[alsa-devel] [PATCH 4/7] ASoC: Automatically calculate clock ratio for WM8580
jassisinghbrar at gmail.com
Mon Aug 16 06:36:50 CEST 2010
On Sun, Aug 15, 2010 at 8:09 PM, Mark Brown
<broonie at opensource.wolfsonmicro.com> wrote:
> What would be much more straightforward for this configuration is to run
> the PLL output from the CODEC into the CPU and then have the CPU master
> the actual audio interface but Jassi was fairly insistent on having the
> CODEC master the bus and I'd need to verify again with the schematic if
> the appropriate clock lines are run. Actually, I think I'll just do
> that if the hardware allows.
For us, having CPU in slave mode is more important than clearing all the
use cases perfectly on a _reference_ platform.
More so when the 'problem' can be obviously attributed to the h/w design.
So please modify only if you must, otherwise, as I said, we'd prefer
CPU slave mode working
by default in mainline.
More information about the Alsa-devel