[alsa-devel] [PATCH 02/10] ASoc: mxs: add mxs-saif driver

Dong Aisheng dongas86 at gmail.com
Fri Jul 8 20:35:30 CEST 2011


2011/7/9 Sascha Hauer <s.hauer at pengutronix.de>:
> On Fri, Jul 08, 2011 at 11:59:42PM +0800, Dong Aisheng wrote:
>> Signed-off-by: Dong Aisheng <b29396 at freescale.com>
>> ---
>>  sound/soc/mxs/mxs-saif.c |  524 ++++++++++++++++++++++++++++++++++++++++++++++
>>  sound/soc/mxs/mxs-saif.h |  124 +++++++++++
>>  2 files changed, 648 insertions(+), 0 deletions(-)
>>
>> diff --git a/sound/soc/mxs/mxs-saif.c b/sound/soc/mxs/mxs-saif.c
>> new file mode 100644
>> index 0000000..afc6e57
>> --- /dev/null
>> +++ b/sound/soc/mxs/mxs-saif.c
>> @@ -0,0 +1,524 @@
>> +/*
>> + * Copyright 2011 Freescale Semiconductor, Inc.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License along
>> + * with this program; if not, write to the Free Software Foundation, Inc.,
>> + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
>> + */
>> +
>> +#include <linux/module.h>
>> +#include <linux/init.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/slab.h>
>> +#include <linux/dma-mapping.h>
>> +#include <linux/clk.h>
>> +#include <linux/delay.h>
>> +#include <sound/core.h>
>> +#include <sound/pcm.h>
>> +#include <sound/pcm_params.h>
>> +#include <sound/soc.h>
>> +#include <mach/dma.h>
>> +#include <asm/mach-types.h>
>> +#include <mach/hardware.h>
>> +#include <mach/mx28.h>
>
> Is this include really needed?
Thanks a lot for your quick review.
i checked and it's not needed.
Including mxs.h would be ok for using MXS_CLR_ADDR.

>> +
>> +#include "mxs-saif.h"
>> +
>> +/*
>> +* SAIF system clock configuration.
>> +* Should only be called when port is inactive.
>> +*/
>> +static int mxs_saif_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
>> +                     int clk_id, unsigned int freq, int dir)
>> +{
>> +     struct mxs_saif *saif = snd_soc_dai_get_drvdata(cpu_dai);
>> +
>> +     switch (clk_id) {
>> +     case MXS_SAIF_SYS_CLK:
>> +             clk_set_rate(saif->clk, freq);
>> +             clk_enable(saif->clk);
>
> This clk_enable is unbalanced. You enabled the clock in probe() already.
Yes, will fix it.

>> +             break;
>> +     default:
>> +             return -EINVAL;
>> +     }
>> +     return 0;
>> +}
>> +
>> +/*
>> + * SAIF Clock dividers
>> + * Should only be called when port is inactive.
