[alsa-devel] alsactl restore: unknown hardware: ymf724f

Raymond Yau superquad.vortex2 at gmail.com
Sat Feb 27 08:14:01 CET 2010


2010/2/26 Pacho Ramos <pacho at condmat1.ciencias.uniovi.es>

> El vie, 26-02-2010 a las 13:57 +0200, Angel Tsankov escribió:
> > Raymond Yau wrote:
> > > 2010/2/25 Jaroslav Kysela <perex at perex.cz>
> > >
> > >> On Thu, 25 Feb 2010, Angel Tsankov wrote:
> > >>
> > >>> Jaroslav Kysela wrote:
> > >>>> On Thu, 25 Feb 2010, Angel Tsankov wrote:
> > >>>>
> > >>>>> Hello,
> > >>>>>
> > >>>>> I run 'alsactl restore' on a machine with 2 sound cards -- a
> built-in
> > >>>>> Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller
> (rev
> > >>>>> 02) and a non-built-in Yamaha Corporation YMF-724F [DS-1 Audio
> > >>>>> Controller] (rev 03) -- and get the following message:
> > >>>>>
> > >>>>> Unknown hardware: "YMF724F" "SigmaTel STAC9700,83,84"
> "AC97a:83847600"
> > >>>>> "0x1073" "0x000d"
> > >>>>> Hardware is initialized using a guess method
> > >>>>>
> > >>>>> As a consequence the volume levels of the Yamaha card do not get
> > >>>>> restored to the levels stored in /etc/asound.state.  The volume
> levels
> > >>>>> of the built-in card however are properly restored.  The
> asound.state
> > >>>>> file has been created by executing 'alsactl store'.
> > >>>>>
> > >>>>> The kernel has been built with support for ALSA.  I've built and
> > >>>>> installed the kernel modules for both cards (not the ones in the
> > >>>>> alsa-driver package but those that come with kernel version
> 2.6.30.2).
> > >>>>> Any ideas why alsactl cannot find the hardware it has previously
> > >>>>> identified as "YMF724F", "SigmaTel STAC9700,83,84", and so on?
> > >>>> The logic of alsactl is to restore the state from /etc/asound.state
> if
> > >> it
> > >>>> is valid. It seems like the set_controls() function in
> alsactl/state.c
> > >>>> returns an error code for a reason.
> > >>>>
> > >>>> Could you try to compile the latest alsa-utils snapshot
> > >>>> (http://www.alsa-project.org/snapshot/) and run './alsactl -d
> restore'
> > >> in
> > >>>> alsa-utils/alsactl directory? A warning (fail reason) should be
> printed.
> > >>> I've attached a bash shell script that I used to download, configure,
> > >>> compile, and run alsactl.  I've also attached a .log file with stdout
> and
> > >>> stderr that I got while executing the script.
> > >> Thanks. I've added more debug print lines to state.c. Could you rerun
> your
> > >> script and append also '/etc/asound.state' file and output from
> > >> 'alsa-info.sh --no-upload' to your output tarballs? Send me this
> tarball
> > >> privately or just an URL to this list.
>
>
> Looks similar to my problem:
> http://www.spinics.net/lists/alsa-devel/msg31422.html
>
>
>
what is the content of your asound.state ?

seem related to this patch if alsactl count those iface_pcm controls

when driver contains more controls than state file. In this case,
initialization procedure should be run

http://git.alsa-project.org/?p=alsa-utils.git;a=commitdiff;h=05f78cc6811110156c701fd9a2a5d15de8b4b1c7;hp=6232f1c96cde1fee247e95cd97235c48cc7b168d


More information about the Alsa-devel mailing list