[alsa-devel] [PATCH v3 1/9] davinci: EMAC support for Omapl138-Hawkboard

Victor Rodriguez vm.rod25 at gmail.com
Tue Oct 19 01:58:14 CEST 2010


On Fri, Oct 15, 2010 at 11:25 AM, Sergei Shtylyov <sshtylyov at mvista.com> wrote:
> Hello.
>
> On 10/15/10 01:44, Victor Rodriguez wrote:
>
>>>> From: Victor Rodriguez<vm.rod25 at gmail.com>
>
>>>> This patch adds EMAC support for the Hawkboard-L138 system
>
>>>> Signed-off-by: Victor Rodriguez<victor.rodriguez at sasken.com>
>
> [...]
>
>>>> diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c
>>>> b/arch/arm/mach-davinci/board-omapl138-hawk.c
>>>> index c472dd8..3ae5178 100644
>>>> --- a/arch/arm/mach-davinci/board-omapl138-hawk.c
>>>> +++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
>>>> @@ -19,6 +19,53 @@
>>>>
>>>>  #include<mach/cp_intc.h>
>>>>  #include<mach/da8xx.h>
>>>> +#include<mach/mux.h>
>>>> +
>>>> +#define HAWKBOARD_PHY_ID               "0:07"
>>>> +
>>>> +static short omapl138_hawk_mii_pins[] __initdata = {
>>>> +       DA850_MII_TXEN, DA850_MII_TXCLK, DA850_MII_COL, DA850_MII_TXD_3,
>>>> +       DA850_MII_TXD_2, DA850_MII_TXD_1, DA850_MII_TXD_0,
>>>> DA850_MII_RXER,
>>>> +       DA850_MII_CRS, DA850_MII_RXCLK, DA850_MII_RXDV, DA850_MII_RXD_3,
>>>> +       DA850_MII_RXD_2, DA850_MII_RXD_1, DA850_MII_RXD_0,
>>>> DA850_MDIO_CLK,
>>>> +       DA850_MDIO_D,
>>>> +       -1
>>>> +};
>>>> +
>>>> +static int __init omapl138_hawk_config_emac(void)
>>>> +{
>>>> +       void __iomem *cfgchip3;
>>>> +       int ret;
>>>> +       u32 val;
>>>> +       struct davinci_soc_info *soc_info =&davinci_soc_info;
>>>> +
>>>> +       if (!machine_is_omapl138_hawkboard())
>>>> +               return 0;
>>>> +
>>>> +       cfgchip3 = DA8XSYSCFG0_VIRT(DA8XX_CFGCHIP3_REG);
>
>>>   Could be initializer...
>
>> I do not understand this
>
>   I mean you could assign 'cfgchip3' right when you declare it.
>
>>>> +       val = __raw_readl(cfgchip3);
>>>> +
>>>> +       val&= ~BIT(8);
>>>> +       ret = davinci_cfg_reg_list(omapl138_hawk_mii_pins);
>>>> +       pr_info("EMAC: MII PHY configured\n");
>
>>>   I think this pr_info() should follow __raw_writel() call.
>
>> Ok
>
>>>> +       if (ret)
>>>> +               pr_warning("%s: "
>>>> +                       "cpgmac/mii mux setup failed: %d\n", __func__,
>>>> ret);
>
>>>   You should return here.
>
>>>> +
>>>> +       /* configure the CFGCHIP3 register for MII */
>>>> +       __raw_writel(val, cfgchip3);
>>>> +
>>>> +       soc_info->emac_pdata->phy_id = HAWKBOARD_PHY_ID;
>>>> +
>>>> +       ret = da8xx_register_emac();
>>>> +       if (ret)
>>>> +               pr_warning("%s: "
>>>> +                       "emac registration failed: %d\n", __func__,
>>>> ret);
>>>> +       return 0;
>
>>>   Why this function returns anything at all if it'a always 0, and the
>>> result
>>> is ignored?
>
>>>> @@ -30,6 +77,8 @@ static __init void omapl138_hawk_init(void)
>>>>
>>>>        davinci_serial_init(&omapl138_hawk_uart_config);
>
>>>> +       ret = omapl138_hawk_config_emac();
>>>
>>>   Why assign 'ret', if you're ignoring the result?
>
>> Sorry my mistake I  forgot to check this, please check the nest patch
>> maybe it is a better implementation
>
> [...]
>
>> diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c
>> b/arch/arm/mach-davinci/board-omapl138-hawk.c
>> index c472dd8..35bcea1 100644
>> --- a/arch/arm/mach-davinci/board-omapl138-hawk.c
>> +++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
>> @@ -19,6 +19,53 @@
>>
>>  #include<mach/cp_intc.h>
>>  #include<mach/da8xx.h>
>> +#include<mach/mux.h>
>> +
>> +#define HAWKBOARD_PHY_ID               "0:07"
>> +
>> +static short omapl138_hawk_mii_pins[] __initdata = {
>> +       DA850_MII_TXEN, DA850_MII_TXCLK, DA850_MII_COL, DA850_MII_TXD_3,
>> +       DA850_MII_TXD_2, DA850_MII_TXD_1, DA850_MII_TXD_0, DA850_MII_RXER,
>> +       DA850_MII_CRS, DA850_MII_RXCLK, DA850_MII_RXDV, DA850_MII_RXD_3,
>> +       DA850_MII_RXD_2, DA850_MII_RXD_1, DA850_MII_RXD_0, DA850_MDIO_CLK,
>> +       DA850_MDIO_D,
>> +       -1
>> +};
>> +
>> +static __init void omapl138_hawk_config_emac(void)
>> +{
>> +       void __iomem *cfgchip3;
>> +       int ret;
>> +       u32 val;
>> +       struct davinci_soc_info *soc_info =&davinci_soc_info;
>> +
>> +       if (!machine_is_omapl138_hawkboard())
>> +                       return;
>> +
>> +       cfgchip3 = DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG);
>> +
>> +       val = __raw_readl(cfgchip3);
>> +
>> +       val&= ~BIT(8);
>> +       ret = davinci_cfg_reg_list(omapl138_hawk_mii_pins);
>> +       if (ret)
>> +               pr_warning("%s: "
>> +                       "cpgmac/mii mux setup failed: %d\n", __func__,
>> ret);
>> +                       return;
>
>   Should enclose these two statements in {} and fix indentation.
>
>> +
>> +       /* configure the CFGCHIP3 register for MII */
>> +       __raw_writel(val, cfgchip3);
>> +       pr_info("EMAC: MII PHY configured\n");
>> +
>> +       soc_info->emac_pdata->phy_id = HAWKBOARD_PHY_ID;
>> +
>> +       ret = da8xx_register_emac();
>> +       if (ret)
>> +               pr_warning("%s: "
>> +                       "emac registration failed: %d\n", __func__, ret);
>> +                       return;
>
>   'return' is useless here, and it should've been enclosed into {}...
>
> WBR. Sergei
>

Hi Sergei

Thanks a lot for your feed back I have already fixed

Regards

Victor Rodriguez


More information about the Alsa-devel mailing list