[alsa-devel] [PATCH] ARM: Tegra: Seaboard board updates for audio
Stephen Warren
swarren at nvidia.com
Tue Apr 12 19:32:27 CEST 2011
* Initialize clock tree for audio
* Add GPIO base definitions
* Add audio GPIO definitions
* Define platform data for WM8903 and ASoC machine driver
* Add special case for Kaen to handle HP_MUTE GPIO
* Register platform devices for audio
* Update pinmux to cater for new GPIOs used for audio
Signed-off-by: Stephen Warren <swarren at nvidia.com>
---
This patch is for 2.6.40, and for the ARM/Tegra subsystem
arch/arm/mach-tegra/board-seaboard-pinmux.c | 21 ++++++++++-
arch/arm/mach-tegra/board-seaboard.c | 52 +++++++++++++++++++++++++++
arch/arm/mach-tegra/board-seaboard.h | 12 ++++--
3 files changed, 79 insertions(+), 6 deletions(-)
diff --git a/arch/arm/mach-tegra/board-seaboard-pinmux.c b/arch/arm/mach-tegra/board-seaboard-pinmux.c
index 0bda495..e693246 100644
--- a/arch/arm/mach-tegra/board-seaboard-pinmux.c
+++ b/arch/arm/mach-tegra/board-seaboard-pinmux.c
@@ -49,7 +49,7 @@ static __initdata struct tegra_pingroup_config seaboard_pinmux[] = {
{TEGRA_PINGROUP_CRTP, TEGRA_MUX_CRT, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_CSUS, TEGRA_MUX_VI_SENSOR_CLK, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_DAP1, TEGRA_MUX_DAP1, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
- {TEGRA_PINGROUP_DAP2, TEGRA_MUX_DAP2, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
+ {TEGRA_PINGROUP_DAP2, TEGRA_MUX_DAP2, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_DAP3, TEGRA_MUX_DAP3, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_DAP4, TEGRA_MUX_DAP4, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_DDC, TEGRA_MUX_RSVD2, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
@@ -133,7 +133,7 @@ static __initdata struct tegra_pingroup_config seaboard_pinmux[] = {
{TEGRA_PINGROUP_SPDO, TEGRA_MUX_RSVD2, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_SPIA, TEGRA_MUX_GMI, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_SPIB, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
- {TEGRA_PINGROUP_SPIC, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
+ {TEGRA_PINGROUP_SPIC, TEGRA_MUX_GMI, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_SPID, TEGRA_MUX_SPI1, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_SPIE, TEGRA_MUX_SPI1, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_SPIF, TEGRA_MUX_SPI1, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE},
@@ -171,6 +171,23 @@ static struct tegra_gpio_table gpio_table[] = {
void __init seaboard_pinmux_init(void)
{
+ /*
+ * PINGROUP_SPIC contains two pins:
+ * + PX2, DISABLE_CHRGR (output)
+ * + PX3, WM8903 codec IRQ (input)
+ *
+ * The pinmux module can only configure TRISTATE vs. NORMAL on a
+ * per-group rather than per-pin basis. The group must be NORMAL
+ * since at least one pin is an output. However, we must ensure that
+ * the WM8903 IRQ is never driven, since the WM8903 itself is driving
+ * it, and we don't want multiple drivers. To ensure this, configure
+ * PX3 as a GPIO here, and set is as an input, before the pinmux table
+ * is written, which is when the pins will be un-tristated.
+ */
+ tegra_gpio_enable(TEGRA_GPIO_CDC_IRQ);
+ gpio_request(TEGRA_GPIO_CDC_IRQ, "wm8903");
+ gpio_direction_input(TEGRA_GPIO_CDC_IRQ);
+
tegra_pinmux_config_table(seaboard_pinmux, ARRAY_SIZE(seaboard_pinmux));
tegra_drive_pinmux_config_table(seaboard_drive_pinmux,
diff --git a/arch/arm/mach-tegra/board-seaboard.c b/arch/arm/mach-tegra/board-seaboard.c
index 783de17..2fdd376 100644
--- a/arch/arm/mach-tegra/board-seaboard.c
+++ b/arch/arm/mach-tegra/board-seaboard.c
@@ -26,9 +26,12 @@
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
+#include <sound/wm8903.h>
+
#include <mach/iomap.h>
#include <mach/irqs.h>
#include <mach/sdhci.h>
