[alsa-devel] X-Fi Surround 5.1 USB Remote Control LIRC config file

[roiman at rambler.ru]

Hi, all.

Here is content of LIRC config file lircd.conf with IR-codes for X-Fi
Surround 5.1 USB remote control.

All buttons (include volume knob) works fine with Alsa driver 1.0.24
and LIRC 0.9.0.

Wiki-page
(http://alsa.opensrc.org/Usb-audio#Creative_USB_X-Fi_Surround_5.1) for
this card presents information about button codes only for volume knob
on this card. Because of this information may be useful, I think.

Thanks, guys, for your work.

Roman.

-----------------------------------------------
-----------------------------------------------
begin remote

	name	X-F.Surround-5.1.Remote.Control
	bits	8
	gap 300000

	begin codes
		knob-mute	0x0d
		knob-vol-	0x0f
		knob-vol+	0x10
		power		0x29
		mute		0x2a
		vol+		0x2b
		vol-		0x2c
		menu-back	0x2d
		display		0x2e
		play-pause	0x2f
		ok		0x30
		up		0x31
		down		0x32
		prev		0x33
		next		0x34
		cmss3d-on	0x37
		cmss3d-off	0x38
		cryst-on	0x39
		cryst-off	0x3a
		shuffle		0x3b
		repeat		0x3c
	end codes

end remote
-----------------------------------------------
-----------------------------------------------