[alsa-devel] [PATCH 2/4] ASoC: Refactor WM8958 DSP to support additional algorithms
Mark Brown
broonie at opensource.wolfsonmicro.com
Tue Mar 22 18:51:56 CET 2011
In preparation for the addition of additional WM8958 algorithms
reorganise the code to make it easier to add such support later.
Signed-off-by: Mark Brown <broonie at opensource.wolfsonmicro.com>
---
sound/soc/codecs/wm8958-dsp2.c | 98 +++++++++++++++++-----------------------
sound/soc/codecs/wm8994.h | 1 +
2 files changed, 43 insertions(+), 56 deletions(-)
diff --git a/sound/soc/codecs/wm8958-dsp2.c b/sound/soc/codecs/wm8958-dsp2.c
index 88fd4a9..9c1cbe5 100644
--- a/sound/soc/codecs/wm8958-dsp2.c
+++ b/sound/soc/codecs/wm8958-dsp2.c
@@ -189,7 +189,7 @@ ok:
return ret;
}
-static void wm8958_mbc_apply(struct snd_soc_codec *codec, int mbc, int start)
+static void wm8958_dsp_start_mbc(struct snd_soc_codec *codec, int path)
{
struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec);
struct wm8994_pdata *pdata = wm8994->pdata;
@@ -237,9 +237,9 @@ static void wm8958_dsp_apply(struct snd_soc_codec *codec, int path, int start)
{
struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec);
int pwr_reg = snd_soc_read(codec, WM8994_POWER_MANAGEMENT_5);
- int ena, reg, aif, i;
+ int ena, reg, aif;
- switch (mbc) {
+ switch (path) {
case 0:
pwr_reg &= (WM8994_AIF1DAC1L_ENA | WM8994_AIF1DAC1R_ENA);
aif = 0;
@@ -257,66 +257,34 @@ static void wm8958_dsp_apply(struct snd_soc_codec *codec, int path, int start)
return;
}
- /* We can only enable the MBC if the AIF is enabled and we
- * want it to be enabled. */
- ena = pwr_reg && wm8994->mbc_ena[mbc];
+ /* Do we have both an active AIF and an active algorithm? */
+ ena = wm8994->mbc_ena[path];
+ if (!pwr_reg)
+ ena = 0;
reg = snd_soc_read(codec, WM8958_DSP2_PROGRAM);
- dev_dbg(codec->dev, "MBC %d startup: %d, power: %x, DSP: %x\n",
- mbc, start, pwr_reg, reg);
+ dev_dbg(codec->dev, "DSP path %d %d startup: %d, power: %x, DSP: %x\n",
+ path, wm8994->dsp_active, start, pwr_reg, reg);
if (start && ena) {
- /* If the DSP is already running then noop */
- if (reg & WM8958_DSP2_ENA)
- return;
-
- /* If neither AIFnCLK is not yet enabled postpone */
+ /* If either AIFnCLK is not yet enabled postpone */
if (!(snd_soc_read(codec, WM8994_AIF1_CLOCKING_1)
& WM8994_AIF1CLK_ENA_MASK) &&
!(snd_soc_read(codec, WM8994_AIF2_CLOCKING_1)
& WM8994_AIF2CLK_ENA_MASK))
return;
- /* If we have MBC firmware download it */
- if (wm8994->mbc && wm8994->mbc_ena[mbc])
- wm8958_dsp2_fw(codec, "MBC", wm8994->mbc, false);
-
/* Switch the clock over to the appropriate AIF */
snd_soc_update_bits(codec, WM8994_CLOCKING_1,
WM8958_DSP2CLK_SRC | WM8958_DSP2CLK_ENA,
aif << WM8958_DSP2CLK_SRC_SHIFT |
WM8958_DSP2CLK_ENA);
- snd_soc_update_bits(codec, WM8958_DSP2_PROGRAM,
- WM8958_DSP2_ENA, WM8958_DSP2_ENA);
-
- /* If we've got user supplied MBC settings use them */
- if (pdata && pdata->num_mbc_cfgs) {
- struct wm8958_mbc_cfg *cfg
- = &pdata->mbc_cfgs[wm8994->mbc_cfg];
-
- for (i = 0; i < ARRAY_SIZE(cfg->coeff_regs); i++)
- snd_soc_write(codec, i + WM8958_MBC_BAND_1_K_1,
- cfg->coeff_regs[i]);
-
- for (i = 0; i < ARRAY_SIZE(cfg->cutoff_regs); i++)
- snd_soc_write(codec,
- i + WM8958_MBC_BAND_2_LOWER_CUTOFF_C1_1,
- cfg->cutoff_regs[i]);
- }
-
- /* Run the DSP */
- snd_soc_write(codec, WM8958_DSP2_EXECCONTROL,