+#include <mach/tegra_wm8903_pdata.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -63,6 +66,10 @@ static __initdata struct tegra_clk_init_table seaboard_clk_init_table[] = {
/* name parent rate enabled */
{ "uartb", "pll_p", 216000000, true},
{ "uartd", "pll_p", 216000000, true},
+ { "pll_a", "pll_p_out1", 56448000, true },
+ { "pll_a_out0", "pll_a", 11289600, true },
+ { "cdev1", NULL, 0, true },
+ { "i2s1", "pll_a_out0", 11289600, false},
{ NULL, NULL, 0, 0},
};
@@ -134,6 +141,22 @@ static struct tegra_sdhci_platform_data sdhci_pdata4 = {
.is_8bit = 1,
};
+static struct tegra_wm8903_platform_data seaboard_audio_pdata = {
+ .gpio_spkr_en = TEGRA_GPIO_SPKR_EN,
+ .gpio_hp_det = TEGRA_GPIO_HP_DET,
+ .gpio_hp_mute = -1,
+ .gpio_int_mic_en = -1,
+ .gpio_ext_mic_en = -1,
+};
+
+static struct platform_device seaboard_audio_device = {
+ .name = "tegra-snd-wm8903",
+ .id = 0,
+ .dev = {
+ .platform_data = &seaboard_audio_pdata,
+ },
+};
+
static struct platform_device *seaboard_devices[] __initdata = {
&debug_uart,
&tegra_pmu_device,
@@ -141,6 +164,10 @@ static struct platform_device *seaboard_devices[] __initdata = {
&tegra_sdhci_device3,
&tegra_sdhci_device1,
&seaboard_gpio_keys_device,
+ &tegra_i2s_device1,
+ &tegra_das_device,
+ &tegra_pcm_device,
+ &seaboard_audio_device,
};
static struct i2c_board_info __initdata isl29018_device = {
@@ -152,6 +179,26 @@ static struct i2c_board_info __initdata adt7461_device = {
I2C_BOARD_INFO("adt7461", 0x4c),
};
+static struct wm8903_platform_data wm8903_pdata = {
+ .irq_active_low = 0,
+ .micdet_cfg = 0,
+ .micdet_delay = 100,
+ .gpio_base = SEABOARD_GPIO_WM8903(0),
+ .gpio_cfg = {
+ WM8903_GPIO_NO_CONFIG,
+ WM8903_GPIO_NO_CONFIG,
+ 0,
+ WM8903_GPIO_NO_CONFIG,
+ WM8903_GPIO_NO_CONFIG,
+ },
+};
+
+static struct i2c_board_info __initdata wm8903_device = {
+ I2C_BOARD_INFO("wm8903", 0x1a),
+ .platform_data = &wm8903_pdata,
+ .irq = TEGRA_GPIO_TO_IRQ(TEGRA_GPIO_CDC_IRQ),
+};
+
static void __init seaboard_i2c_init(void)
{
gpio_request(TEGRA_GPIO_ISL29018_IRQ, "isl29018");
@@ -161,6 +208,8 @@ static void __init seaboard_i2c_init(void)
i2c_register_board_info(4, &adt7461_device, 1);
+ i2c_register_board_info(0, &wm8903_device, 1);
+
tegra_i2c_device1.dev.platform_data = &seaboard_i2c1_platform_data;
tegra_i2c_device2.dev.platform_data = &seaboard_i2c2_platform_data;
tegra_i2c_device3.dev.platform_data = &seaboard_i2c3_platform_data;
@@ -204,6 +253,9 @@ static void __init tegra_kaen_init(void)
debug_uart_platform_data[0].mapbase = TEGRA_UARTB_BASE;
debug_uart_platform_data[0].irq = INT_UARTB;
+ seaboard_audio_pdata.gpio_hp_mute = TEGRA_GPIO_KAEN_HP_MUTE;
+ tegra_gpio_enable(TEGRA_GPIO_KAEN_HP_MUTE);
+
seaboard_common_init();
seaboard_i2c_init();
diff --git a/arch/arm/mach-tegra/board-seaboard.h b/arch/arm/mach-tegra/board-seaboard.h
index d8415e1..04a1b2e 100644
--- a/arch/arm/mach-tegra/board-seaboard.h
+++ b/arch/arm/mach-tegra/board-seaboard.h
@@ -17,6 +17,9 @@
#ifndef _MACH_TEGRA_BOARD_SEABOARD_H
#define _MACH_TEGRA_BOARD_SEABOARD_H
+#define SEABOARD_GPIO_TPS6586X(_x_) (TEGRA_NR_GPIOS + (_x_))
+#define SEABOARD_GPIO_WM8903(_x_) (SEABOARD_GPIO_TPS6586X(4) + (_x_))
+
#define TEGRA_GPIO_SD2_CD TEGRA_GPIO_PI5
#define TEGRA_GPIO_SD2_WP TEGRA_GPIO_PH1
#define TEGRA_GPIO_SD2_POWER TEGRA_GPIO_PI6
@@ -31,10 +34,11 @@
#define TEGRA_GPIO_MAGNETOMETER TEGRA_GPIO_PN5
#define TEGRA_GPIO_ISL29018_IRQ TEGRA_GPIO_PZ2
#define TEGRA_GPIO_AC_ONLINE TEGRA_GPIO_PV3
-
-#define TPS_GPIO_BASE TEGRA_NR_GPIOS
-
-#define TPS_GPIO_WWAN_PWR (TPS_GPIO_BASE + 2)
+#define TEGRA_GPIO_WWAN_PWR SEABOARD_GPIO_TPS(2)
+#define TEGRA_GPIO_CDC_IRQ TEGRA_GPIO_PX3
+#define TEGRA_GPIO_SPKR_EN SEABOARD_GPIO_WM8903(2)
+#define TEGRA_GPIO_HP_DET TEGRA_GPIO_PX1
+#define TEGRA_GPIO_KAEN_HP_MUTE TEGRA_GPIO_PA5
void seaboard_pinmux_init(void);
--
1.7.1
More information about the Alsa-devel
mailing list