[alsa-devel] [PATCH 0/7] WM8580 updates

[Seungwhan Youn]

On Sun, Aug 15, 2010 at 8:10 PM, Mark Brown
<broonie at opensource.wolfsonmicro.com> wrote:
> On Sun, Aug 15, 2010 at 06:21:08PM +0900, Seungwhan Youn wrote:
>
>>  o Capture test ; it doesn't work, even after capture, playback also
>> doesn't work.
>
> This doesn't match up with my testing at all, especially the impact on
> playback.  What revision of the SMDK hardware are you using?
>

Test Environments

SMDK6410 board
 - CPU board Rev. 1.0
 - Base board Rev. 1.0 (2008.07.23)

Board switch settings
 - CPU board ; CFG6 - 1111 (all on)
 - Base board
    - CFG1 - 0000 (all off)
    - CFG2 - 1000 (only 1 pin is on, others off)
    - CFG5 - set I2SMULTI_CDCLK (pin 1-2 connected)

Kernel
  - repos ; git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6.git
  - branch ; for-2.6.37
  - pull time ; 2010-08-16 17:36
  - config ; Add I2S driver and ALSA as a static into kernel(not a
module), and remove AC97.


Test Process and Log capture...
--
Starting kernel ...

Uncompressing Linux... done, booting the kernel.
Linux version 2.6.35-rc1-81021-gec62dbd (claude at starstone) (gcc
version 4.4.1 (Sourcery G++ Lite 2000
CPU: ARMv6-compatible processor [410fb766] revision 6 (ARMv7), cr=00c5387f
CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Machine: SMDK6410
Ignoring unrecognised tag 0x41001099
Memory policy: ECC disabled, Data cache writeback
CPU S3C6410 (id 0x36410101)
S3C24XX Clocks, Copyright 2004 Simtec Electronics
...
mmc0: Minimum clock frequency too high for identification mode
s3c6400_setup_sdhci_cfg_card: CTRL 2=c0004100, 3=80808080
asoc: wm8580-hifi-playback <-> s3c64xx-iis-v4 mapping ok
asoc: wm8580-hifi-capture <-> s3c64xx-iis-v4 mapping ok
ALSA device list:
  #0: smdk64xx
VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
...
Samsung SMDK Board on a armv6l
Samsung login: root
login[981]: root login on 'ttySAC0'
[root at Samsung ~]# aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: smdk64xx [smdk64xx], device 0: Playback wm8580-hifi-playback-0 []
  Subdevices: 1/1
  Subdevice #0: subdevice #0
[root at Samsung ~]# speaker-test -tsine

speaker-test 1.0.15

Playback device is default
Stream parameters are 48000Hz, S16_LE, 1 channels
Sine wave rate is 440.0000Hz
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 2048 to 32768
Period size range from 1024 to 2048
Using max buffer size 32768
Periods = 4
was set period_size = 2048
was set buffer_size = 32768
 0 - Front Left
Time per period = 2.326402
 0 - Front Left
Time per period = 2.986289
 0 - Front Left

--> In this point, I can hear clear sound of sine wave so I pushed
'ctrl+c' to stop it.

[root at Samsung ~]# arecord -Dhw:0 -d5 -fS16_LE -r48000 -c2 > /tmp/tmp.wav
arecord: main:546: audio open error: No such device
[root at Samsung ~]# arecord -Dhw:0,1 -d5 -fS16_LE -r48000 -c2 >
/tmp/tmp.wav
Recording WAVE 'stdin' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo
s3c2412_snd_lrsync: timeout
s3c64xx-iis-v4 s3c64xx-iis-v4: RXDIS: Invalid MODE 0 in IISMOD
arecord: pcm_read:1347: read error: Connection timed out
[root at Samsung ~]# arecord -Dhw:0,1 -d5 -fS16_LE -r8000 -c2 > /tmp/tmp.wav
Recording WAVE 'stdin' : Signed 16 bit Little Endian, Rate 8000 Hz, Stereo
[root at Samsung ~]# aplay /tmp/tmp.wav
Playing WAVE '/tmp/tmp.wav' : Signed 16 bit Little Endian, Rate 8000 Hz, Stereo
[root at Samsung ~]# arecord -Dhw:0,1 -d5 -fS16_LE -r48000 -c2 >
/tmp/tmp.wav
Recording WAVE 'stdin' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo
s3c2412_snd_lrsync: timeout
s3c64xx-iis-v4 s3c64xx-iis-v4: RXDIS: Invalid MODE 0 in IISMOD
arecord: pcm_read:1347: read error: Connection timed out
[root at Samsung ~]# speaker-test -tsine

speaker-test 1.0.15

Playback device is default
Stream parameters are 48000Hz, S16_LE, 1 channels
Sine wave rate is 440.0000Hz
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 2048 to 32768
Period size range from 1024 to 2048
Using max buffer size 32768
Periods = 4
was set period_size = 2048
was set buffer_size = 32768
 0 - Front Left
s3c2412_snd_lrsync: timeout
s3c64xx_dma_stop: channel still active
Write error: -110,Connection timed out
xrun_recovery failed: -110,Connection timed out
Transfer failed: Operation not permitted

--> I didn't do anything, but stopped with noise...

[root at Samsung ~]#
--

Best Regards,
Claude