[alsa-devel] Very faint sound on Dell Latitude E6500

Takashi Iwai tiwai at suse.de
Fri Jan 30 12:55:39 CET 2009


At Fri, 30 Jan 2009 12:38:57 +0100,
Laurent Pinchart wrote:
> 
> On Friday 30 January 2009, Takashi Iwai wrote:
> > At Thu, 29 Jan 2009 22:33:19 +0100, Laurent Pinchart wrote:
> > > On Thursday 29 January 2009, Takashi Iwai wrote:
> > > > At Thu, 29 Jan 2009 02:47:45 +0100, Laurent Pinchart wrote:
> > > > > On Wednesday 28 January 2009, Takashi Iwai wrote:
> > > > > > At Tue, 27 Jan 2009 16:51:56 +0100, Laurent Pinchart wrote:
> > > > > > > Hi everybody,
> > > > > > >
> > > > > > > I've received a brand new Dell Latitude E6500 and found out that
> > > > > > > the sound card wasn't exactly well supported by ALSA.
> > > > > > >
> > > > > > > Sound is barely audible (so faint that I'm not even sure if the
> > > > > > > proper sound is output or if I just get garbage), with some loud
> > > > > > > noise here and there that seem to correspond to the saturated
> > > > > > > audio data  parts.
> > > > > > >
> > > > > > > The sound card is an HDA-Intel with an IDT 92HD71B7X codec.
> > > > > > > Hardware information can be found at
> > > > > > > http://www.alsa-project.org/db/?f=30cac30e5b1ddd9c842481a830c250c
> > > > > > >c3e5 93b0 d. A
> > > > > >
> > > > > > Please run with --no-upload and included the result in the post.
> > > > >
> > > > > Done, output included in this e-mail.
> > > > >
> > > > > > Anyway, this problem might be related with the volume-knob.
> > > > > > Install hda-verb and try the following
> > > > > >
> > > > > > 	hda-verb /dev/snd/hwC0D0 0x28 SET_VOLUME_KNOB 0xff
> > > > > > or
> > > > > > 	hda-verb /dev/snd/hwC0D0 0x28 SET_VOLUME_KNOB 0
> > > > >
> > > > > Unfortunately none of those make a difference.
> > > >
> > > > After doing this, check /proc/asound/card0/codec* whether this node
> > > > 0x28 is really changed.
> > >
> > > Yes it does (the range is 0x00-0x7f and not 0x00-0xff).
> >
> > The bit 7 is to specify the direct mode.
> > Maybe we need to select the input of the widget beforehand:
> >
> > 	% hda-verb /dev/snd/hwC0D0 0x28 SET_CONN 1
> > 	% hda-verb /dev/snd/hwC0D0 0x28 SET_VOLUME_KNOB 0xff
> 
> I'm afraid it doesn't make any difference either.

Did you check proc output and see any difference at all?


Takashi


More information about the Alsa-devel mailing list