>> + */
>> +static int mxs_saif_set_dai_clkdiv(struct snd_soc_dai *cpu_dai,
>> +                               int div_id, int div)
>> +{
>> +     u32 scr;
>> +     struct mxs_saif *saif = snd_soc_dai_get_drvdata(cpu_dai);
>> +
>> +     scr = __raw_readl(saif->base + SAIF_CTRL);
>> +     scr &= ~BM_SAIF_CTRL_BITCLK_MULT_RATE;
>> +     scr &= ~BM_SAIF_CTRL_BITCLK_BASE_RATE;
>> +
>> +     switch (div_id) {
>> +     case MXS_SAIF_MCLK:
>> +             switch (div) {
>> +             case 32:
>> +                     scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(4);
>> +                     scr &= ~BM_SAIF_CTRL_BITCLK_BASE_RATE;
>> +                     break;
>> +             case 64:
>> +                     scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(3);
>> +                     scr &= ~BM_SAIF_CTRL_BITCLK_BASE_RATE;
>> +                     break;
>> +             case 128:
>> +                     scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(2);
>> +                     scr &= ~BM_SAIF_CTRL_BITCLK_BASE_RATE;
>> +                     break;
>> +             case 256:
>> +                     scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(1);
>> +                     scr &= ~BM_SAIF_CTRL_BITCLK_BASE_RATE;
>> +                     break;
>> +             case 512:
>> +                     scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(0);
>> +                     scr &= ~BM_SAIF_CTRL_BITCLK_BASE_RATE;
>> +                     break;
>> +             case 48:
>> +                     scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(3);
>> +                     scr |= BM_SAIF_CTRL_BITCLK_BASE_RATE;
>> +                     break;
>> +             case 96:
>> +                     scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(2);
>> +                     scr |= BM_SAIF_CTRL_BITCLK_BASE_RATE;
>> +                     break;
>> +             case 192:
>> +                     scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(1);
>> +                     scr |= BM_SAIF_CTRL_BITCLK_BASE_RATE;
>> +                     break;
>> +             case 384:
>> +                     scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(0);
>> +                     scr |= BM_SAIF_CTRL_BITCLK_BASE_RATE;
>> +                     break;
>> +             default:
>> +                     return -EINVAL;
>> +             }
>> +             break;
>> +     default:
>> +             return -EINVAL;
>> +     }
>> +
>> +     __raw_writel(scr, saif->base + SAIF_CTRL);
>> +
>> +     return 0;
>> +}
>> +
>> +/*
>> + * SAIF DAI format configuration.
>> + * Should only be called when port is inactive.
>> + * Note: We don't use the I2S modes but instead manually configure the
>> + * SAIF for I2S.
>> + */
>> +static int mxs_saif_set_dai_fmt(struct snd_soc_dai *cpu_dai, unsigned int fmt)
>> +{
>> +     u32 scr, stat;
>> +     u32 scr0;
>> +     struct mxs_saif *saif = snd_soc_dai_get_drvdata(cpu_dai);
>> +
>> +     stat = __raw_readl(saif->base + SAIF_STAT);
>> +     if (stat & BM_SAIF_STAT_BUSY)
>> +             return 0;
>
> Returning succesfully doesn't seem right here.
Will replace with -EBUSY.

>> +
>> +     scr0 = __raw_readl(saif->base + SAIF_CTRL);
>> +     scr0 = scr0 & ~BM_SAIF_CTRL_BITCLK_EDGE & ~BM_SAIF_CTRL_LRCLK_POLARITY \
>> +             & ~BM_SAIF_CTRL_JUSTIFY & ~BM_SAIF_CTRL_DELAY;
>> +     scr = 0;
>> +
>> +     /* DAI mode */
>> +     switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
>> +     case SND_SOC_DAIFMT_I2S:
>> +             /* data frame low 1clk before data */
>> +             scr |= BM_SAIF_CTRL_DELAY;
>> +             scr &= ~BM_SAIF_CTRL_LRCLK_POLARITY;
>> +             break;
>> +     case SND_SOC_DAIFMT_LEFT_J:
>> +             /* data frame high with data */
>> +             scr &= ~BM_SAIF_CTRL_DELAY;
>> +             scr &= ~BM_SAIF_CTRL_LRCLK_POLARITY;
>> +             scr &= ~BM_SAIF_CTRL_JUSTIFY;
>> +             break;
>
>        default:
>                return -EINVAL;
Will add.

