[alsa-devel] [PATCH 3/4] davinci-mcasp: fix _CBM_CFS hw_params

[Ben Gardiner]

The current davinci_mcasp_set_dai_fmt() sets bits ACLKXE and ACLKRE (CLKXM
and CLKRM as they are reffered to in SPRUFM1 [1]) for codec clock-slave/
frame-slave mode (_CBS_CFS) which selects internally generated bit-clock and
frame-sync signals; however, it does the same thing again for codec
clock-master/frame-slave mode (_CBM_CFS) in the very next case statement which
is incorrectly selecting internally generated bit-clocks in this mode.

For codec clock-master/frame-slave mode (_CBM_CFS), clear bits ACLKXE and
ACLKRE to select externally-generated bit-clocks.

[1] http://www.ti.com/litv/pdf/sprufm1

Signed-off-by: Ben Gardiner <bengardiner at nanometrics.ca>
Reviewed-by: James Nuss <jamesnuss at nanometrics.ca>
---
 sound/soc/davinci/davinci-mcasp.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/davinci/davinci-mcasp.c b/sound/soc/davinci/davinci-mcasp.c
index 1aa24a1..8004643 100644
--- a/sound/soc/davinci/davinci-mcasp.c
+++ b/sound/soc/davinci/davinci-mcasp.c
@@ -439,10 +439,10 @@ static int davinci_mcasp_set_dai_fmt(struct snd_soc_dai *cpu_dai,
 		break;
 	case SND_SOC_DAIFMT_CBM_CFS:
 		/* codec is clock master and frame slave */
-		mcasp_set_bits(base + DAVINCI_MCASP_ACLKXCTL_REG, ACLKXE);
+		mcasp_clr_bits(base + DAVINCI_MCASP_ACLKXCTL_REG, ACLKXE);
 		mcasp_set_bits(base + DAVINCI_MCASP_TXFMCTL_REG, AFSXE);
 
-		mcasp_set_bits(base + DAVINCI_MCASP_ACLKRCTL_REG, ACLKRE);
+		mcasp_clr_bits(base + DAVINCI_MCASP_ACLKRCTL_REG, ACLKRE);
 		mcasp_set_bits(base + DAVINCI_MCASP_RXFMCTL_REG, AFSRE);
 
 		mcasp_set_bits(base + DAVINCI_MCASP_PDIR_REG,
-- 
1.7.1