[alsa-devel] Regression in 3.0: oops with module RO/NX in snd_printk when loading snd-hda-intel (gold linker bug?)

Maarten Lankhorst m.b.lankhorst at gmail.com
Fri Jun 10 14:56:59 CEST 2011


Op 10-06-11 14:23, Takashi Iwai schreef:
> At Fri, 10 Jun 2011 12:14:14 +0200,
> Maarten Lankhorst wrote:
>>
>> Since 3.0.0rc1 I get an oops in alc_auto_parse_customize_define, when it's calling snd_printk, I have module NX/RO enabled, and linked the kernel with gold. the only command I do is 'modprobe snd debug=8; modprobe snd-hda-intel' after init=/bin/bash
>>
>> ld --version: GNU gold (GNU Binutils for Ubuntu 2.21.0.20110327) 1.11
>>
>> [   43.327003] HDA Intel 0000:00:1b.0: enabling device (0000 -> 0002)
>> [   43.327012] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>> [   43.327063] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>> [   43.327090] HDA Intel 0000:00:1b.0: setting latency timer to 64
>> [   43.327097] BUG: unable to handle kernel paging request at ffffffffa003c80a
>> [   43.327253] IP: [<ffffffffa002f791>] __snd_printk+0x71/0x110 [snd]
>> [   43.327392] PGD 1a25067 PUD 1a29063 PMD 231bce067 PTE 0
>> [   43.327523] Oops: 0000 [#1] PREEMPT SMP
>> [   43.327620] CPU 1
>> [   43.327660] Modules linked in: snd_hda_intel(+) snd_hda_codec snd_hwdep snd_pcm_oss snd_pcm snd_page_alloc snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device
>> snd_timer snd soundcore
>> [   43.328104]
>> [   43.328134] Pid: 149, comm: modprobe Not tainted 3.0.0-rc2-patser+ #34 To Be Filled By O.E.M. To Be Filled By O.E.M./P67 Pro3
>> [   43.328393] RIP: 0010:[<ffffffffa002f791>]  [<ffffffffa002f791>] __snd_printk+0x71/0x110 [snd]
>> [   43.328581] RSP: 0018:ffff8802310a9c38  EFLAGS: 00010216
>> [   43.328696] RAX: ffff8802310a9c78 RBX: 0000000000000002 RCX: ffffffffa00bea30
>> [   43.328851] RDX: 0000000000000a1a RSI: ffffffffa00be00a RDI: ffffffffa00be00a
>> [   43.329006] RBP: ffff8802310a9cb8 R08: 0000000000004401 R09: 0000000000000040
>> [   43.329161] R10: 00000000000000d8 R11: 0000000000000002 R12: ffffffffa00bea30
>> [   43.329316] R13: ffff88023110e800 R14: ffff88023110e800 R15: 0000000000004401
>> [   43.329472] FS:  00007fc62e05c720(0000) GS:ffff88023f480000(0000) knlGS:0000000000000000
>> [   43.329647] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
>> [   43.329772] CR2: ffffffffa003c80a CR3: 00000002310b6000 CR4: 00000000000406e0
>> [   43.329927] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
>> [   43.330082] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
>> [   43.330237] Process modprobe (pid: 149, threadinfo ffff8802310a8000, task ffff8802311216f0)
>> [   43.330418] Stack:
>> [   43.330462]  ffff8802310a9c58 ffffffff81a05080 ffff880200000020 ffff8802310a9cc8
>> [   43.330640]  ffff8802310a9c78 ffffffff810bab78 ffff8802310a9c98 0000000005411735
>> [   43.330815]  ffff88023110e800 40ff880232ad3000 ffff880232ad3000 ffff880232ad3000
>> [   43.330991] Call Trace:
>> [   43.331044]  [<ffffffff810bab78>] ? synchronize_irq+0x58/0xf0