>> +     }
>> +
>> +     /* DAI clock inversion */
>> +     switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
>> +     case SND_SOC_DAIFMT_IB_IF:
>> +             scr |= BM_SAIF_CTRL_BITCLK_EDGE;
>> +             scr |= BM_SAIF_CTRL_LRCLK_POLARITY;
>> +             break;
>> +     case SND_SOC_DAIFMT_IB_NF:
>> +             scr |= BM_SAIF_CTRL_BITCLK_EDGE;
>> +             scr &= ~BM_SAIF_CTRL_LRCLK_POLARITY;
>> +             break;
>> +     case SND_SOC_DAIFMT_NB_IF:
>> +             scr &= ~BM_SAIF_CTRL_BITCLK_EDGE;
>> +             scr |= BM_SAIF_CTRL_LRCLK_POLARITY;
>> +             break;
>> +     case SND_SOC_DAIFMT_NB_NF:
>> +             scr &= ~BM_SAIF_CTRL_BITCLK_EDGE;
>> +             scr &= ~BM_SAIF_CTRL_LRCLK_POLARITY;
>> +             break;
>> +     }
>
> A question more for Liam and Mark: Would it make sense to add individual
> masks for the clock inversion and frame sync inversion? I code like the
> above in every driver, and I think this could become simpler.
>
>
>> +
>> +     /*
>> +      * Note: We simply just support master mode since SAIF TX only supports
>> +      * master mode.
>> +      */
>
> When this is true...
It's hw limitation.
Defined in MX28 spec 35.2.1.
i quote it as follows;
For transmit, BITCLK and LRCLK are always driven by the SAIF.
...
Coniguring the SAIF for transmit makes it the master by default.
....

>> +     switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
>> +     case SND_SOC_DAIFMT_CBS_CFS:
>> +             scr &= ~BM_SAIF_CTRL_SLAVE_MODE;
>> +             __raw_writel(scr | scr0, saif->base + SAIF_CTRL);
>> +             break;
>> +     case SND_SOC_DAIFMT_CBM_CFS:
>> +             break;
>> +     case SND_SOC_DAIFMT_CBS_CFM:
>> +             break;
>
> You should return an error here.
Will add.

>> +     case SND_SOC_DAIFMT_CBM_CFM:
>> +             return -EINVAL;
>> +             break;
>> +     }
>> +
>> +     return 0;
>> +}
>> +
>> +static int mxs_saif_startup(struct snd_pcm_substream *substream,
>> +                        struct snd_soc_dai *cpu_dai)
>> +{
>> +     struct mxs_saif *saif = snd_soc_dai_get_drvdata(cpu_dai);
>> +     snd_soc_dai_set_dma_data(cpu_dai, substream, &saif->dma_param);
>> +
>> +     return 0;
>> +}
>> +
>> +/*
>> + * Should only be called when port is inactive.
>> + * although can be called multiple times by upper layers.
>> + */
>> +static int mxs_saif_hw_params(struct snd_pcm_substream *substream,
>> +                          struct snd_pcm_hw_params *params,
>> +                          struct snd_soc_dai *cpu_dai)
>> +{
>> +     struct mxs_saif *saif = snd_soc_dai_get_drvdata(cpu_dai);
>> +     u32 scr;
>> +
>> +     scr = __raw_readl(saif->base + SAIF_CTRL);
>> +
>> +     /* cant change any parameters when SAIF is running */
>> +     /* DAI data (word) size */
>> +     scr &= ~BM_SAIF_CTRL_WORD_LENGTH;
>> +     scr &= ~BM_SAIF_CTRL_BITCLK_48XFS_ENABLE;
>> +     switch (params_format(params)) {
>> +     case SNDRV_PCM_FORMAT_S16_LE:
>> +             scr |= BF_SAIF_CTRL_WORD_LENGTH(0);
>> +             break;
>> +     case SNDRV_PCM_FORMAT_S20_3LE:
>> +             scr |= BF_SAIF_CTRL_WORD_LENGTH(4);
>> +             scr |= BM_SAIF_CTRL_BITCLK_48XFS_ENABLE;
>> +             break;
>> +     case SNDRV_PCM_FORMAT_S24_LE:
>> +             scr |= BF_SAIF_CTRL_WORD_LENGTH(8);
>> +             scr |= BM_SAIF_CTRL_BITCLK_48XFS_ENABLE;
>> +             break;
>
>        default:
>                return -EINVAL;
Will add.

