(DIGCTRL_BASE_ADDR + HW_DIGCTL_CTRL)
> +			&& BM_DIGCTL_CTRL_SAIF_CLKMUX) >> BP_DIGCTL_CTRL_SAIF_CLKMUX;
> +	switch (saif_clkmux) {
> +	case MXS_DIGCTL_SAIF_CLKMUX_DIRECT:
> +		master_id = saif_id;
> +		break;
> +	case MXS_DIGCTL_SAIF_CLKMUX_CROSSINPUT:
> +		master_id = saif_id ? 0 : 1;
> +		break;
> +	case MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0:
> +		master_id = 0;
> +		break;
> +	case MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR1:
> +		master_id = 1;
> +		break;
> +	default:
> +		return -EINVAL;
> +	}
> +
> +	return master_id;
> +}
>  

I'm not completely comfortable to have these DIGCTL setup in clock code.
What about creating a digctl.c for all DIGCTL stuff?

>  static int _raw_clk_enable(struct clk *clk)
>  {
> diff --git a/arch/arm/mach-mxs/include/mach/digctl.h b/arch/arm/mach-mxs/include/mach/digctl.h
> new file mode 100644
> index 0000000..9bd0496
> --- /dev/null
> +++ b/arch/arm/mach-mxs/include/mach/digctl.h
> @@ -0,0 +1,21 @@
> +/*
> + * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#ifndef __MACH_DIGCTL_H__
> +#define __MACH_DIGCTL_H__
> +
> +/* MXS DIGCTL SAIF CLKMUX */
> +#define MXS_DIGCTL_SAIF_CLKMUX_DIRECT		0x0
> +#define MXS_DIGCTL_SAIF_CLKMUX_CROSSINPUT	0x1
> +#define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0		0x2
> +#define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR1		0x3
> +
> +#define HW_DIGCTL_CTRL			0x0
> +#define  BP_DIGCTL_CTRL_SAIF_CLKMUX	(10)
> +#define  BM_DIGCTL_CTRL_SAIF_CLKMUX	(0x3 << 10)
> +#endif
> 

And if possible, we should try to make these definitions local to
that digctl.c.

-- 
Regards,
Shawn



More information about the Alsa-devel mailing list