>> [   43.336434]  [<ffffffffa00bd191>] azx_probe+0x48b/0x9fb [snd_hda_intel]
>> [   43.341867]  [<ffffffff81317e8f>] local_pci_probe+0x5f/0xd0
>> [   43.347300]  [<ffffffff813185f9>] pci_device_probe+0x119/0x120
>> [   43.352744]  [<ffffffff813b27aa>] ? driver_sysfs_add+0x7a/0xb0
>> [   43.358193]  [<ffffffff813b2b23>] driver_probe_device+0xa3/0x2a0
>> [   43.363649]  [<ffffffff813b2dcb>] __driver_attach+0xab/0xb0
>> [   43.369038]  [<ffffffff813b2d20>] ? driver_probe_device+0x2a0/0x2a0
>> [   43.374387]  [<ffffffff813b193e>] bus_for_each_dev+0x5e/0x90
>> [   43.379725]  [<ffffffff813b272e>] driver_attach+0x1e/0x20
>> [   43.385029]  [<ffffffff813b22d0>] bus_add_driver+0x160/0x2b0
>> [   43.390172]  [<ffffffffa0021000>] ? 0xffffffffa0020fff
>> [   43.395151]  [<ffffffff813b3394>] driver_register+0x74/0x130
>> [   43.400133]  [<ffffffffa0021000>] ? 0xffffffffa0020fff
>> [   43.405010]  [<ffffffff81318876>] __pci_register_driver+0x56/0xd0
>> [   43.409827]  [<ffffffff8102b653>] ? set_memory_nx+0x43/0x50
>> [   43.414645]  [<ffffffffa002101e>] alsa_card_azx_init+0x1e/0x1000 [snd_hda_intel]
>> [   43.419550]  [<ffffffff810002d5>] do_one_initcall+0x45/0x170
>> [   43.424489]  [<ffffffff8109505a>] sys_init_module+0xfa/0x250
>> [   43.429420]  [<ffffffff8157c52b>] system_call_fastpath+0x16/0x1b
>> [   43.434403] Code: 00 00 00 75 6b 48 8b 5d f0 4c 8b 65 f8 c9 c3 48 8d 45 10 c7 45 90 20 00 00 00 48 89 45 98 48 8d 45 c0 48 89 45 a0 80 3e 2f 74 78 <8b> 05 73 d0 00 00 85 db 89 45 b0 48 c7 c6 b3 23 03 a0 48 c7 c0
>> [   43.444891] RIP  [<ffffffffa002f791>] __snd_printk+0x71/0x110 [snd]
>> [   43.450012]  RSP <ffff8802310a9c38>
>> [   43.450013] CR2: ffffffffa003c80a
>> [   43.450014] ---[ end trace 890ffb2c861edf22 ]---
>>
>> everything sound loaded modular, all hda codecs too.
>>
>> CONFIG_SND_VERBOSE_PRINTK=y
>> CONFIG_SND_DEBUG=y
>> CONFIG_SND_DEBUG_VERBOSE=y
>>
>> module RO/NX is set, which I assume is causing the problem.
>>
>> I don't understand the oops, but disassembly of the specific offset is below, from objdump -S:
>>
>> 7de1 is the location of the crash
>>
>> #ifdef CONFIG_SND_VERBOSE_PRINTK
>> /* strip the leading path if the given path is absolute */
>> static const char *sanity_file_name(const char *path)
>> {
>>         if (*path == '/')
>>     7ddc:       80 3e 2f                cmpb   $0x2f,(%rsi)
>>     7ddf:       74 78                   je     7e59 <__snd_printk+0xe9>
>> /* print file and line with a certain printk prefix */
>> static int print_snd_pfx(unsigned int level, const char *path, int line,
>>                          const char *format)
>> {
>>         const char *file = sanity_file_name(path);
>>         char tmp[] = "<0>";
>>     7de1:       8b 05 00 00 00 00       mov    0x0(%rip),%eax        # 7de7 <__snd_printk+0x77>
>>         const char *pfx = level ? KERN_DEBUG : KERN_DEFAULT;
>>     7de7:       85 db                   test   %ebx,%ebx
>> /* print file and line with a certain printk prefix */
