[alsa-devel] Clevo P170HM / Sager NP8170 audio

[Julian Sikorski]

W dniu 20.08.2011 09:33, Andrew Mahone pisze:
> This laptop is detected as ALC892 audio (and by the codec ID this
> seems to be valid), but none of the configurations for it quite match
> this device. I've been working on documenting the connections with HDA
> Analyzer.
> 
> alsa-info output:
> http://www.alsa-project.org/db/?f=b86e4c6447867fbd129a36d8a63e2f5caa836c52
> 
> The laptop has built-in 5.1, and 5.1 or 7.1 output via jacks.
> 
> DAC NIDs:
> 0x02 front
> 0x03 rear
> 0x04 clfe
> 0x05 side
> 
> internal mixers:
> 0x0c front
> 0x0d rear
> 0x0e clfe
> 0x0f side
> 
> internal speaker pins:
> 0x14 front
> 0x15 "rear" (front of laptop)
> 0x16 clfe
> 
> external ports:
> fixed route:
> 0x17 side
> 
> can select any output:
> 0x18 mic / output
> 0x1a line-in / output
> 0x1b headphone
> 
> I've been experimenting with patch_realtek.c to add the extra DAC NID,
> and have had some success with a 6-channel mode for the built-in
> speakers and an 8-channel mode that mutes all internal speakers and
> sets the jacks up for output. I still need to manually connect pins
> 0x18, 0x1a, 0x1b to the correct internal mixers for 7.1 to work, and
> headphone plugin does not mute internal speakers in 5.1 mode. I have
> not added a plain stereo mode for internal speakers, although it
> appears that i can probably configure the codec to mix the front
> channels to center and LFE.
> 
> Are there any suggestions for what to do next? My current state as a
> patch against the linux-3.0.y repository is at
> http://pastie.org/2400649
> 
Please check out this thread:
http://thread.gmane.org/gmane.linux.alsa.devel/86475
With linux-3.1, everything apart from 8-channel sound seems to work with
autoparser, and I was able to get the sound going out from the analog
part of the spdif jack by fiddling with hda-analyzer:
http://article.gmane.org/gmane.linux.alsa.devel/87235
To get this to work automatically, code needs to be written but this is
beyond my skillset.

Julian