[alsa-devel] asoc: s3c24xx+uda1380 - some questions
anarsoul at gmail.com
Tue Jan 27 21:14:36 CET 2009
On 27 January 2009 22:00:52 Mark Brown wrote:
> On Tue, Jan 27, 2009 at 06:22:25PM +0200, Vasily Khoruzhick wrote:
> > Btw, on rx1950 there're 4 gpio pins involved:
> > GPJ0 controls codec power
> > GPA1 controls amplifier power
> > GPG12 is jack sense pin, it's value depends whether headphone jack is
> > inserted
> You might want to have a look at the jack reporting API that was
> recently added, it should save you a bit of code:
> It'll need a little helper for GPIOs adding to the core but that should
> be reusable.
Ok, thanks for advice
> Hrm. The completion makes this look more like it could use a full blown
> regulator - it's certainly a pattern that will get reused often enough.
It's commented out, I don't use completions anymore.
> > /* configure some gpios */
> > s3c2410_gpio_cfgpin(S3C2410_GPD0, S3C2410_GPIO_OUTPUT);
> > s3c2410_gpio_cfgpin(S3C2410_GPG12, S3C2410_GPIO_IRQ);
> > s3c2410_gpio_cfgpin(S3C2440_GPJ0, S3C2410_GPIO_OUTPUT);
> The S3C24xx now supports gpiolib so you should be able to use that - the
> platform specific GPIO API will probably get killed at some point.
Yep, but s3c24xx gpiolib doesn't support all gpio pins, especially port J :)
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Size: 197 bytes
Desc: This is a digitally signed message part.
Url : http://mailman.alsa-project.org/pipermail/alsa-devel/attachments/20090127/d1fa290c/attachment.sig
More information about the Alsa-devel