>> +     }
>> +
>> +     /* Tx/Rx config */
>> +     if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
>> +             /* enable TX mode */
>> +             scr &= ~BM_SAIF_CTRL_READ_MODE;
>> +     } else {
>> +             /* enable RX mode */
>> +             scr |= BM_SAIF_CTRL_READ_MODE;
>> +     }
>> +
>> +     __raw_writel(scr, saif->base + SAIF_CTRL);
>> +     return 0;
>> +}
>> +
>> +static int mxs_saif_prepare(struct snd_pcm_substream *substream,
>> +                        struct snd_soc_dai *cpu_dai)
>> +{
>> +     struct mxs_saif *saif = snd_soc_dai_get_drvdata(cpu_dai);
>> +     __raw_writel(BM_SAIF_CTRL_CLKGATE,
>> +             saif->base + SAIF_CTRL + MXS_CLR_ADDR);
>> +
>> +     return 0;
>> +}
>> +
>> +static int mxs_saif_trigger(struct snd_pcm_substream *substream, int cmd,
>> +                             struct snd_soc_dai *cpu_dai)
>> +{
>> +     struct mxs_saif *saif = snd_soc_dai_get_drvdata(cpu_dai);
>> +
>> +     switch (cmd) {
>> +     case SNDRV_PCM_TRIGGER_START:
>> +     case SNDRV_PCM_TRIGGER_RESUME:
>> +     case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
>> +             if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
>> +                     /*write a data to saif data register to trigger
>> +                             the transfer*/
>
> /* multiline comments
>  * like this please
>  */
Got it.

>> +                     __raw_writel(0, saif->base + SAIF_DATA);
>> +             else
>> +                     /*read a data from saif data register to trigger
>> +                             the receive*/
>> +                     __raw_readl(saif->base + SAIF_DATA);
>> +             break;
>> +     case SNDRV_PCM_TRIGGER_SUSPEND:
>> +     case SNDRV_PCM_TRIGGER_STOP:
>> +     case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
>> +             break;
>> +     default:
>> +             return -EINVAL;
>> +     }
>> +
>> +     return 0;
>> +}
>> +
>> +#define MXS_SAIF_RATES               SNDRV_PCM_RATE_8000_192000
>> +#define MXS_SAIF_FORMATS \
>> +     (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \
>> +     SNDRV_PCM_FMTBIT_S24_LE)
>> +
>> +static struct snd_soc_dai_ops mxs_saif_dai_ops = {
>> +     .startup = mxs_saif_startup,
>> +     .trigger = mxs_saif_trigger,
>> +     .prepare = mxs_saif_prepare,
>> +     .hw_params = mxs_saif_hw_params,
>> +     .set_sysclk = mxs_saif_set_dai_sysclk,
>> +     .set_clkdiv = mxs_saif_set_dai_clkdiv,
>> +     .set_fmt = mxs_saif_set_dai_fmt,
>> +};
>> +
>> +static int mxs_saif_dai_probe(struct snd_soc_dai *dai)
>> +{
>> +     struct mxs_saif *saif = dev_get_drvdata(dai->dev);
>> +
>> +     snd_soc_dai_set_drvdata(dai, saif);
>> +
>> +     /* Reset */
>> +     __raw_writel(BM_SAIF_CTRL_SFTRST,
>> +             saif->base + SAIF_CTRL + MXS_CLR_ADDR);
>> +
>> +     /* enable MCLK output early since codec may need it */
>> +     __raw_writel(BM_SAIF_CTRL_CLKGATE,
