[alsa-devel] [PATCH 1/3] ASoC: Add ADAV80x codec driver

[Lars-Peter Clausen]

On 06/23/2011 02:34 PM, Liam Girdwood wrote:
> On 23/06/11 07:00, Lars-Peter Clausen wrote:
>> This patch adds support for the Analog Devices ADAV801 and ADAV803 audio codec.
>>
>> Signed-off-by: Lars-Peter Clausen <lars at metafoo.de>
>>
>> ---
>> Changes since v1:
>> * Sync register on resume
>> * Don't use arrays for the mux enums and controls
>> * Rework PLL handling. Use DAPM for powering the PLL and OSC down and use
>>   set_sysclk to select the system clock instead of doing this implicitly in
>>   set_pll.
>> ---
>>  MAINTAINERS                |    1 +
>>  sound/soc/codecs/Kconfig   |    4 +
>>  sound/soc/codecs/Makefile  |    2 +
>>  sound/soc/codecs/adav80x.c |  908 ++++++++++++++++++++++++++++++++++++++++++++
>>  sound/soc/codecs/adav80x.h |   31 ++
>>  5 files changed, 946 insertions(+), 0 deletions(-)
>>  create mode 100644 sound/soc/codecs/adav80x.c
>>  create mode 100644 sound/soc/codecs/adav80x.h
>>
> 
> snip
> 
>> +
>> +static int adav80x_probe(struct snd_soc_codec *codec)
>> +{
>> +       int ret;
>> +       struct adav80x *adav80x = snd_soc_codec_get_drvdata(codec);
>> +
>> +       ret = snd_soc_codec_set_cache_io(codec, 7, 9, adav80x->control_type);
>> +       if (ret) {
>> +               dev_err(codec->dev, "failed to set cache I/O: %d\n", ret);
>> +               return ret;
>> +       }
>> +
>> +       /* Power down SYSCLK output, power down S/PDIF receiver */
>> +       snd_soc_write(codec, ADAV80X_PLL_OUTE, 0x27);
>> +       /* Disable DAC zero flag */
>> +       snd_soc_write(codec, ADAV80X_DAC_CTRL3, 0x6);
>> +
>> +       return adav80x_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
>> +}
>> +
> 
> It's usually better disable things like sysclk output in your machine driver as others may depend on it for probing.

What is the proper API to do this? set_sysclk with dir = SND_SOC_CLOCK_OUT and
freq = 0?