[alsa-devel] [PATCH] cmi8330: Allow MPU-401-less operation

Ondrej Zary linux at rainbow-software.org
Tue Jul 7 18:09:48 CEST 2009


Adding MPU-401 support to cmi8330 driver could cause a regression (non-working 
sound) on a system where there is no free IRQ for the MPU-401 device (which 
is not very uncommon as this card requires two separate IRQs plus a third one 
for MPU-401).


When MPU-401 PnP configuration fails (mostly because of unavailable IRQ), just 
ignore MPU-401 and continue without it.

Signed-off-by: Ondrej Zary <linux at rainbow-software.org>

--- linux-test/sound/isa/cmi8330.c	2009-07-06 22:39:24.000000000 +0200
+++ linux-2.6.30-pentium/sound/isa/cmi8330.c	2009-07-06 22:39:09.000000000 
+0200
@@ -389,12 +389,12 @@
 	pdev = acard->mpu;
 
 	err = pnp_activate_dev(pdev);
-	if (err < 0) {
-		snd_printk(KERN_ERR "MPU-401 PnP configure failure\n");
-		return -EBUSY;
+	if (err < 0)
+		snd_printk(KERN_ERR "MPU-401 PnP configure failure: will be disabled\n");
+	else {
+		mpuport[dev] = pnp_port_start(pdev, 0);
+		mpuirq[dev] = pnp_irq(pdev, 0);
 	}
-	mpuport[dev] = pnp_port_start(pdev, 0);
-	mpuirq[dev] = pnp_irq(pdev, 0);
 	return 0;
 }
 #endif


-- 
Ondrej Zary


More information about the Alsa-devel mailing list