>> +             saif->base + SAIF_CTRL + MXS_CLR_ADDR);
>> +     __raw_writel(BM_SAIF_CTRL_RUN,
>> +             saif->base + SAIF_CTRL + MXS_SET_ADDR);
>> +
>> +     return 0;
>> +}
>> +
>> +static struct snd_soc_dai_driver mxs_saif_dai = {
>> +     .name = "mxs-saif",
>> +     .probe = mxs_saif_dai_probe,
>> +     .playback = {
>> +             .channels_min = 2,
>> +             .channels_max = 2,
>> +             .rates = MXS_SAIF_RATES,
>> +             .formats = MXS_SAIF_FORMATS,
>> +     },
>> +     .capture = {
>> +             .channels_min = 2,
>> +             .channels_max = 2,
>> +             .rates = MXS_SAIF_RATES,
>> +             .formats = MXS_SAIF_FORMATS,
>> +     },
>> +     .ops = &mxs_saif_dai_ops,
>> +};
>> +
>> +static irqreturn_t mxs_saif_irq(int irq, void *dev_id)
>> +{
>> +     struct mxs_saif *saif = dev_id;
>> +
>> +     if (saif->fifo_err_counter++ % 100 == 0)
>> +             printk(KERN_ERR "saif_irq SAIF_STAT %x SAIF_CTRL %x \
>> +                     fifo_errs=%d \n",
>> +                    __raw_readl(saif->base + SAIF_STAT),
>> +                    __raw_readl(saif->base + SAIF_CTRL),
>> +                    saif->fifo_err_counter);
>> +     __raw_writel(BM_SAIF_STAT_FIFO_UNDERFLOW_IRQ |
>> +                     BM_SAIF_STAT_FIFO_OVERFLOW_IRQ,
>> +                     saif->base + SAIF_STAT + MXS_CLR_ADDR);
>> +
>> +     return IRQ_HANDLED;
>> +}
>> +
>> +static int mxs_saif_probe(struct platform_device *pdev)
>> +{
>> +     struct resource *res;
>> +     struct mxs_saif *saif;
>> +     int ret = 0;
>> +
>> +     saif = kzalloc(sizeof(*saif), GFP_KERNEL);
>> +     if (!saif)
>> +             return -ENOMEM;
>
> Consider using devm_kzalloc and friends, it makes the error path less
> error prone.
Will use it. Thanks for the suggestion.

>> +
>> +     saif->irq = platform_get_irq(pdev, 0);
>> +     if (saif->irq < 0) {
>> +             ret = saif->irq;
>> +             dev_err(&pdev->dev, "failed to get irq resource: %d\n",
>> +                     ret);
>> +             goto failed_get_irq1;
>> +     }
>> +
>> +     saif->fifo_err_counter = 0;
>> +     ret = request_irq(saif->irq, mxs_saif_irq, 0, "mxs-saif", saif);
>> +     if (ret) {
>> +             dev_err(&pdev->dev, "failed to request irq\n");
>> +             goto failed_req_irq;
>> +     }
>> +
>> +     saif->dma_param.chan_irq = platform_get_irq(pdev, 1);
>> +     if (saif->dma_param.chan_irq < 0) {
>> +             ret = saif->dma_param.chan_irq;
>> +             dev_err(&pdev->dev, "failed to get dma irq resource: %d\n",
>> +                     ret);
>> +             goto failed_get_irq2;
>> +     }
>> +
>> +     saif->clk = clk_get(&pdev->dev, NULL);
>> +     if (IS_ERR(saif->clk)) {
>> +             ret = PTR_ERR(saif->clk);
>> +             dev_err(&pdev->dev, "Cannot get the clock: %d\n",
>> +                     ret);
>> +             goto failed_clk;
>> +     }
>> +     clk_set_rate(saif->clk, 12000000);
