[alsa-devel] HP pavilion dv5 1110ew - no hdmi sound

Takashi Iwai tiwai at suse.de
Sat Feb 14 18:03:41 CET 2009


At Sat, 14 Feb 2009 15:53:26 +0100,
Bartłomiej Holdenmayer wrote:
> 
> Dnia 2009-02-14, sob o godzinie 15:28 +0100, Vedran Miletić pisze:
> > On Sat, Feb 14, 2009 at 3:22 PM, Bartłomiej Holdenmayer <bh at habah.com> wrote:
> > > I am not sure if do everything properly.
> > >
> > > 1. I did installation of alsa snap with script
> > > AlsaUpgrade-1.0.x-rev-1.16.sh;
> > >
> > > 2. After that, I changed last line in /etc/modprobe.d/alsa-base from:
> > > options snd-hda-intel enable_msi=1
> > >
> > > into:
> > > options snd-hda-intel enable_msi=1 probe_mask=0x1ff
> > >
> > >
> > > 3. After I restarted alsa with  /etc/init.d/alsasound stop
> > > and
> > > /etc/init.d/alsasound start
> > >
> > > and get message:
> > > Starting sound driver: snd-hda-intel done
> > >
> > > Am I doing that properly? What should I do (what command) to see
> > > hda_intel: codec_mask forced to 0xff
> > >
> > >
> > > --
> > > Pozdrawiam / Regards
> > > Bartłomiej Holdenmayer
> > >
> > > GG:541634; ICQ:33920811; skypename:bartlomiejholdenmayer
> > >
> > > _______________________________________________
> > > Alsa-devel mailing list
> > > Alsa-devel at alsa-project.org
> > > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
> > >
> > 
> > Did you try installing snapshot manually? Script could be bad.
> > 
> > Vedran
> > _______________________________________________
> > Alsa-devel mailing list
> > Alsa-devel at alsa-project.org
> > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
> 
> I checked script. It is downloading good snapshot.
> 
> There are other options in script:
> ./configure --with-kernel=/usr/src/linux-headers-$KERNEL
> --with-cards=all --with-card-options=all --with-sequencer=yes
> --with-oss=yes --prefix=/usr || die "$DRIVER configure failed"
> 
> I guess everything is ok. I attach the script.

After you load the latest driver with that probe_mask option, check
the "kernel messages" (i.e. run dmesg command).  It's not about the
message from modprobe.


Takashi


More information about the Alsa-devel mailing list