[alsa-devel] [PATCH] ASoC: tpa6130a2: Revisit power-up sequence

[Jarkko Nikula]

There are no known problems with current power-up sequence which first sets
the /shutdown pin high and then enables the supply. However, swap the order
so that the device is kept in shutdown/reset mode during the supply voltage
transition since slowly rising voltages can usually cause problems if the
device is not kept in reset.

Signed-off-by: Jarkko Nikula <jhnikula at gmail.com>
Cc: Peter Ujfalusi <peter.ujfalusi at nokia.com>
---
 sound/soc/codecs/tpa6130a2.c |    7 +++----
 1 files changed, 3 insertions(+), 4 deletions(-)

diff --git a/sound/soc/codecs/tpa6130a2.c b/sound/soc/codecs/tpa6130a2.c
index f9a92ea..9b98107 100644
--- a/sound/soc/codecs/tpa6130a2.c
+++ b/sound/soc/codecs/tpa6130a2.c
@@ -126,16 +126,15 @@ static int tpa6130a2_power(int power)
 
 	mutex_lock(&data->mutex);
 	if (power && !data->power_state) {
-		/* Power on */
-		if (data->power_gpio >= 0)
-			gpio_set_value(data->power_gpio, 1);
-
 		ret = regulator_enable(data->supply);
 		if (ret != 0) {
 			dev_err(&tpa6130a2_client->dev,
 				"Failed to enable supply: %d\n", ret);
 			goto exit;
 		}
+		/* Power on */
+		if (data->power_gpio >= 0)
+			gpio_set_value(data->power_gpio, 1);
 
 		data->power_state = 1;
 		ret = tpa6130a2_initialize();
-- 
1.7.2.3