>> +     clk_enable(saif->clk);
>> +
>> +     res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> +     if (!res) {
>> +             ret = -ENODEV;
>> +             dev_err(&pdev->dev, "failed to get io resource: %d\n",
>> +                     ret);
>> +             goto failed_get_resource;
>> +     }
>> +
>> +     if (!request_mem_region(res->start, resource_size(res), "mxs-saif")) {
>> +             dev_err(&pdev->dev, "request_mem_region failed\n");
>> +             ret = -EBUSY;
>> +             goto failed_get_resource;
>> +     }
>> +
>> +     saif->base = ioremap(res->start, resource_size(res));
>> +     if (!saif->base) {
>> +             dev_err(&pdev->dev, "ioremap failed\n");
>> +             ret = -ENODEV;
>> +             goto failed_ioremap;
>> +     }
>> +
>> +     res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
>> +     if (!res) {
>> +             ret = -ENODEV;
>> +             dev_err(&pdev->dev, "failed to get dma resource: %d\n",
>> +                     ret);
>> +             goto failed_get_resource;
>> +     }
>> +     saif->dma_param.chan_num = res->start;
>> +
>> +     platform_set_drvdata(pdev, saif);
>> +
>> +     ret = snd_soc_register_dai(&pdev->dev, &mxs_saif_dai);
>> +     if (ret) {
>> +             dev_err(&pdev->dev, "register DAI failed\n");
>> +             goto failed_register;
>> +     }
>> +
>> +     saif->soc_platform_pdev = platform_device_alloc(
>> +                                     "mxs-pcm-audio", pdev->id);
>> +     if (!saif->soc_platform_pdev) {
>> +             ret = -ENOMEM;
>> +             goto failed_pdev_alloc;
>> +     }
>> +
>> +     platform_set_drvdata(saif->soc_platform_pdev, saif);
>> +     ret = platform_device_add(saif->soc_platform_pdev);
>> +     if (ret) {
>> +             dev_err(&pdev->dev, "failed to add soc platform device\n");
>> +             goto failed_pdev_add;
>> +     }
>> +
>> +     return 0;
>> +
>> +failed_pdev_add:
>> +     platform_device_put(saif->soc_platform_pdev);
>> +failed_pdev_alloc:
>> +     snd_soc_unregister_dai(&pdev->dev);
>> +failed_register:
>> +     iounmap(saif->base);
>> +failed_ioremap:
>> +     release_mem_region(res->start, resource_size(res));
>> +failed_get_resource:
>> +     clk_disable(saif->clk);
>> +     clk_put(saif->clk);
>> +failed_clk:
>> +failed_get_irq2:
>> +     free_irq(saif->irq, saif);
>> +failed_req_irq:
>> +failed_get_irq1:
>> +     kfree(saif);
>> +
>> +     return ret;
>> +}
>> +
>> +static int __devexit mxs_saif_remove(struct platform_device *pdev)
>> +{
>> +     struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> +     struct mxs_saif *saif = platform_get_drvdata(pdev);
>> +
>> +     platform_device_unregister(saif->soc_platform_pdev);
>> +
>> +     snd_soc_unregister_dai(&pdev->dev);
>> +
>> +     iounmap(saif->base);
>> +     release_mem_region(res->start, resource_size(res));
>> +     free_irq(saif->irq, saif);
