[alsa-devel] [RFC PATCH 0/5] OMAP/ASoC: McBSP: FIFO handling related fixes
peter.ujfalusi at nokia.com
Mon May 31 10:03:21 CEST 2010
This series aims to correct how the McBSP FIFO is viewed, and handled.
Introduction of the problem:
OMAP McBSP FIFO is word structured:
McBSP2 has 1024 + 256 = 1280 word long buffer,
McBSP1,3,4,5 has 128 word long buffer
This means, that the size of the FIFO
depends on the McBSP word size configuration.
For example on McBSP3:
16bit samples: size is 128 * 2 = 256 bytes
32bit samples: size is 128 * 4 = 512 bytes
It is simpler to place constraint for buffer and period based on channels.
McBSP3 as example again (16 or 32 bit samples):
1 channel (mono): size is 128 frames (128 words)
2 channels (stereo): size is 128 / 2 = 64 frames (2 * 64 words)
4 channels: size is 128 / 4 = 32 frames (4 * 32 words)
Since now the McBSP codec supports not only 16bit samples (32biut has been
recently added), the FIFO size handling is no longer correct, since it has
been hard wired for 16bit word length.
The series changes how the users of McBSP are configuring the FIFO:
It used to be 0 based (0 meant 1 word threshold). After this series users can
configure the threshold in 1 base mode (1 means 1 word threshold).
The platform code now provides the _full_ size of the FIFO in words, instead of
the already limited value used in the past.
In ASoC omap-mcbsp code hw_rule based constraint refinement is going to be used
instead of the hardwired static constraint, which was correct only in case of
16bit word length.
The hw_rule is refining the minimum buffer size based on the channel number
going to be used by the coming stream.
In case of threshold mode additional hw_rule refines the maximum allowed period
The series are generated agains Takashi's sound-2.6: topic/asoc branch.
CCing also Eduardo, and Eero since they have worked on the original
All commetns and testers are welcome!
Peter Ujfalusi (5):
OMAP: McBSP: Function to query the FIFO size
OMAP3: McBSP: Change the way how the FIFO is handled
OMAP3: McBSP: Use the port's buffer_size when calculating tx delay
ASoC: omap-mcbsp: Save, and use wlen for threshold configuration
ASoC: omap-mcbsp: Place correct constraints for streams
arch/arm/mach-omap2/mcbsp.c | 10 ++--
arch/arm/plat-omap/include/plat/mcbsp.h | 2 +
arch/arm/plat-omap/mcbsp.c | 31 ++++++---
sound/soc/omap/omap-mcbsp.c | 112 +++++++++++++++++++++++-------
4 files changed, 114 insertions(+), 41 deletions(-)
More information about the Alsa-devel