- WM8958_DSP2_RUNR);
+ if (wm8994->mbc_ena[path])
+ wm8958_dsp_start_mbc(codec, path);
- /* And we're off! */
- snd_soc_update_bits(codec, WM8958_DSP2_CONFIG,
- WM8958_MBC_ENA | WM8958_MBC_SEL_MASK,
- mbc << WM8958_MBC_SEL_SHIFT |
- WM8958_MBC_ENA);
-
- dev_dbg(codec->dev, "MBC running\n");
+ dev_dbg(codec->dev, "DSP running\n");
} else {
/* If the DSP is already stopped then noop */
if (!(reg & WM8958_DSP2_ENA))
@@ -324,12 +292,16 @@ static void wm8958_dsp_apply(struct snd_soc_codec *codec, int path, int start)
snd_soc_update_bits(codec, WM8958_DSP2_CONFIG,
WM8958_MBC_ENA, 0);
+ snd_soc_write(codec, WM8958_DSP2_EXECCONTROL,
+ WM8958_DSP2_STOP);
snd_soc_update_bits(codec, WM8958_DSP2_PROGRAM,
WM8958_DSP2_ENA, 0);
snd_soc_update_bits(codec, WM8994_CLOCKING_1,
WM8958_DSP2CLK_ENA, 0);
- dev_dbg(codec->dev, "MBC stopped\n");
+ wm8994->dsp_active = -1;
+
+ dev_dbg(codec->dev, "DSP stopped\n");
}
}
@@ -343,18 +315,33 @@ int wm8958_aif_ev(struct snd_soc_dapm_widget *w,
case SND_SOC_DAPM_POST_PMU:
case SND_SOC_DAPM_PRE_PMU:
for (i = 0; i < 3; i++)
- wm8958_mbc_apply(codec, i, 1);
+ wm8958_dsp_apply(codec, i, 1);
break;
case SND_SOC_DAPM_POST_PMD:
case SND_SOC_DAPM_PRE_PMD:
for (i = 0; i < 3; i++)
- wm8958_mbc_apply(codec, i, 0);
+ wm8958_dsp_apply(codec, i, 0);
break;
}
return 0;
}
+/* Check if DSP2 is in use on another AIF */
+static int wm8958_dsp2_busy(struct wm8994_priv *wm8994, int aif)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(wm8994->mbc_ena); i++) {
+ if (i == aif)
+ continue;
+ if (wm8994->mbc_ena[i])
+ return 1;
+ }
+
+ return 0;
+}
+
static int wm8958_put_mbc_enum(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
@@ -414,23 +401,20 @@ static int wm8958_mbc_put(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
int mbc = kcontrol->private_value;
- int i;
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec);
if (ucontrol->value.integer.value[0] > 1)
return -EINVAL;
- for (i = 0; i < ARRAY_SIZE(wm8994->mbc_ena); i++) {
- if (mbc != i && wm8994->mbc_ena[i]) {
- dev_dbg(codec->dev, "MBC %d active already\n", mbc);
- return -EBUSY;
- }
+ if (wm8958_dsp2_busy(wm8994, mbc)) {
+ dev_dbg(codec->dev, "DSP2 active on %d already\n", mbc);
+ return -EBUSY;
}
wm8994->mbc_ena[mbc] = ucontrol->value.integer.value[0];
- wm8958_mbc_apply(codec, mbc, wm8994->mbc_ena[mbc]);
+ wm8958_dsp_apply(codec, mbc, wm8994->mbc_ena[mbc]);
return 0;
}
@@ -466,10 +450,12 @@ void wm8958_dsp2_init(struct snd_soc_codec *codec)
struct wm8994_pdata *pdata = wm8994->pdata;
int ret, i;
+ wm8994->dsp_active = -1;
+
snd_soc_add_controls(codec, wm8958_mbc_snd_controls,
ARRAY_SIZE(wm8958_mbc_snd_controls));
- /* We don't require firmware and don't want to delay boot */
+ /* We don't *require* firmware and don't want to delay boot */
request_firmware_nowait(THIS_MODULE, FW_ACTION_HOTPLUG,
"wm8958_mbc.wfw", codec->dev, GFP_KERNEL,
codec, wm8958_mbc_loaded);
diff --git a/sound/soc/codecs/wm8994.h b/sound/soc/codecs/wm8994.h
index 1aa365b..a4bfde8 100644
--- a/sound/soc/codecs/wm8994.h
+++ b/sound/soc/codecs/wm8994.h
@@ -116,6 +116,7 @@ struct wm8994_priv {
unsigned int aif1clk_disable:1;
unsigned int aif2clk_disable:1;
+ int dsp_active;
const struct firmware *cur_fw;
const struct firmware *mbc;
};
--
1.7.4.1
More information about the Alsa-devel
mailing list