>> +
>> +     clk_disable(saif->clk);
>> +     clk_put(saif->clk);
>> +
>> +     kfree(saif);
>> +
>> +     return 0;
>> +}
>> +
>> +static struct platform_driver mxs_saif_driver = {
>> +     .probe = mxs_saif_probe,
>> +     .remove = __devexit_p(mxs_saif_remove),
>> +
>> +     .driver = {
>> +             .name = "mxs-saif",
>> +             .owner = THIS_MODULE,
>> +     },
>> +};
>> +
>> +static int __init mxs_saif_init(void)
>> +{
>> +     return platform_driver_register(&mxs_saif_driver);
>> +}
>> +
>> +static void __exit mxs_saif_exit(void)
>> +{
>> +     platform_driver_unregister(&mxs_saif_driver);
>> +}
>> +
>> +module_init(mxs_saif_init);
>> +module_exit(mxs_saif_exit);
>> +MODULE_AUTHOR("Freescale Semiconductor, Inc.");
>> +MODULE_DESCRIPTION("MXS ASoC SAIF driver");
>> +MODULE_LICENSE("GPL");
>> diff --git a/sound/soc/mxs/mxs-saif.h b/sound/soc/mxs/mxs-saif.h
>> new file mode 100644
>> index 0000000..dd26b37
>> --- /dev/null
>> +++ b/sound/soc/mxs/mxs-saif.h
>> @@ -0,0 +1,124 @@
>> +/*
>> + * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License along
>> + * with this program; if not, write to the Free Software Foundation, Inc.,
>> + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
>> + */
>> +
>> +
>> +#ifndef _MXS_SAIF_H
>> +#define _MXS_SAIF_H
>> +
>> +#define SAIF_CTRL    0x0
>> +#define SAIF_STAT    0x10
>> +#define SAIF_DATA    0x20
>> +#define SAIF_VERSION 0X30
>> +
>> +/* SAIF_CTRL */
>> +#define BM_SAIF_CTRL_SFTRST          0x80000000
>> +#define BM_SAIF_CTRL_CLKGATE         0x40000000
>> +#define BP_SAIF_CTRL_BITCLK_MULT_RATE        27
>> +#define BM_SAIF_CTRL_BITCLK_MULT_RATE        0x38000000
>> +#define BF_SAIF_CTRL_BITCLK_MULT_RATE(v) \
>> +             (((v) << 27) & BM_SAIF_CTRL_BITCLK_MULT_RATE)
>> +#define BM_SAIF_CTRL_BITCLK_BASE_RATE        0x04000000
>> +#define BM_SAIF_CTRL_FIFO_ERROR_IRQ_EN       0x02000000
>> +#define BM_SAIF_CTRL_FIFO_SERVICE_IRQ_EN     0x01000000
>> +#define BP_SAIF_CTRL_RSRVD2          21
>> +#define BM_SAIF_CTRL_RSRVD2          0x00E00000
>> +
>> +#define BP_SAIF_CTRL_DMAWAIT_COUNT   16
>> +#define BM_SAIF_CTRL_DMAWAIT_COUNT   0x001F0000
>> +#define BF_SAIF_CTRL_DMAWAIT_COUNT(v) \
>> +             (((v) << 16) & BM_SAIF_CTRL_DMAWAIT_COUNT)
>> +#define BP_SAIF_CTRL_CHANNEL_NUM_SELECT 14
>> +#define BM_SAIF_CTRL_CHANNEL_NUM_SELECT 0x0000C000
>> +#define BF_SAIF_CTRL_CHANNEL_NUM_SELECT(v) \
>> +             (((v) << 14) & BM_SAIF_CTRL_CHANNEL_NUM_SELECT)
>> +#define BM_SAIF_CTRL_LRCLK_PULSE     0x00002000
>> +#define BM_SAIF_CTRL_BIT_ORDER               0x00001000
>> +#define BM_SAIF_CTRL_DELAY           0x00000800
>> +#define BM_SAIF_CTRL_JUSTIFY         0x00000400
>> +#define BM_SAIF_CTRL_LRCLK_POLARITY  0x00000200
>> +#define BM_SAIF_CTRL_BITCLK_EDGE     0x00000100
>> +#define BP_SAIF_CTRL_WORD_LENGTH     4
>> +#define BM_SAIF_CTRL_WORD_LENGTH     0x000000F0
>> +#define BF_SAIF_CTRL_WORD_LENGTH(v) \
