[alsa-devel] [PATCH v3 2/9] davinci: EDMA support for Omapl138-Hawkboard

[Sergei Shtylyov]

On 10/14/10 21:21, vm.rod25 at gmail.com wrote:

> From: Victor Rodriguez<victor.rodriguez at sasken.com>

> This patch adds EDMA support for the Hawkboard-L138 system

> Signed-off-by: Victor Rodriguez<victor.rodriguez at sasken.com>
[...]

> diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
> index 3ae5178..358944b 100644
> --- a/arch/arm/mach-davinci/board-omapl138-hawk.c
> +++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
[...]
> @@ -77,6 +127,11 @@ static __init void omapl138_hawk_init(void)
>
>   	davinci_serial_init(&omapl138_hawk_uart_config);
>
> +	ret = da850_register_edma(da850_edma_rsv);
> +	if (ret)
> +		pr_warning("omapl138_hawk_init: "
> +			"edma registration failed: %d\n", ret);

		pr_warning("%s: EDMA registration failed: %d\n",
			   __func__, ret);

WBR, Sergei