[alsa-devel] Echo Indigo card on Sabayon Gentoo

S. Aguinaga sa_jr at yahoo.com
Wed Jan 20 08:15:41 CET 2010

Hello Giuliano,

No luck, same behavior. I edited the first file listed listed below and recompiled it and installed it.
Then I restarted the system with the indigo card in place, and the VU meters show levels in the -120 to -100 dB?

I do have alsa-driver-1.0.22
my kernel is 2.6.31

// Salvador

From: Giuliano Pochini <pochini at shiny.it>
To: S. Aguinaga <sa_jr at yahoo.com>
Sent: Sun, January 17, 2010 4:04:38 PM
Subject: Re: [alsa-devel] Echo Indigo card on Sabayon Gentoo

On Thu, 14 Jan 2010 12:13:55 -0800 (PST)
"S. Aguinaga" <sa_jr at yahoo.com> wrote:

> Hello Fellows, 
> Just downloaded the latest (released)  alsa-lib, alsa-driver, and alsa-utils, but my Indigo card does not work. It has been tested on the same system using the same drivers and on the same system using Fedora 10, that works fine.

First install a recent version of echomixer.

If you are using alsa-driver 1.0.22 or kernel 2.6.32, try to add this line:




or in


and recompile. It re-enables the line-out control that I removed last year
because it was not supposed to exist in that card.



More information about the Alsa-devel mailing list