>> +             (((v) << 4) & BM_SAIF_CTRL_WORD_LENGTH)
>> +#define BM_SAIF_CTRL_BITCLK_48XFS_ENABLE     0x00000008
>> +#define BM_SAIF_CTRL_SLAVE_MODE              0x00000004
>> +#define BM_SAIF_CTRL_READ_MODE               0x00000002
>> +#define BM_SAIF_CTRL_RUN             0x00000001
>> +
>> +/* SAIF_STAT */
>> +#define BM_SAIF_STAT_PRESENT         0x80000000
>> +#define BP_SAIF_STAT_RSRVD2          17
>> +#define BM_SAIF_STAT_RSRVD2          0x7FFE0000
>> +#define BF_SAIF_STAT_RSRVD2(v) \
>> +             (((v) << 17) & BM_SAIF_STAT_RSRVD2)
>> +#define BM_SAIF_STAT_DMA_PREQ                0x00010000
>> +#define BP_SAIF_STAT_RSRVD1          7
>> +#define BM_SAIF_STAT_RSRVD1          0x0000FF80
>> +#define BF_SAIF_STAT_RSRVD1(v) \
>> +             (((v) << 7) & BM_SAIF_STAT_RSRVD1)
>> +
>> +#define BM_SAIF_STAT_FIFO_UNDERFLOW_IRQ 0x00000040
>> +#define BM_SAIF_STAT_FIFO_OVERFLOW_IRQ       0x00000020
>> +#define BM_SAIF_STAT_FIFO_SERVICE_IRQ        0x00000010
>> +#define BP_SAIF_STAT_RSRVD0          1
>> +#define BM_SAIF_STAT_RSRVD0          0x0000000E
>> +#define BF_SAIF_STAT_RSRVD0(v) \
>> +             (((v) << 1) & BM_SAIF_STAT_RSRVD0)
>> +#define BM_SAIF_STAT_BUSY            0x00000001
>> +
>> +/* SAFI_DATA */
>> +#define BP_SAIF_DATA_PCM_RIGHT               16
>> +#define BM_SAIF_DATA_PCM_RIGHT               0xFFFF0000
>> +#define BF_SAIF_DATA_PCM_RIGHT(v) \
>> +             (((v) << 16) & BM_SAIF_DATA_PCM_RIGHT)
>> +#define BP_SAIF_DATA_PCM_LEFT                0
>> +#define BM_SAIF_DATA_PCM_LEFT                0x0000FFFF
>> +#define BF_SAIF_DATA_PCM_LEFT(v)     \
>> +             (((v) << 0) & BM_SAIF_DATA_PCM_LEFT)
>> +
>> +/* SAIF_VERSION */
>> +#define BP_SAIF_VERSION_MAJOR                24
>> +#define BM_SAIF_VERSION_MAJOR                0xFF000000
>> +#define BF_SAIF_VERSION_MAJOR(v) \
>> +             (((v) << 24) & BM_SAIF_VERSION_MAJOR)
>> +#define BP_SAIF_VERSION_MINOR                16
>> +#define BM_SAIF_VERSION_MINOR                0x00FF0000
>> +#define BF_SAIF_VERSION_MINOR(v) \
>> +             (((v) << 16) & BM_SAIF_VERSION_MINOR)
>> +#define BP_SAIF_VERSION_STEP         0
>> +#define BM_SAIF_VERSION_STEP         0x0000FFFF
>> +#define BF_SAIF_VERSION_STEP(v) \
>> +             (((v) << 0) & BM_SAIF_VERSION_STEP)
>> +
>> +#define MXS_SAIF_SYS_CLK     0
>> +#define MXS_SAIF_MCLK                1
>> +
>> +#include "mxs-pcm.h"
>> +
>> +struct mxs_saif {
>> +     struct clk *clk;
>> +     void __iomem *base;
>> +     int irq;
>> +     struct mxs_pcm_dma_params dma_param;
>> +
>> +     struct platform_device *soc_platform_pdev;
>> +     u32 fifo_err_counter;
>> +};
>> +
>> +#endif
>> --
>> 1.7.0.4
>>
>>
>>
>
> --
> Pengutronix e.K.                           |                             |
> Industrial Linux Solutions                 | http://www.pengutronix.de/  |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>


More information about the Alsa-devel mailing list