[alsa-devel] No sound for HP Pavilion DV4z

[Bartłomiej Holdenmayer]

Dnia 2009-02-12, czw o godzinie 01:43 +0100, Takashi Iwai pisze:
> At Thu, 12 Feb 2009 01:29:40 +0100,
> Bartłomiej Holdenmayer wrote:
> > 
> > Dnia 2009-02-12, czw o godzinie 00:51 +0100, Takashi Iwai pisze:
> > > At Thu, 12 Feb 2009 00:43:52 +0100,
> > > Bartłomiej Holdenmayer wrote:
> > > > 
> > > > Dnia 2009-02-11, śro o godzinie 23:58 +0100, Takashi Iwai pisze:
> > > > > At Wed, 11 Feb 2009 22:15:30 +0000 (UTC),
> > > > > aeleneski at comcast.net wrote:
> > > > > > 
> > > > > > Alright. Well, it again seems like a no go.
> > > > > > Ran all the commands, still no sound. Upon starting Amarok, I receive the
> > > > > > error "xine was unable to initialize any audio drivers."
> > > > > 
> > > > > Could you try the patch below?
> > > > > 
> > > > > Or, first load without probe_mask=1 option, give the command sequence
> > > > > and do echo to reconfig file.
> > > > > 
> > > > > 
> > > > > thanks,
> > > > > 
> > > > > Takashi
> > > > > 
> > > > > ---
> > > > > diff --git a/sound/pci/hda/hda_hwdep.c b/sound/pci/hda/hda_hwdep.c
> > > > > index 300ab40..482fb03 100644
> > > > > --- a/sound/pci/hda/hda_hwdep.c
> > > > > +++ b/sound/pci/hda/hda_hwdep.c
> > > > > @@ -175,7 +175,7 @@ static int reconfig_codec(struct hda_codec *codec)
> > > > >  	err = snd_hda_codec_build_controls(codec);
> > > > >  	if (err < 0)
> > > > >  		return err;
> > > > > -	return 0;
> > > > > +	return snd_card_register(codec->bus->card);
> > > > >  }
> > > > >  
> > > > >  /*
> > > > > _______________________________________________
> > > > > Alsa-devel mailing list
> > > > > Alsa-devel at alsa-project.org
> > > > > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
> > > > 
> > > > Can You explain what to do like for 6 years old kid?
> > > 
> > > Well, I already merged the patch to sound git tree, so you just need
> > > to use the latest alsa-driver snapshot tree again from:
> > >     ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/alsa-driver-snapshot.tar.gz
> > > 
> > > 
> > > Takashi
> > > _______________________________________________
> > > Alsa-devel mailing list
> > > Alsa-devel at alsa-project.org
> > > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
> > 
> > I did upgrade. No change. aplay -l still does not display hdmi.
> 
> Then give alsa-info output again.
> Also, load with probe_only=1 option first and get alsa-info, too.
> Attach together with the relevant kernel messages.
> 
> 
> Takashi
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel at alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

I am sorry, i messed up threads. I was writing about pavilion dv5. I
have problem with hdmi. Should i do what You wrote: 
> Also, load with probe_only=1 option first and get alsa-info, too.
> Attach together with the relevant kernel messages.
?

-- 
Pozdrawiam / Regards
Bartłomiej Holdenmayer

GG:541634; ICQ:33920811; skypename:bartlomiejholdenmayer