[alsa-devel] WM8731 using I2S on omap3 McBSP2 issues

[Rick Bronson]

> You shouldn't need to touch the DMA code itself, it's normally an issue
> with the clocks and/or the pinmux code not managing to get the signals
> required to clock the data transfer.

  I noticed the dma code has been changed from what I have.

  Also noticed that the beagleboard is getting DMA interrupts when I
"aplay":

cat /proc/interrupts | grep DMA

 12:       4646        INTC  DMA   

  but I'm not.  As I mentioned, I'm at "2.6.29-rc3-omap1", anyone
think there is a problem with pcm DMA's in that version?

  Thanks

  Rick