[alsa-devel] [PATCH 5/8] board-rx51-peripherals: split vaux3 and vmmc2 supplies
tony at atomide.com
Fri Oct 16 18:14:41 CEST 2009
* Mark Brown <broonie at opensource.wolfsonmicro.com> [091015 02:01]:
> On Wed, Oct 14, 2009 at 10:15:48AM -0700, Tony Lindgren wrote:
> > * Mark Brown <broonie at opensource.wolfsonmicro.com> [091012 02:18]:
> > > On Mon, Oct 12, 2009 at 11:08:58AM +0300, Eduardo Valentin wrote:
> > > > I'm afraid using dev_name is not that easy. The mmc driver generates device
> > > > name at runtime. That's why this board file setups .dev at runtime as well.
> > > > So, changing this supply to something static using .dev_name it is not
> > > > possible with current code. That would need refactoring the whole mmc and
> > > > hsmmc setup. And the device naming procedure is dependent on cpu as well.
> > > > Check arch/arm/mach-omap2/device.c:omap2_init_mmc.
> > > same answer each time it's run? How does this work with the clock API?
> > The clocks are matched using clkdev. Basically the driver just requests
> > functional clock (fck) and interface clock (ick):
> > $ grep mmci arch/arm/*omap*/clock*.c
> > arch/arm/mach-omap1/clock.c: CLK("mmci-omap.0", "fck", &mmc1_ck, CK_16XX | CK_1510 | CK_310),
> > arch/arm/mach-omap1/clock.c: CLK("mmci-omap.0", "ick", &armper_ck.clk, CK_16XX | CK_1510 | CK_310),
> So this is using the standard dev_name based clkdev matching which
> Eduardo said was impossible for the regulators. Is it just that this
> will actually work fine for the regulators or is there some other magic
> in the OMAP code that joins things up?
Well the mmc regulators are just passed from board-*.c files to
mmc-twl4030.c which does all the low-level init needed. No other
special magic going on.
Eduardro, care to check the dev_name issue one more time?
To unsubscribe from this list: send the line "unsubscribe alsa-devel" in
the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
More information about the Alsa-devel