>> static int print_snd_pfx(unsigned int level, const char *path, int line,
>>                          const char *format)
>> {
>>         const char *file = sanity_file_name(path);
>>         char tmp[] = "<0>";
>>     7de9:       89 45 b0                mov    %eax,-0x50(%rbp)
>>         const char *pfx = level ? KERN_DEBUG : KERN_DEFAULT;
>>     7dec:       48 c7 c6 00 00 00 00    mov    $0x0,%rsi
>>     7df3:       48 c7 c0 00 00 00 00    mov    $0x0,%rax
>>     7dfa:       48 0f 44 f0             cmove  %rax,%rsi
>>
>> ---
>> Seems to me like it's segfaulting when loading <0>\0 (4 bytes, so fits in an integer) to %eax. building all modules with the normal binutils works fine, and makes this crash disappear.
>>
>> Is this bug interesting enough that I'll see if I can find the commit which caused this regression?
> The snd_printk() stuff can be nowadays better presented with %pV.
> Does the patch below work for you?
>
>
> thanks,
>
> Takashi
>
> ---
> diff --git a/sound/core/misc.c b/sound/core/misc.c
> index 2c41825..095e423 100644
> --- a/sound/core/misc.c
> +++ b/sound/core/misc.c
> @@ -59,25 +59,8 @@ static const char *sanity_file_name(const char *path)
>  		return path;
>  }
>  
> -/* print file and line with a certain printk prefix */
> -static int print_snd_pfx(unsigned int level, const char *path, int line,
> -			 const char *format)
> -{
> -	const char *file = sanity_file_name(path);
> -	char tmp[] = "<0>";
> -	const char *pfx = level ? KERN_DEBUG : KERN_DEFAULT;
> -	int ret = 0;
> -
> -	if (format[0] == '<' && format[2] == '>') {
> -		tmp[1] = format[1];
> -		pfx = tmp;
> -		ret = 1;
> -	}
> -	printk("%sALSA %s:%d: ", pfx, file, line);
> -	return ret;
> -}
>  #else
> -#define print_snd_pfx(level, path, line, format)	0
> +#define verbose_printk(level, path, line, fmt, args)	printk(fmt, args)
>  #endif
#define verbose_printk makes no sense?
>  
>  #if defined(CONFIG_SND_DEBUG) || defined(CONFIG_SND_VERBOSE_PRINTK)
> @@ -85,15 +68,29 @@ void __snd_printk(unsigned int level, const char *path, int line,
>  		  const char *format, ...)
>  {
>  	va_list args;
> -	
> +#ifdef CONFIG_SND_VERBOSE_PRINTK
> +	struct va_format vaf;
> +	char verbose_fmt[] = KERN_DEFAULT "ALSA %s:%d %pV";
> +#endif
> +
>  #ifdef CONFIG_SND_DEBUG	
>  	if (debug < level)
>  		return;
>  #endif
> +
>  	va_start(args, format);
> -	if (print_snd_pfx(level, path, line, format))
> -		format += 3; /* skip the printk level-prefix */
> +#ifdef CONFIG_SND_VERBOSE_PRINTK
> +	vaf.fmt = format;
> +	vaf.va = &args;
> +	if (format[0] == '<' && format[2] == '>') {
> +		memcpy(verbose_fmt, format, 3);
> +		vaf.fmt = format + 3;
> +	} else if (level)
> +		memcpy(verbose_fmt, KERN_DEBUG, 3);
> +	printk(verbose_fmt, sanity_file_name(path), line, &vaf);
> +#else
>  	vprintk(format, args);
> +#endif
>  	va_end(args);
>  }
>  EXPORT_SYMBOL_GPL(__snd_printk);
It fixes the oops.

Tested-by: Maarten Lankhorst <m.b.lankhorst at gmail.com>

~Maarten


More information about the Alsa-devel mailing list