[alsa-devel] [PATCH] New ASoC Drivers for ADI AD1938 codec
broonie at opensource.wolfsonmicro.com
Fri Jun 19 13:13:36 CEST 2009
On 19 Jun 2009, at 12:05, Mike Frysinger <vapier.adi at gmail.com> wrote:
> On Fri, Jun 19, 2009 at 06:47, Mark Brown wrote:
>> On Fri, Jun 19, 2009 at 05:28:15PM +0800, Barry Song wrote:
>>> 1. add AD1938 codec driver (codec)
>>> 2. add blackfin SPORT-TDM DAI and PCM driver (platform)
>>> 3. add bf5xx board with AD1938 driver (machine)
>> As Liam said you really need to submit this as a patch series rather
>> than as a single big patch - as your commit log here indicates you've
>> got several different things going on here.
> blah, i had this queued locally with a "todo:split". wanted to wait
> for Barry to finish developing the driver first though.
> at any rate, i hate to sound like a broken record wrt my alsa
> ignorance, but i'm thinking the logical split would be like Barry
> numbered it -- one patch for sound/codec/, one patch for the TDM
> transport, and one patch for hooking up the AD1938 to TDM.
Yes, though if the new DAI format had been required it would be worth
considering a separate patch for it.
>>> +static int __devinit ad1938_spi_probe(struct spi_device *spi)
>>> + spi->dev.power.power_state = PMSG_ON;
>>> + ad1938_socdev->card->codec->control_data = spi;
>>> + return 0;
>>> +static int __devexit ad1938_spi_remove(struct spi_device *spi)
>>> + return 0;
>> Your device probing should all be restructured so that the SPI device
>> for the CODEC is registered as any other SPI device rather than being
>> set up as part of probing the ASoC device. See the wm8731 driver for
>> an example of doing this for a SPI device.
>> This will require that the arch code for any systems with the ad1938
>> do the setup of the device.
> so should sound/soc/blackfin/bf5xx-ad1938.c even exist in the first
> place ?
Yes. It is needed in order to specify how things are hooked up on a
More information about the Alsa-devel